Molded Paddle/Pole Clip Kit - 1-1/4" Clips  Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 1-1/4 in. clips

Molded Stick Clip Kit - 3/4" Clips Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 3/4 in. clips

Paddle & Pole Keeper Kit This Paddle & Pole Keeper Kit lets you easily store your pole or paddle and frees up your hands for other activities!  Specifications: Constructed of injection molded nylon and polypropylene. Fasteners included Kit Includes:  18" of 1/4" bungee (2) Bungee terminal ends with sleeve (4) Lashing hooks with one hole (2) 10-32 X 3/4" PH machine screws (6) 10-32 Nyloc nuts (6) #10 flat washers (6), trifold pop rivets (6) Easy installation instructions

Tele-Mount™ Telescoping Camera Pole Kit - 1/4-20 Camera Threaded Adapter Consists of a female hole base with 1" ball, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The female hole base will fit most common telescoping and extension poles. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras. Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera 1/4"-20 male threaded stud will connect to most female threads found on POV cameras High strength materials ensure product longevity Fits most common telescoping and extension poles Great for achieving that perfect underwater fish shot Double ball and socket mount offers infinite adjustment angles Place pole in a kayak milk crate, rod holder or the RAP-119U Lifetime warranty Compatible Poles:</>B Most generic telescoping poles with 0.715" OD Threads Ettore 42004 4-Feet Reach Extension Pole Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are Inches NPT Inlet, Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.   UNSPSC Code: 40150000

Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female   Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports

BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.

BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP Bronze Fitted Cast Iron Construction.   Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches

BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.

BURKS 35G5-1 1/4, Centrifugal Pump 3PH 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.63 Inches.   UNSPSC Code: 40150000  

BURKS 35GA5-1 1/4, CENT PUMP 3PH 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.44 Inches.   UNSPSC Code: 40150000

BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4 Inches.   UNSPSC Code: 40150000

BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.81 Inches.   UNSPSC Code: 40150000