Yamada 632770 Spring Pin

Yamada 700231 Pin

9-M360-2-DDI-Y - MEGA 360 & 2D/MDI 7-Pin Y-Cable This Y cable allows for the connection a MEGA 360 Imaging transducer and an external 7-pin HW / MDI+ transducer to the same compatible HELIX fish finder.  Combines MEGA 360 Imaging transducer and 7-pin Dual Spectrum/MEGA Imaging+ transducers into one 7-pin transducer plug for connection to the same, compatible HELIX fish finder. For use when connecting a MEGA 360 Imaging transducer to a HELIX fish finder, in conjunction with an external 7-pin HW / MDI+ transducer. This cable should not be use to connect a HELIX fish finder with both MEGA 360 Imaging and Built-In MEGA Imaging on Minn Kota trolling motors. Please refer to #720108-1 14 M360 2DDI Y for this specific rigging need. Is not compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side 1-Year Limited Warranty

14-M360-2DDI-Y - MEGA 360 & 2D/MDI 14-Pin Y-Cable This Y cable allows for the connection of a MEGA 360 Imaging transducer and a 14-pin HW / MDI+ transducer (including Built-in MEGA Imaging) to the same compatible Humminbird fish finder.  Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter. For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin HW /MDI+ transducer. If this cable is being used with a HELIX fish finder, then the #720106-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable. Compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side Waterproof, screw-on, 14-pin connectors 1-Year Limited Warranty

Yamada K80-AM-DP-HD Air Motor Reseal Kit THE DP-80-HD AIR MOTOR RESEAL KIT CONTAINS,  (8) 640007 O'Ring (2) 640023 O'Ring (2) 640133 O'Ring (2) 640134 O'Ring (2) 640138 O'Ring (2) 684537 Spring (2) 773066 Throat Bearing (1) 773047 Center Rod Guide (2) 773040 Gasket (2) 773041 Gasket (4) 773067 Bushing (2) 700231 Pin

Yamada 631421 Spring Washer 38 50 75

Yamada 708666 Spring 20/25

Yamada 709319 Spring 5 Pilot Valve

Yamada 710577 Spring For Pilot Valve 15

Yamada 711612-4 C Spring

Yamada 711937 Pilot Valve Spring

Yamada NDP-20D Drm Pmp Kit Ndp-20Ba Series 3/4" FLUID PORT Yamada® NDP-20 series AODD pumps provide a maximum flow rate of 31.7 gallons per minute. Pumps are available in aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.   Unified Air Valve Concept – 2 common size air valve assemblies used for 6 sizes of pumps                             Reducing reassembly confusion and parts inventory   Truly No-Lubricated Air Valve – patented air valve on all NDP series pumps Never requires lubrication or pre-packing   Non-Stalling – patented non-centering, 304SS spring-assisted shifter, ensuring a positive shift every time   31.7 Gallons/Minute 3/4" NPT Fluid Port     INTAKE & DISCHARGE CONNECTIONS Polypropylene (PPG) 3/4" Female NPT or 3/4" ANSI Flange B16.5 #150 Aluminum (ADC-12) 3/4" Female NPT Stainless Steel (316) 3/4" Female NPT Air Inlet3/8" Female NPT (includes ball valve) Air Exhaust3/4" Female NPT (includes silencer)     MAXIMUM LIQUID TEMPERATURE1 Buna N 180°F (82°C) Neoprene 180°F (82°C) Santoprene®(TPO) 180°F (82°C) EPDM 212°F (100°C) PTFE 212°F (100°C) Hytrel® (TPE) 248°F (120°C) Viton® fluoroelastomer 248°F (120°C) 1Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.     Air Supply Pressure (All Models)20 to 100 PSI (1.4 to 7 kgf/cm²) Discharge Volume Per Cycle Rubber diaphragm: 0.163 gallons (615 cc) PTFE diaphragm: 0.143 gallons (539 cc)   Maximum Cycles Per Minute Rubber diaphragm: 195 PTFE diaphragm: 195   Maximum Size Solid1/16" (2.0 mm) Maximum Dry Suction LiftRubber-fitted pump capability: 18-feet Air MotorAluminum - Metal Pumps Plastice - Plastic Pumps Optional CoatingPTFE-coated Other OptionsSplit manifold pumps

Yamada K45-AM Air Motor Kit Ndp-40/50 NDP-40/50 AIR MOTOR RESEAL KIT,  (2) 640020 O'Ring,  (2) 685444 Buna V-Packing,  (2) 640029 O'Ring,  (2) 711937 Pilot Valve (Spring 40,50,80),  (1) 771712 Valve Body (Gasket 40,50,80),  (2) 771738 Spool Cap (Gasket 40,50,80),  (2) 771740 Pilot Valve (Seat 40,50,80),  (2) 771742 Gasket 40, 50, 80,  (2) 772689 Nylon Throat Bushing,  (2) 832162 Pilot Valve Assy 40, 50,  (1) 805084 C-Spool Assembly Carbon Filled

Yamada K80-AM Air Kit for NDP-80 Air Motor NDP-80 AIR MOTOR RESEAL KIT,  (2) 640020 O'Ring (2) 685444 Buna V-Packing (2) 640029 O'Ring (2) 711937 Pilot Valve (Spring 40,50,80) (1) 771712 Valve Body (Gasket 40,50,80) (2) 771738 Spool Cap (Gasket 40,50,80) (2) 771740 Pilot Valve (Seat 40,50,80) (2) 771742 Gasket 40, 50, 80 (2) 772689 Nylon Throat Bushing (2) 832163 Pilot Valve Assy 80 (1) C-Spool Assembly Carbon Filled

Yamada NDP-50BAS-AP Pump NDP-50BAS-AP AIR POWERED DOUBLE DIAPHRAGM PUMP Air Operated Double Diaphragm Pump Santoprene Diaphragm Santoprene/EPDM Flat Check Valve / O-Rings Aluminum - Combination fluid port: ANSI Flange with 2" tapped FNPT (ADC-12) Material 164 GPM Max Flow, 2" (NPT or ANSI Flange) Fluid Port, 3/4" Female NPT (includes ball valve) Air Inlet, 1" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor Dimensions: 18.63" W × 32.32"H  Net Wt.: 84 lbs. (38.1 kg) Shipping Wt.: 108 lbs.   Ships Via Truck Contact US for a shipping quote.