|
|
0.58 |
|
|
Yamada NDP-20BST-FDA 1" SS/Tef Pump Fda Complian
Yamada NDP-20BST-FDA FDA Compliant Air Operated Double Diaphragm Pump - 1" TC Connections with Electropolished Stainless Steel Body and FDA PTFE Diaphragms
Features & Benefits : Key features of Yamada® FDA series pumps:
• self-priming, lube-free air valve
• intrinsically safe and portable
• no mechanical seals
• ability to run dry without pump damage
Available in eight sizes from 3 / 4' to 4' ports with flow ranges from 1–215 gallons per minute.
Sanitary Fitting / Flow Rate / Maximum Size Solid
NDP-5-FDA 3 / 4' 3.1 GPM N / A
DP-10-FDA 3 / 4' 6.0 GPM <1 / 32'
NDP-15-FDA 1' 13.5 GPM <1 / 32'
NDP-20-FDA 1' 31.7 GPM <1 / 16'
NDP-25-FDA 1-1 / 2' 46.2 GPM <3 / 16'
NDP-40-FDA 2' 107 GPM <9 / 32'
NDP-50-FDA 2-1 / 2' 164 GPM <5 / 16'
NDP-80-FDA 4' 215 GPM <13 / 32'
FDA Compliant Elastomers
Diaphragm Material Temperature
EPDM* 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPEE) 248°F (120°C)
* EDPM available only for NDP-20 and larger pumps.
Technical Specs
Yamada Pumps NDP-20BST-FDA Type, Model 851523-FDA FDA Compliant Sanitary Pumps Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, 31.7 GPM Max Flow, 3/4' NPT Fluid Port, 3/8' Female NPT (includes ball valve) Air Inlet, 3/4' Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor
Air Exhaust : 3 / 4' Female NPT (includes silencer)
Air Inlet : 3 / 8' Female NPT (includes ball valve)
Air Supply Pressure : 20 to 100 PSI (1.4 to 7 kgf / cm²)
Diaphragm : PTFE
Discharge Volume Per Cycle : 0.163 gallons (615 cc)
Fluid Port : 3 / 4' NPT
Liquid Temperature : 212°F (100°C)
Max Cycles Per Minute : 195
Maximum Flow (GPM) : 31.7 GPM
Max Suction Lift : 18 Feet
Model Number : 851523-FDA
Model Series : FDA Compliant Sanitary Pumps
Motor : Aluminum Air Motor
Sanitary Clamp Size : 1'
Solids (Inches) : 1 / 16' (2.0 mm)
Type : 851523-FDA
|
3569.60 |
|
|
Yamada 590086 Ball/Seat 20 Al SS
|
24.10 |
|
|
Yamada 711703 Ball Guide 25 Fc SS
|
52.79 |
|
|
Yamada NDP-25BST-FDA 1 1/2" SS/Tef Pmp Fda Compl
Yamada NDP-25BST-FDA FDA Compliant Air Operated Double Diaphragm Pump - 1-1/2″ TC Connections with Electropolished Stainless Steel Body and FDA PTFE Diaphragms
Fluid Port 1" NPT
GPM46.2
Discharge Volume Per Cycle
Rubber 0.23 Gallons
PTFE 0.17 Gallons
Air Motor Metal Pump - Aluminum
Plastic Pump - Non-Metallic
Intake & Discharge Connections
Polypropylene (PPG)1" Female NPT or 1" ANSI Flange B16.5 #150
Kynar® (PVDF)1" Female NPT or 1" ANSI Flange B16.5 #150
Aluminum (ADC-12)1" Female NPT
Cast Iron1" Female NPT
Air Inlet3/8" Female NPT (includes ball valve)
Air Exhaust3/4" Female NPT (includes silencer)
|
4259.60 |
|
|
Yamada NDP-15PD Drum Pump Kit
1/2" FLUID PORT
Yamada® NDP-15 series AODD pumps provide a maximum flow rate of 13.5 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction, with a wide variety of diaphragm materials.
13.5 Gallons/Minute
1/2" NPT Fluid Port
INTAKE & DISCHARGE CONNECTIONS
Polypropylene (PPG)11/2" Female NPT
Kynar® (PVDF)21/2" Female NPT
Groundable Acetal21/2" Female NPT
Aluminum (ADC-12)31/2" Female NPT
Stainless Steel (316)31/2" Female NPT
Air Inlet1/4" Female NPT (includes ball valve)
Air Exhaust3/8" Female NPT (includes silencer)
1Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications.
2Kynar® and Groundable Acetal pumps are fitted with flat check valves only.
3Aluminum and Stainless Steel pumps are fitted with ball check valves only.
MAXIMUM LIQUID TEMPERATURE1
Buna N 180°F (82°C)
Neoprene 180°F (82°C)
Santoprene®(TPO) 180°F (82°C)
EPDM 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
1Polypropylene and acetal pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20 to 100 PSI (1.4 to 7 kgf/cm²)
Discharge Volume Per Cycle0.034 gallons (128 cc)
Maximum Cycles Per Minute400
Maximum Size Solid1/32" (1mm)
Maximum Dry Suction LiftFlat-type check valve: 8-feet
Ball-type check valve: 5-feet
Air MotorRyton® air motor standard
Other OptionsSplit manifold pumps
|
259.68 |
|
|
Yamada DP-10BPT 3/8" Poly Teflon Pump
Technical Specifications
Inlet Port: 3/8 inch
Max GPM: 6
Max PSI: 100
Outlet Port: 3/8 inch
RPM: 300Max
Temperature: 180 degrees F
PTFE Seals Polypropylene DP-10 Series Pump
The Yamada DP-10BPT Pump is an air-operated dual diaphragm pump with a maximum flow rate of 6 GPM and a maximum air pressure of 100 PSI. This AODD pump has a polypropylene body and an aluminum motor. The diaphragm, ball valve, and o-rings are made with PTFE material. Versatile pump that stands up to harsh environments.
Specifications:
6 GPM
Diaphragms: PTFE
Ball Valve: PTFE
O-Rings: PTFE
Inlet and Outlet Ports: 3/8" Female NPT
Air Inlet: 1/4" Female NPT (includes ball valve)
Air Exhaust: 3/8" Female NPT (includes silencer)
Maximum Liquid Temperature: 180° Fahrenheit
Air Supply Pressure: 20 to 100 PSI (1.4 to 7 kgf/cm_)
Maximum Solid: 1/32"
Maximum Suction Life: 10 feet
RPM: 300 (cycle speed)
Applications:
Car Wash
Washing/Cleaning Systems
Chemical Delivery/Transfer
Gas/Petroleum
Paints/Dyes
Mining
Printing/Ink
Stone/Clay/Glass
Water Treatment
|
615.00 |
|
|
Yamada NDP-50BAS-AP Pump
NDP-50BAS-AP AIR POWERED DOUBLE DIAPHRAGM PUMP
Air Operated Double Diaphragm Pump
Santoprene Diaphragm
Santoprene/EPDM Flat Check Valve / O-Rings
Aluminum - Combination fluid port: ANSI Flange with 2" tapped FNPT (ADC-12) Material
164 GPM Max Flow, 2" (NPT or ANSI Flange)
Fluid Port, 3/4" Female NPT (includes ball valve)
Air Inlet, 1" Female NPT (includes silencer)
Air Exhaust, Aluminum Air Motor
Dimensions: 18.63" W × 32.32"H
Net Wt.: 84 lbs. (38.1 kg)
Shipping Wt.: 108 lbs.
Ships Via Truck Contact US for a shipping quote.
|
1804.80 |
|
|
Yamada NDP-20BST 3/4" 316SS Teflon Pump
Yamada Pumps NDP-20BST Type, Model 851523 NDP-20 Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, PTFE Flat Check Valve / O-Rings, Stainless Steel (316) Material, 31.7 GPM Max Flow, 3/4" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmPTFE
Discharge Volume Per Cycle0.143 gallons (539 cc)
Fluid Port3/4" NPT
Liquid Temperature212°F (100°C) Max
Material316 Stainless Steel
Max Cycles Per Minute195
Maximum Flow (GPM)31.7 GPM
Max Suction Lift18 Feet
Model Number851523
Model SeriesNDP-20 Models
MotorAluminum Air Motor
Solids (Inches)1/16" dia. (1.6 mm)
Type851523
Valve / Seat / O-RingPTFE
|
1900.80 |
|
|
Yamada NDP-25BAN 1" Alum Buna Pump
Yamada Pumps NDP-25BAN Type, Model 851528 NDP-25 Series, Air Operated Double Diaphragm Pump, BunaN Diaphragm, BunaN Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmBuna-N
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" NPT
Liquid Temperature180°F (82°C) Max
MaterialAluminum (ADC-12)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number851528
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type851528
Valve / Seat / O-RingBuna-N
|
979.20 |
|
|
Yamada NDP-25BAT 1" Alum Teflon Pump
Yamada Pumps NDP-25BAT Type, Model 851531 NDP-25 Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, PTFE Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmPTFE
Discharge Volume Per Cycle0.17 gallons (654 cc)
Fluid Port1" NPT
Liquid Temperature212°F (100°C) Max
MaterialAluminum (ADC-12)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number851531
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type851531
Valve / Seat / O-RingPTFE
|
1171.20 |
|
|
Yamada NDP-25BAV 1" Alum/Viton Pump
Yamada Pumps NDP-25BAV Type, Model 851530 NDP-25 Series, Air Operated Double Diaphragm Pump, Viton Diaphragm, Viton Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmViton
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" NPT
Liquid Temperature248°F (120°C)
MaterialAluminum (ADC-12)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number851530
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type851530
Valve / Seat / O-RingViton (FPM)
|
1387.20 |
|
|
Yamada NDP-25BPE 1" Pump Epdm
Yamada NDP-25BPE 852386, Air Operated Double Diaphragm Pump with EPDM Diaphragm. EPDM Valve & O-Rings, Polypropylene (PPG) Material, 46.2 GPM Max Flow, 1" Female NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Glass-Filled Polypropylene Air Motor & 18 Feet Max Suction Lift.
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmEPDM
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" Female NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number852386
Model SeriesNDP-25 Models
MotorGlass-Filled Polypropylene Air Motor
Solids (Inches)3/16" (4.8 mm)
Valve / Seat / O-RingEPDM
|
1252.80 |
|
|
Yamada NDP-25BPE-PP 1" Pump Epdm
Yamada Pumps NDP-25BPE-PP Type, Model 854173 NDP-25 Series, Air Operated Double Diaphragm Pump, EPDM Diaphragm, EPDM Flat Check Valve / O-Rings, Polypropylene (PPG) - Non-Metallic Center Body Material, 46.2 GPM Max Flow, 1" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmEPDM
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG) - Non-Metallic Center Body
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number854173
Model SeriesNDP-25 Models
MotorAluminum Air Motor
Solids (Inches)3/16" (4.8 mm)
Type854173
Valve / Seat / O-RingEPDM
|
1214.40 |
|
|
Yamada NDP-25BPH 1" Poly Hytrel Pump
Yamada NDP-25BPH 852070, Air Operated Double Diaphragm Pump with Hytrel Diaphragm. Hytrel / Buna-N Valve & O-Rings, Polypropylene (PPG) Material, 46.2 GPM Max Flow, 1" Female NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Glass-Filled Polypropylene Air Motor & 18 Feet Max Suction Lift.
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmHytrel
Discharge Volume Per Cycle0.23 gallons (862 cc)
Fluid Port1" Female NPT
Liquid Temperature180°F (82°C) Max
MaterialPolypropylene (PPG)
Max Cycles Per Minute210
Maximum Flow (GPM)46.2 GPM
Max Suction Lift18 Feet
Model Number852070
Model SeriesNDP-25 Models
MotorGlass-Filled Polypropylene Air Motor
Solids (Inches)3/16" (4.8 mm)
Valve / Seat / O-RingHytrel / Buna-N
|
1310.40 |
|