|
Yamada 1" Strainer W/Wire Mesh
|
55.25 |
|
|
Yamada NDP-20BST 3/4" 316SS Teflon Pump
Yamada Pumps NDP-20BST Type, Model 851523 NDP-20 Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, PTFE Flat Check Valve / O-Rings, Stainless Steel (316) Material, 31.7 GPM Max Flow, 3/4" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
Air Exhaust3/4" Female NPT (includes silencer)
Air Inlet3/8" Female NPT (includes ball valve)
Air Supply Pressure20 to 100 PSI (1.4 to 7 kgf/cm²)
DiaphragmPTFE
Discharge Volume Per Cycle0.143 gallons (539 cc)
Fluid Port3/4" NPT
Liquid Temperature212°F (100°C) Max
Material316 Stainless Steel
Max Cycles Per Minute195
Maximum Flow (GPM)31.7 GPM
Max Suction Lift18 Feet
Model Number851523
Model SeriesNDP-20 Models
MotorAluminum Air Motor
Solids (Inches)1/16" dia. (1.6 mm)
Type851523
Valve / Seat / O-RingPTFE
|
1900.80 |
|
|
Yamada NDP-20BST-FDA 1" SS/Tef Pump Fda Complian
Yamada NDP-20BST-FDA FDA Compliant Air Operated Double Diaphragm Pump - 1" TC Connections with Electropolished Stainless Steel Body and FDA PTFE Diaphragms
Features & Benefits : Key features of Yamada® FDA series pumps:
• self-priming, lube-free air valve
• intrinsically safe and portable
• no mechanical seals
• ability to run dry without pump damage
Available in eight sizes from 3 / 4' to 4' ports with flow ranges from 1–215 gallons per minute.
Sanitary Fitting / Flow Rate / Maximum Size Solid
NDP-5-FDA 3 / 4' 3.1 GPM N / A
DP-10-FDA 3 / 4' 6.0 GPM <1 / 32'
NDP-15-FDA 1' 13.5 GPM <1 / 32'
NDP-20-FDA 1' 31.7 GPM <1 / 16'
NDP-25-FDA 1-1 / 2' 46.2 GPM <3 / 16'
NDP-40-FDA 2' 107 GPM <9 / 32'
NDP-50-FDA 2-1 / 2' 164 GPM <5 / 16'
NDP-80-FDA 4' 215 GPM <13 / 32'
FDA Compliant Elastomers
Diaphragm Material Temperature
EPDM* 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPEE) 248°F (120°C)
* EDPM available only for NDP-20 and larger pumps.
Technical Specs
Yamada Pumps NDP-20BST-FDA Type, Model 851523-FDA FDA Compliant Sanitary Pumps Series, Air Operated Double Diaphragm Pump, PTFE Diaphragm, 31.7 GPM Max Flow, 3/4' NPT Fluid Port, 3/8' Female NPT (includes ball valve) Air Inlet, 3/4' Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor
Air Exhaust : 3 / 4' Female NPT (includes silencer)
Air Inlet : 3 / 8' Female NPT (includes ball valve)
Air Supply Pressure : 20 to 100 PSI (1.4 to 7 kgf / cm²)
Diaphragm : PTFE
Discharge Volume Per Cycle : 0.163 gallons (615 cc)
Fluid Port : 3 / 4' NPT
Liquid Temperature : 212°F (100°C)
Max Cycles Per Minute : 195
Maximum Flow (GPM) : 31.7 GPM
Max Suction Lift : 18 Feet
Model Number : 851523-FDA
Model Series : FDA Compliant Sanitary Pumps
Motor : Aluminum Air Motor
Sanitary Clamp Size : 1'
Solids (Inches) : 1 / 16' (2.0 mm)
Type : 851523-FDA
|
3569.60 |
|
|
Yamada NDP-25BST 1" 316SS Teflon Pump
NDP-25BST AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-25BST series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 49 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.
Inlet (in)1
Outlet (in)1
Max Flow (gpm)46.2
Max Temp212
Max Solid (in)3/16
Valve Type (in)3/8
Air Motor MaterialAluminum
Body MaterialStainless Steel
Elastomer MaterialPTFE
|
2428.80 |
|
|
Yamada NDP-25BVT-PN 1" Kynar/Tef Pump
NDP-25 AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-25 series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 49 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.
Inlet (in)1
Outlet (in)1
Max Flow (gpm)46.2
Max Temp212
Max Solid (in)3/16
Valve Type (in)3/8
Air Motor MaterialPolypropylene
Body MaterialKynar
Elastomer MaterialPTFE
|
2347.20 |
|
|
Groco Sa-1 Strainer Repair Kit
|
29.84 |
|
|
Little Giant In-Line Pump 531001
Little Giant 1-AA-OM Pump
Motor 115 Volt 60 Hz 1/200 HP Open Fan Cooled Motor, 110 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: 1/2" MNPT and 1/4" FNPT, Outlet: 1/4" MNPT, Nylon Body, Viton Seal, Fluid Temperature Up to 120F (49C), 1 Foot Wire Leads
531001 Non-submersible, open motor pump for in-line use in hot drink dispenser, fountain and fresh water applications. Largely used in water displays. Fan-cooled motor, stainless steel motor shaft, Viton seal, Nitrile volute gasket and aluminum mounting bracket.
|
85.80 |
|
|
Oberdorfer 6663-1 Washer N11Hdm N13Hdm W/
|
234.00 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
Gianneschi CB 22-120 1.1KW Cent Pump 230V 50/60Hz 1Ph
Main pump features:
High performance with limited power needed
Open or close impeller available
Threaded/Flanged connection
Wide range
Applications:
F.W./S.W. Circulation
S.W feeding
WPS - Hydrofore
Port Size: From 1/2'' to 1'' 1/2 BSP - from DN32 to DN65
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
1961.88 |
|
|
BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v
Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.
Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.
Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.
Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.
Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.
Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us
|
1794.60 |
|
|
FINISH THOMPSON 107324-1 ODP MOTOR 1/3HP 115V
S1 FTI EF Series Motor, ODP (Open Drip Proof), Splash-proof, IP24 Motor
|
299.33 |
|
|
Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame
|
1794.96 |
|
|
Scot Pump 48451X-1/2 HP MPU 1/2 HP 1PH
Pump
• Seawater Bronze case, impeller adapter
• Seawater Bronze 7/8” shaft
• Impeller keyed to stub shaft and secured by washer and locking assembly
• O-ring case gasket
Motor
• Standard NEMA frame motor
• 1 and 3 phase
|
1785.00 |
|
|
Scot 48451X-1.5HP Motor and Pump
48451X
Impeller: 4.75"
Ports: 1.5 X 1.5 NPT
1.5 HP
TEFC 2850/3450 RPM
1/50/60HZ
|
2208.30 |
|