|
Kayak Angler Starter Crate Kit
Milk crates provide interior storage areas on the deck of kayaks, canoes, or paddleboards. It is a simple solution to an ever-persistent problem in a sport plagued by a lack of storage space. The YakGear Black Milk Crate comes with the YakGear logo in a standard 13 in. x 13 in. milk crate size, fitting most kayak tank wells or decks. Having milk crates for sale also prevents kayak anglers from being forced to steal beverage distributor crates from stores or shell out major cash on a glorified milk crate storage system.
The crates are honeycomb-designed to allow customization with all YakGear crate rigging accessories, including the Build A Crate Series of accessories. In addition, this kit comes with 2 x Build A Crate single rod holders and 1 x YakGear accessory pouch.
About the Accessory Pouch
The YakGear Accessory Pouch is an easily installed storage pouch that allows storage, protection, and organization for paddling and fishing accessories while on the water. The storage pouch is designed to secure tackle trays, extra lines, pliers, fish grips, and other accessories while keeping them organized at the same time. The 7-inch tall x 12-inch wide gear storage pouch will hold up to a 9-inch x 11-inch tackle box and other accessories up to 11 inches in width or 9 inches in height.
The adjustable top elastic strap combined with the side elastic web strap provides the flexibility necessary to accommodate accessories of varying sizes while maintaining a snug grasp. This gear storage pouch can be mounted anywhere that it is needed, including on a milk crate, the side of a cooler, or on the inside gunwales of the kayak or canoe, for needed extra storage.
The accessory pouch comes complete with stainless steel installation hardware, installation instructions, and rigging tips from YakGear. About the Build a Crate Single Rod Holders: Milk crates, buckets, and coolers provide interior storage areas on the deck of a kayak, canoe, or paddleboard; however, these storage methods do not have any exterior storage or rod holder features.
Rig the exterior of a preferred storage area with the YakGear Build A Crate Kits to fully maximize all storage possibilities. This single rod holder kit provides any paddler with a rod or anchor holder that easily attaches to any storage container with inside access. This allows the paddler to efficiently take advantage of storage space in a sport where extra gear is at a premium and free space is hard to find.
The rod holder is 12 inches long and features trigger cutouts to properly rest and secure reels. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Included:
1 x YakGear Black Milk Crate
1 x YakGear Accessory Pouch
2 x YakGear Build A Crate Single Rod Holders
Features:
1-year warranty
|
34.15 |
|
|
Kayak Fishing Starter Pack
Fishing essentials for outfitting your Kayak. The Kayak Starter Pack includes a 282 Baitcaster Spinning Rod Holder with Gear Head & Track-Holds a bait caster reel securely in the cushioned cradle. 438 Gear Head Track Adapter-slide the Gear Head into any of our 440 series track, twist the gear head clockwise to securely lock. 440-4 4” Low Profile Track-top load design allows for quick and easy setup. 311 Drink Holder-fits cans, coffee mugs and insulated sleeves. 136 Paddle Clip-holds your paddle, net, gaff & boat hook. 455 Baitboard & Accessory Tray-Exterior tray walls lets you cut bait and prep lures. Also included are your Stainless steel fasteners-18 pieces #10 x 5/8.
*Not intended for use with inflatable kayaks.
Includes the following Scotty part numbers:
440-4, 455, 438, 311, 282 and 136
|
87.36 |
|
|
NMEA 2000 Starter Cable Kit
Nearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together.
With Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future.
There are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price.
By utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately.
Features:
Everything you need in one box
Smart 4-Way T-Piece “Backbone”
1M (3') Power Cable with in-line fuse
1M (3') “Drop Cable”
Pair of removable network terminators
Allows three devices to be connected
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors and reduced T-Piece connections, improve reliability
|
100.75 |
|
|
Solar Starter Cable Kit
Xantrex's Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery.
Features:
Designed to connect a PV array to a charge controller and battery
Weather-resistant and certified cables
PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller
Battery cables have built-in fuse and ring terminals
In the Box:
(1) Pair of (black/red) 20-foot MC4-type PV cables
(1) Pair of (black/red) 10-foot MC4-type battery cables
Built-in 30A DC ATC fuse on the red cable
|
115.26 |
|
|
Replacement Outboard Starter Brush Kit
A replacement brush kit that will fit American-made permanent magnet outboard starters.
Replaces:
Mercury 63292
Mercury 75384
Mercury 898265016
Mercury 75384-1
OMC 385952
OMC 433850
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
20.16 |
|
|
Kayak Car-Top Carrier Kit
Part #: 11438-7
A simple, convenient kit for carrying a kayak on car top. Includes two supporting foam blocks that snap on boat's gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' of polypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.00 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
3.3lb Grapnel Anchor Kit with Storage Bag
Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included.
Features:
3.3 lb. galvanized steel Grapnel Anchor
Four folding 6" tines for easy storage
Locks in an open or closed position
A heavy head allows for easier anchoring
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
22.40 |
|
|
Molded Paddle/Pole Clip Kit - 1-1/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 1-1/4 in. clips
|
11.20 |
|
|
1.5lb Grapnel Anchor Kit with Storage Bag
Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.
Features:
1.5 lb. galvanized steel Grapnel Anchor
Four folding 3.5 in. tines for easy storage
Locks in open or closed position
30 ft. nylon diamond braid rope
Storage bag included
1-year warranty
Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions
|
20.00 |
|
|
Ultimate RV Starter Kit
Camco's convenient starter boxed kit is an easy way to outfit an RV with the basic accessories needed to start the season out right. It includes many useful parts and accessories that are sure to come in handy. Plus, it's a smart idea to keep an extra kit on hand for any unexpected needs or repairs while on the go.
Features:
Provides an RV with the basic accessories you need to start the season out right
For use with pop-up campers
Great for the next adventure (ideal for unexpected needs or repairs while on the go)
Kit Includes:
(1) 10-foot standard sewer hose
(1) transparent sewer hose elbow with bayonet fitting
(1) universal 4-in-1 adapter, (1) 15M/30F Power Grip adapter
(1) plastic water pressure regulator
(1) individual roll of TST 2-ply toilet tissue
(3) TST Orange Drop-Ins and (1) 25-foot TastePURE drinking water hose
|
35.21 |
|
|
Take Me Fishing™ Tackle Kit Box - Red/Beige
Features:
Includes starter tackle kit to get kids excited about fishing
Brass-bailed latch for secure closure
Removable tray with 10 fixed compartments
Bulk storage
A portion of the proceeds collected will support the Future Fisherman Fund
Great first tackle box for kids
L=13.5" x W=7" x H=6"
|
19.51 |
|
|
Bolt Kit for Gear Reduction Starters
Bolt kit that will fit 30470 starters. Includes 2 long mounting bolts, 3/8”-16 N.C. threads. This kit will also fit all Delco gear reduction starters with staggered bolt mounting patterns.
*Will NOT FIT metric engines or 10MT starters.
Replaces:
SIERRA 18-5913
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15.59 |
|
|
This is the Major Rebuild Kit that includes the pump shaft.
|
778.02 |
|
|
|
730.02 |
|