TCL4 9" Clear Locker Door Keep storage areas dry with this tried, tested, and trusted black clear locker door/deck hatch. Features: Allows for easy inspection without having to open the door Measurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Polycarbonate Locking Ring: Acetal Seal: Nitrile

TCL4 9" Locker Door - Black Keep storage areas dry with this tried, tested, and trusted black Whale locker door/deck hatch. Features: Reliable watertight seal Measurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Polycarbonate Locking Ring: Acetal  Seal: Nitrile

TCL2 9" Locker Door - Diecast Aluminum Keep storage areas dry with this tried, tested, and trusted aluminum Whale locker door/deck hatch. Features: Robust aluminum construction with a locking lever  Ideal for harsh marine environments Measurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Diecast aluminum alloy Seal: Nitrile

GP1203 SailPod Precut for Raymarine c125/c127 & e125/e127 for 9.5" Wide Guard GP1200 Series for 9.5" Guard, SailPods for sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. All SailPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners and wrench Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets

GP1900-09 SailPod Pre-Cut for Raymarine c95/c97/e95/e97 for 9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

GP1512 SystemPod Pre-Cut for Raymarine e7/e7D & 1 Instrument for 9.5" Wide Guard GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP1604 SystemPod Pre-Cut for Raymarine e7/e7D & 2 Instruments for 9.5" Wide Guard GP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Usable Face: 20"W x 6.25"H Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP1170-05 SystemPod Pre-Cut for Raymarine es127/es128 2 Instruments for 9.5" Wide Guard Instrument Cut Out: 3.6" Holes The NavPod GP1170 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods. *See Literature tab for an image with dimensions

GP1809 SailPod Precut for Raymarine c95/c97 & e95/e97 for 9.5" Wide Pedestal Guard Part #: GP1809 NavPod Protects Your Electronics In Harsh Conditions The GP1809 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 9.5" wide pedestal guard.

PED4900-09 PedestalPod Pre-Cut for Raymarine c95, c97, e95 & e97 for 9.5" Wide Guard - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.  Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrThere are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.ench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.

Dual Actuator Marine Hardware Pack High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine / Boat Hardware We offer a full selection of marine hardware, including anchor rollers, anodes, ski tows, vents, and more. If you have a boat and need hardware, you are in the right place. From chocks and cleats to shaft seals and steering wheels, you can count on us for your boat hardware needs. It can sometimes be difficult to find everything you need for your boat, especially all in one place, but our full service site gives you plenty of excellent options for all the hardware you will need for your boating excursion.   Bow & stern eyes, deck fills, deck plates, and engine mounts are all available here, along with gas springs, grab handles, and hatches. We also have a wide assortment of hinges, hooks & clamps, and latches so you can find just the right option for your boat. With oarlocks, rail fittings, rub rail, shaft couplers, and swim platforms, as well as a selection of rope & chain pipe, you can find the things you need the most. We also have a selection of marine lumber, including teak. By using teak lumber for your marine needs, you have a great wood look that will hold up to the elements, and you can get it right here with all your marine hardware.

Entry Sensor for Siren 3 Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed. Features: Compatible with Siren 3 Pro only Includes Wireless Sensor Module and Open/Close Magnet

Watch the Weather.   Even the best-laid plans for the perfect boating outing can be turned upside down by Mother Nature. Watch the sky. Know what to look for in clouds. Be very conscientious about spotting lightning. It never hurts to know as much as you can about the weather. Courses are available at local colleges and online on what to look for in the sky and plan for weather fronts that can change on a dime.   The odds of your boat being struck by lightning are about one in 1,000. However, your odds are skewed, depending on your location. If you are in Montana, you have good chances that it won't happen, but in a popular boating state like Florida, surrounded by water, you will have less luck. One-third of the country's lightning insurance claims are filed in Florida.     According to William J. Becker, University of Florida IFAS Extension, in a report for the National Association of State Departments of Agriculture, NASDA, Florida averages more than ten deaths and thirty injuries from lightning per year. Approximately fifty percent of the deaths and injuries occur to individuals involved in recreational activities. Nearly forty percent of those are water-related: boating, swimming, surfing, and others.   Sailboats are more likely to be struck than powerboats because lightning is attracted to the mast. In the powerboat category, trawlers are struck more than other powerboats.   What is Happening When Lightning Strikes?   Becker describes it as, "The upper portion of the cloud develops a positive electrical charge, the lower level a negative electrical charge.  Because it is a poor conductor of electricity, the air restricts the regular flow of electricity between these, attracting electrical charges. While this phenomenon is occurring in the clouds, a similar event is occurring on the surface. Negative charges repel negative charges and attract positive charges. So, as a thunder cloud passes overhead, a concentration of positive charges accumulates in and on all objects below the cloud. Since these positive charges are attempting to reach the negative charge of the cloud, they tend to accumulate at the top of the highest object around. On a boat that maybe the radio antenna, the mast, a fishing rod, or a person!"   Lightening makes its own Schedule.   While you can take steps to lessen the damage lightning will cause, you can't prevent a strike.   What happens when your boat is Struck?   NOAA, the National Oceanic and Atmospheric Administration, www.noaa.gov., estimates a strike contains around 30,000,000 volts. Your boat's electronics are most susceptible to damage. Most 12-volt electronics will be damaged, if not all, electronics on your vessel.   At times, the strike will hopscotch around the boat, and collateral damage occurs when a nearby vessel gets hit, either the result of the lightning's powerful electromagnetic field or the current induced by the field running through the boat's shore-power cord. Some electronics will be damaged; others will not. Check your compass. There may be no external damage, but the compass heading significantly affected.   Precautions to Reduce Personal Injury and Damage from Lightening.   When a thunderstorm of any kind is approaching, whether lightning is present or not; Get everyone out of the water – scuba divers, swimmers, jet skiers, and stop any fishing activities. Stay in the center of the cabin of the boat. Keep arms and legs in the boat.    There is no such thing as a boat being lightning proof, but you can take steps to make your vessel lightning protected. Most pleasure craft are made of fiberglass or wood, not providing the automatic grounding protection offered by metal-hulled craft. When lightning strikes a small boat, the electrical current is searching for any route to ground, including the human body, an excellent conductor of electricity.     Major lightning protective equipment includes an air terminal, main conductor, and a ground plate. Secondary components are secondary conductors, lightning arrestors, lightning protective gaps, and connectors. Lightning arrestors and lightning protective gaps are used to protect radios and other electronic equipment, which are subject to electrical surges.   If a sailboat mast is made of conductive material, a conductor securely fastened to the mast and extending six inches above the mast and terminating in a receiving point, or a radio antenna can serve as the air terminal.   Captain Chuck Reed, and his wife, Linda, sailed their 36' Catalina sailboat from Detroit to the Caribbean and lived aboard for three years. Reed, the owner of CLR Marine, used a shaft saver on Silent Dream to to keep the boat totally ungrounded, and also save the prop shaft if a line got wrapped around it. Yes, it did save the prop shaft one time and being totally ungrounded he feels that it did save them from the lightning. The Reeds encountered many thunderstorms that included lightning, their boat did not suffer any damage due to lightning.   The National Fire Protection Association, Lightning Protection Code   For a more detailed summary of how to protect your boat from a lightning strike, refer to the National Fire Protection Association's Lightning Protection Code. www.nfpa.org.   Shaft Savers are available at https://www.clrmarine.com/462m4/marine-hardware/shaft-couplers.html    Watch the weather. Stay safe.    Fair Winds and Smooth Sailing   To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.   ----------------------------------------------------------------------------------   Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com    

  Since 1966, Schaefer Marine has stood at the forefront of Marine hardware design and engineering. Schaefer's entire line of products, from blocks to furlers, are built of the finest materials available and designed with a real-world understanding of the forces at work on a sailing yacht. All Schaefer products are designed and intended for use on sailboats for specific stated applications. There is no name in marine hardware more trusted than Schaefer. Check out Schaefer for Legendary Strength & Legendary Performance!     Schaefer manufacturers a wide variety of deck hardware from cam cleats, investment cast padeyes, welded pad eyes, stanchions, eye straps, cleats, chocks and more. Schaefer uses only the finest aluminum and Stainless Steel available and every piece is engineered to work well and is reliable for years of trouble free service.           Specials    Closeouts   Remanufactured    Rebates