Pump Self Priming Hand Operated Manual Galley Pump Whale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce. Narrow mounting base allows installation for use between two sinks. Features Ideal where space is limited Angled spout and adjustable height provide various options for installation Extended spout makes for easy filling of containers Capacity 8 ltrs (2.2 US gals) per minute Narrow mounting base allows installation for use between two sinks Delivers a smooth flow on each stroke Useful as a back-up pump or for a simple freshwater supply pump Suitable for fresh water and saltwater WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Primetime 115volt Pump The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds.  A carbon / ceramic / Viton mechanical shaft seal is standard.  Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling, Agricultural pump, and Industrial pump.   SPECIFICATIONS: Flow………………………Up to 21 GPM Head Feet…………….Up to 23’ Housing……………….316 Stainless Steel (Investment Cast) Cover……………………316 Stainless Steel Impeller……………….316 Stainless Steel Semi-Open Wearplate……………316 Stainless Steel Mechanical Seal… Carbon / Ceramic / Viton Bellows O-ring/Flapper…….Viton Weight…………………18 lbs

Primetime Pump 230vac The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for Marine, Industrial, Agricultural or Commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   SPECIFICATIONS: Flow…………………….Up to 21 GPM Head Feet……………Up to 23’ Housing………………316 Stainless Steel (Investment Cast) Cover………………….316 Stainless Steel Impeller……………..316 Stainless Steel Semi-Open Wearplate………….316 Stainless Steel Mechanical Seal..Carbon / Ceramic / Viton Bellows O-ring/Flapper…..Viton Weight……………...16 lbs    

Primetime Pump 12VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications: Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling Agricultural pump Industrial pump   SPECIFICATIONS: Flow: Up to 21 GPM Head Feet: Up to 23’ Housing: 316 Stainless Steel (Investment Cast) Cover: 316 Stainless Steel Impeller: 316 Stainless Steel Semi-Open Wearplate: 316 Stainless Steel Mechanical Seal: Carbon / Ceramic / Viton Bellows O-ring/Flapper: Viton Weight: 13 lbs Motor is painted White

Primetime Pump 24VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White

Burks Pumps Burks Pumps and Pump Parts are sold at CLR Marine. Our products include Burks pump, turbine pumps, centrifugal pumps, self priming pumps, and condensate return pumps.

IC Retail Kit 12V Gulper IC Pump & Strainer IC At the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance. Features & Benefits Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high,dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

IC Retail Kit 24V Gulper IC Pump & Strainer IC At the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance. Features & Benefits: Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically Pre-wired and assembled - just connect power Remote mounted pump for easy inspection- high, dry and protected Soft start - protects the pump for long life Small footprint strainer fits into very confined bilge spaces Low current controlled switching - no switch failure from high currents On/off delay - prevents cycling Environmentally friendly - no mercury Time delay to allow for optimum drainage Override wire included to allow for manual activation Non-choke valves - no filter to block/clean Long life - pump self primes and runs dry without damage WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mate USA M164-007-12 12V GEAR PUMP 4GPM UP3-S Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.   Part n.16400712 Product NameUP3-S Voltage (V)12 Consumption (A)6 Fuse (A)10 Self-priming (m)  1.5 Flow rate (l/min)  15 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)120

March 809 815 Series Mag-Drive Centrifugal Pumps The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports  

Yamada NDP-5FVT 1/4" Pvdf Teflon Pump Yamada NDP-5FVT Kynar Body Air-Operated Diaphragm Pump The Yamada NDP-5FVT Pump is an air-operated double diaphragm pump with PTFE diaphragms and a Kynar housing with incredible weathering characteristics. Part of the NDP-5 Series, this self-priming pump is a versatile unit that can handle a wide variety of fluids with a high solid content. Excellent for applications like car washes, manufacturing, and other industrial environments where high performance and long life are necessary.   Dimensions: 6.14" W _ 5.79" H   Specifications:   Body Material: Kynar (polyvinylidene fluoride) Diaphragm Material: PTFE Intake Ports: 1/4" female NPT Discharge Ports: 1/4" female NPT Air Inlet (includes ball valve): 1/4" female NPT Air Exhaust (internal silencer): 3/8" female NPT Flow Rate: 3.1 GPM maximum Maximum Liquid Temperature: 212° Fahrenheit (100° C) Air Supply Pressure Range: 20 to 100 PSI Discharge Volume Per Cycle: 0.0078 gallons (29 cc) Maximum Cycles Per Minute: 400 cycles Maximum Dry Suction Lift: 5' Pump Air Motor: Ryton air motor standard Weight: 3.7 lbs.

Mate USA M164-008-12 12V GEAR PMP 4GPM UP3-R Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.   Part n.16400812 Product NameUP3-R Voltage (V)12 Consumption (A)6 Fuse (A)10 Self-priming (m)  1.5 Flow rate (l/min)  15 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)120

Mate USA M164-022-13 24V GEAR PMP 3 POSTN REV Professional range of self-priming electric 12V and 24V pumps for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.   Part n.16402213 Product Name  Marco UP3/OIL-R Reversible pump lubricating oil + integr.on/off switch (24 Volt) 12 Voltage (V)24 Consumption (A)3 Fuse (A)4 Self-priming (m)1 Flow rate ⌀ 6 (l/h)20 Flow rate ⌀ 8 (l/h)60 Flow rate ⌀ 13 (l/h)330 Hose (mm)13 Pressure (bar)2 Ports (BSP)3/8″ Motor power (W)90  

Oberdorfer 750B Series Self Priming Base Mount Pump FEATURES Pump Body: Bronze Ports: 1 1/2" NPT Flow: 93 GPM Max Pressure: 37 PSI Max, 82 feet of head Impeller: Centrifugal Shaft Seal: Mechanical Seal Buna Standard, Viton or Teflon Optional Shaft: Uses Motor Shaft. Available with K-Monel Shaft for Marine Applications. Motor / Drive: Pump Heads can be Field Mounted to Standard Nema C Jet Pump Motor with Threaded Shaft.     APPLICATIONS / CHARACTERISTICS BRONZE BASE MOUNTED SELF-PRIMING CENTRIFUGAL PUMP Self-Priming to 20 Ft. Suction Lift. Seal Options Available for Solvents and Mild Chemicals. Base May be Mounted to Motors with Weld-On Feet.     750B is Oberdorfer - Self Priming Base Mount Pump Head Only Bronze 1 1/2"NPT  

Oberdorfer 750B Series Self Priming Base Mount Pump FEATURES Pump Body: Bronze Ports: 1 1/2" NPT Flow: 93 GPM Max Pressure: 37 PSI Max, 82 feet of head Impeller: Centrifugal Shaft Seal: Mechanical Seal Buna Standard, Viton or Teflon Optional Shaft: Uses Motor Shaft. Available with K-Monel Shaft for Marine Applications. Motor / Drive: Pump Heads can be Field Mounted to Standard Nema C Jet Pump Motor with Threaded Shaft. We have many motor options available and can assemble for you.     APPLICATIONS / CHARACTERISTICS BRONZE BASE MOUNTED SELF-PRIMING CENTRIFUGAL PUMP Self-Priming to 20 Ft. Suction Lift. Seal Options Available for Solvents and Mild Chemicals. Base May be Mounted to Motors with Weld-On Feet.     750B-T19 is Oberdorfer - Self Priming Base Mount Pump Bronze 1 1/2"NPT 1 1/2HP 115/230V ODP