|
AutoTrim Pro for Electric Trim Tabs
Included diagnostics control unit
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
602.87 |
|
|
AutoTrim Pro for Hydraulic Trim Tabs
Includes:
ATP Display
25' Helm Keypad Wire Extension
ATP Hydraulic Control Box
Pump Extension Cable
Port Sensor Extension Cable
Stbd Sensor Extension Cable
AutoTrim Pro Installation & Users Guide - Hydraulic
AutoTrim Pro Quick Start Card - Hydraulic
Features:
Easy-to-use, space saving keypad combining auto tab control, manual tab control, and tab position indication
Manually or automatically levels the pitch of your boat and corrects any roll due to uneven loads or shifting weight
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
603.53 |
|
|
BOLT 12x4 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
455.10 |
|
|
BOLT 12x9 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
472.40 |
|
|
BOLT 18x9 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
507.11 |
|
|
BOLT 24x9 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
541.80 |
|
|
BOLT 12x12 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
507.11 |
|
|
BOLT 18x12 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
541.80 |
|
|
BOLT 24x12 Electric Trim Tab System - Control Switch Required
Electric Trim Tab Systems For Trailered Boats
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
While we strongly recommend hydraulic trim tabs for most applications, electric trim tab systems are suitable for:
Trailered boats from 17-28 feet
Single actuator use, due to the inability to synchronize two electric actuators on the same tab
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
576.43 |
|
|
BOLT 6x12 Edge Mount Trim Tab System
Boaters can enjoy a durable and reliable electric trim tab system designed for 17-28 foot boats. Bennett Marine invented the electric trim tab in 1960, and now Bennett leads the way with an electric trim tab system designed to outperform and outlast any electric system on the market.
Compared to other electric systems using old technologies designed over twenty years ago, the BOLT Electric combines cutting-edge technology with a robust and water-tight actuator. This new "Superior by Design" technology resolves the issues that older systems have with breaking apart and water intrusion caused by design flaws and marine growth.
Features:
Wires are concealed and protected through the upper hinge - there are no exposed wires to the marine environment
Robust, water-tight black nylon actuator provides trouble-free operation
Main seal located high to protect against marine growth and water intrusion failures
Quieter than any other system on the market - No more scaring the fish away!
Installation is fast - no need to disassemble parts of the actuator
Controls sold separately
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
485.46 |
|
|
BOLT 12x16 Heavy Duty Trim Tab System
Designed for rougher conditions and higher speeds, the BOLT1216HD (12” span x 16 chord”) heavy-duty electric trim tab system features an adjustable upper hinge actuator and requires less than 10.25” of vertical transom height. The high-performance laser-cut, tapered trim tabs are manufactured with extremely durable 12-gauge, electro-polished stainless steel, featuring a full-profile backing plate, and up-fins for added strength.
Control sold separately
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1077.73 |
|
|
9" x 9" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 14' to 18'
Length of Tab: 9"
Width of Tab: 9"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
563.81 |
|
|
9" x 12" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
579.13 |
|
|
9" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 22' to 30'
Length of Tab: 9"
Width of Tab: 18"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
620.03 |
|
|
9" x 24" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 26' to 40'
Length of Tab: 9"
Width of Tab: 24"
Hinge Height: 1"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
718.86 |
|