Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Ampco AC114MD14T-S, Viton Pump End Only, with Max Impeller  

Ampco Fluid End Aluminum Bronze Full Size

Ampco Kc2 1 1/2 X 1 1/4 Niaibz Fluid End  

Ampco Fluid End Aluminum Bronze Full Impeller for KC2 1 X 3/4

Scot Pump 48372X-3/4HP MPU 72 1PH 3/4HP 4 IMP ODP Pump  Seawater Bronze case, impeller, adapter  Seawater Bronze 7/8 inch shaft  Mechanical seal is 7/8 inch diameter  Impeller is keyed to stub shaft and secured by a washer and locking assembly.  O-Ring case gasket   Motor – 2 Pole  Standard NEMA frame motor

Scot Pump 48451X-3/4HP MPU 3/4HP 1PH 56C Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase

Ampco Pumps BI8202990-5 Bronze Impeller for Kc2 1 1/4X1 NAB 5" See Literature to the right, as to Why NAB Impellers

3/4" NPT x 1" ID Bronze Full Flow 90° Elbow Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems

Applications for the TE-5.5K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   The TE-5.5K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals..  The TE-5.5K-MD may have been modified to handle these chemicals.     March Pump's industrial TE-5.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5.5K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 30 GPM 102 LPM Max Head 41 FT 9 M Power .33 HP .248 KW Electrical 1PH 115/230V      3PH 230/460V 50/60HZ     Type Centrifugal Mag Drive Inlet 1"FPT Outlet 3/4"MPT Wet End Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

Ampco Ac216Md14T-S, Viton Pump End Only with Max Impeller

Ampco Pumps 216D-24B-316L Retainer (Impeller)

Ampco BI8202990 Bronze Impeller KC2 1 1/4X1 NAB See Literature to the right about Why NAB Impellers.

Ampco Pumps P1SX015098006 17-4 Sleeve