|
Anchor Cleat Kit
The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Installation instructions and hardware are included
1-year warranty
Specifications:
Length: 4 inches
|
5.60 |
|
|
Zig Zag Cleat Kit
This YakGear Zig Zag Cleat Kit comes with a 3-1/2-inch nylon zigzag cleat for kayaks, canoes, and small boats. The zigzag cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Zig-zag cleats require no knots to be tied, as the pressure from the lace-back design keeps all anchors in place using up to 3/8-inch rope.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Lace back design allows all anchors to stay in place using up to 3/8 in. rope
Installation instructions and hardware are included
1-year warranty
Specifications:
Zig Zag Cleat Size: 3-1/2 in.
|
7.20 |
|
|
Paddle Keeper Kit
Add or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe.
As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Paddle keepers can be used to store an assortment of items
Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves
Each kit comes with two paddle keepers
Installation instructions and hardware are included
1-year warranty
|
12.80 |
|
|
Performance Anchor Trolley Kit
Sea-Dog's Performance Anchor Trolley Kit is an essential tool for the Pro Angler. It features a zig cleat for easy, one-handed adjustability. The durable, one-piece cheek blocks operate silently so users won’t scare fish in the water below. When the need arises to wade through the water, easily unclip the custom-designed ring and use the system as a leash.
Kit Includes:
30' of 3/16" polypro deck line (1)
Zig cleat (1)
Ring clip (1)
Cheek blocks (2)
Nylon pad eyes (6)
10-32 X 3/4" PH machine screws (10)
10-32 Nyloc nuts (10)
#10 flat washers (10)
Well nuts (10)
Features:
Proudly constructed in the USA of injection molded nylon, stainless steel, and polyester
Specifications:
Fasteners Included: Yes
Weight: 0.80 lbs
|
19.03 |
|
|
Micro Cam-Matic Aluminum Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.
Specifications:
Weight: 33g / 1.2oz
Maximum working load: 91kg / 200lb
|
35.28 |
|
|
Micro Carbo-Cam Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat.
Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.
Specifications:
Weight: 26g / 0.9oz
Maximum working load: 68kg / 150lb
|
31.84 |
|
|
Deluxe Anchor Trolley with Pulleys
The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat.
The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included.
Features:
Deluxe anchor trolley system with Harken pulleys
It allows the bow of your vessel to turn into the current for a smoother experience
A mini zig-zag cleat is included, assisting in maintaining stable positioning
Installation instructions and hardware are included
The kit also includes 30 ft. of rope
1-year warranty
|
28.00 |
|
|
Molded Stick Clip Kit - 3/4" Clips
Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. the 3/4 in. clip will fit paddles from 5/8 inch to 7/8 inch and is YakGear’s preferred method of securing the YakGear - Yakstick Mud Anchor.
This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Molded rubber paddle clips allow for easy paddle or mud anchor storage
Two solid rubber-molded paddle clips are provided
3/4 in. clips fit paddles and mud anchors ranging from 5/8 to 7/8 in.
Installation instructions and hardware are included
1-year warranty
Specifications:
Size: 3/4 in. clips
|
8.00 |
|
|
Bungee Deck Kit
Add or replace the bungee system on the deck of a kayak or canoe with the YakGear Deck Kit. Bungees on the deck of a boat add extra storage for more equipment on your adventure. The kit comes with 10 feet of ¼-inch nylon bungee and is equipped with 6 pad eyes and 2 J hooks for deck mounting.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Easily replace the deck bungee or add more storage
10 ft. of 1/4 in. nylon bungee, 6 pad eyes, and 2 J hooks included
Installation instructions and hardware are included
1-year warranty
|
15.20 |
|
|
Toggle Handle Kit
The YakGear Toggle Handles easily attach to a pad eye or deck loop at the bow or stern of your watercraft. Sold as a two-pack
Features:
Sold as a two-pack
Quick and easy replacement for any watercraft
2 toggle handles per pack
Black handle with black rope
1-year warranty
*HARDWARE NOT INCLUDED
|
8.00 |
|
|
Drip Ring Kit
Drip rings help stop the water from flowing down the shaft of the paddle into the boat or lap of the paddler while paddling. Stay dry and paddle on with YakGear Drip Rings. Accommodating two-piece paddles with a shaft circumference of 1-1/4 inch to 1-1/2 inch, the drip rings are placed close to the paddle blades on the shaft of the paddle. Drip ring combinations are sold in quantities of two for placement on the port and starboard sides of one paddle. The paddle must be two pieces for proper installation. Paddle not included.
Features:
Sold in quantities of two
Drip rings stop water from flowing down the shaft of the paddle
Fits paddles ranging from 1-1/4 to 1-1/2 in. in circumference
1-year warranty
|
4.00 |
|
|
Aluminum-S-Cleats
These Aluminum-S-Cleat come in sizes to fit all boats.
Pick from 10", 12", 15", or 18" S cleats
Made from 356 Corrosion-Resistant cast Aluminum these S Cleats are built to withstand the harshest marine environments. No matter the conditions you can trust these cleats. There is also a 10 year warranty on them.
|
0.00 |
|
|
Sierra anchor pin kits for Mercruiser engines.
|
1.99 |
|
|
Standard Carbo-Cam® Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.
Specifications:
Weight: 54g / 2 oz.
Maximum working load: 91kg / 200lb.
|
37.06 |
|
|
Standard Cam-Matic® Aluminum Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.
Specifications:
Weight: 85g / 3 oz.
Maximum working load: 136kg / 300lb.
|
44.35 |
|