Handle Kit Whether users want to replace the worn-out handles or install a couple of extra carrying points, the YakGear Handle Kit provides the answer. The two handles are constructed from marine-grade rubber with double-thick nylon straps for durability. This set of handles also features a contoured grip for comfortable use and practicality during transportation. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Handles are constructed from marine-grade rubber with double-thick nylon straps for durability Contour grip ensures easy and comfortable use Stainless-steel hardware is included for easy installation 1-year warranty Specifications: Color: Black

Toggle Handle Kit The YakGear Toggle Handles easily attach to a pad eye or deck loop at the bow or stern of your watercraft. Sold as a two-pack Features: Sold as a two-pack Quick and easy replacement for any watercraft 2 toggle handles per pack Black handle with black rope 1-year warranty *HARDWARE NOT INCLUDED

Large Handle Kit - Pair Replacement handle kit with both Left and Right-sided handles. Compatible With: Flush 3G hatch sizes 27, 30, 44, 60, 70, Bavaria big rectangle and Bavaria big square Coastline hatch, sizes 18, 22, 30, 40, 44, 50, 54, 60, 65 and 70 Ocean hatch, sizes 30, 40, 44, 50, 54, 60, 65, 66 (H.Rassy), 70, 75 and 77 Trimline hatch sizes 30, 40, 50, 60 and 70 Rolltop hatch, sizes 30, 40, 50, 60, 65 and 70 In the Box: One (1) Exterior Handle LH Grey Assembly One (1) Exterior Handle RH Grey Assembly Two (2) O-Ring Two (2) Exterior Handle - Grey Two (2) Base Bush - Grey Two (2) Base Bush O-ring Two (2) Handle packing washers One (1) Handle + Lock RH - Grey One (1) Handle + Lock LH - Grey Two (2) No. 10 Screw *Sold as an Individual

Right Handed Portlight Handle kit For right-sided handle operation. Compatible with: Older model Lewmar Portlights *Sold as an Individual

Pull-Up Strap Handle Kit Whether users are looking to fish from a standing position on a sit-on-top kayak or just need a little assistance getting out of the boat, the Pull-Up Strap Handle Kit can be easily installed on any kayak.  Kit Includes:  Webbing with grab loop - 74” X 1” (1) 1” webbing slide (1) Stainless steel eye strap (1) 10-32 X 3/4” OH machine screws (2) 10-32 Nyloc nuts (2) #10 fender washers (2) Features: Constructed of nylon with stainless steel hardware Specifications: Fasteners Included: Yes Weight: 0.75 lbs

Bungee Deck Kit Add or replace the bungee system on the deck of a kayak or canoe with the YakGear Deck Kit. Bungees on the deck of a boat add extra storage for more equipment on your adventure. The kit comes with 10 feet of ¼-inch nylon bungee and is equipped with 6 pad eyes and 2 J hooks for deck mounting. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.  Features: Easily replace the deck bungee or add more storage 10 ft. of 1/4 in. nylon bungee, 6 pad eyes, and 2 J hooks included Installation instructions and hardware are included 1-year warranty

The RAM combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit Hardware: Standard or metric thread stainless steel bolts, provided in the kit. The zinc coated metal u-bolt accommodates rails in diameter from 0.50" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Quick-Grip™ 15W Waterproof Wireless Charging Handlebar Mount The RAM® Quick-Grip™ Wireless is a patented, universal, waterproof wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi wireless phone charging. Both the top and bottom cups feature rubber to help hold a phone firmly in place. To insert your device, use your phone to push the top cup upward, and then gently place your device against the cradle for a secure fit. This Qi-compatible wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. This RAM® Quick-Grip™ Wireless handlebar kit includes a B-size diamond base featuring a 1" rubber ball, a short double socket arm, and a zinc-coated U-bolt base. U-bolt hardware accommodates rails from .5" to 1.25" in diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger.  Features: The waterproof Qi-compatible wireless phone charging cradle features a spring-loaded RAM® Quick-Grip™ design and 15W maximum output Kit includes a wireless charging cradle, B-size diamond ball base, short double socket arm, U-bolt handlebar base, and hardwire charger Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required Specifications: Hardware Included: (1) Safety Tether, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, (4) Large zip ties, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions (inch): Height Range: 5.625" - 6.625", Max Width: 3.125", Max Depth: .7" Clamp Range (inch): .5" - 1.25" diameter Socket-to-Socket Length (inch): 1.75" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs Materials: Marine-grade aluminum, high-strength composite, and stainless steel Weight: 1.87 lb. Power Specifications: Input Power: 5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible: Yes Compatible with QC2.0/QC3.0 power supplies Input Connector: USB Type-A Male Input Cable Length: 20" with optional 1.2M extension cable Operating Temperature: 0°C to +37.7°C Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), and Moisture Resistant Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, and FCC Certification  Warranty: 1 year  Compatible Devices: Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei: Mate 20 Pro and P30 Pro LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ Nokia: 8 Sirocco and 9 PureView Razer: Phone 2 Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+ Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3  Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Hypro 9910-Kit-1990 Relief Valve for D252 This control unit, for mounting on pump model 9910-D252, is capable of handling flow rates up to 6 gpm (22.7 lpm) and pressures up to 290 psi (20 bar). It includes one adjustable relief valve, one pressure/bypass selector, 5/8" HB bypass port and 3/8" HB port.

Cat Pump 32773 O'Ring Kit The CAT Pumps 32773 is a kit of replacement O-rings for the components inside unloaders. These rings are used to swap out worn or leaking unloader O-rings. Made with NBR. Kit contains OEM components. Specifications: OEM Manufacturer: CAT Pumps Item: O-Ring Kit Material: NBR Compatible Unloaders: 7590 Includes: Piston Stem Backup Ring Piston Stem O-Ring Upper Body O-Ring Piston O-Ring Piston Backup Ring Piston Retainer O-Ring Seat O-Ring (95D) Check Valve O-Ring Discharge Fitting O-Ring

This is the Major Rebuild Kit that includes the pump shaft.

Jabsco 7420-1001 Kit Kit  

Sherwood P1710X KIT Kit P1710X KIT  

Sherwood P1726X KIT Kit P1726X KIT  

Sherwood P1727X KIT Kit P1727X KIT