Universal Rocket Launcher Part #: 106 From catfishing to trolling for big game, our stout four-rod rocket launcher was built to handle demanding fish. Its universal design allows for just about any mounting location you can think of. The two outer holders shoot away from the center approximately 15° and down approximately 10°. The two inside holders shoot straight back. Comes with black caps on the rod holders.

Dual Rocket Launcher Rod Holder Two fully adjustable Rocket Launcher Rod Holders with over 9" of stainless steel jacketed composite construction, accomodating all rods. The 447 Dual Rocket Launcher Rod Holder gives you the ability to fish with two rods without mounting another rod holder. The 447 comes standard with the No. 2116 HP Propack Downrigger. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Description: 304 S.S. 4-Tube Rocket Launcher. Overall Length: 34" Tube Length: 10" Inside diameter of tube: 1-5/8" Base Diameter: 2-1/2" Fastener - #10 (6) (Not Included)

i4P Linear System w/17.7" Reflector & Universal Quad LNB With its rugged, reliable and durable design, the Intellian i4 provides the most outstanding performance to stay locked in. It connects boaters to the premium satellite TV entertainment they want while vessels are cruising at high speed or in rough sea conditions. The i4's stylish and polished dome design makes it perfect for boats over 50 feet. With its patent pending innovations in Wide Range Search (WRS) and Dynamic Beam Tilting (DBT) technologies, the i4 can achieve the most precise tracking performance and highest signal reception without the need of a fragile or superfluous motion sensor. An embedded GPS system can speed up satellite search and acquisition time. The revolutionary design feature of the i4 is that it has the intelligent built-in HD and TriSat modules in its control unit. This offers boaters High Definition satellite TV broadcasts from leading satellite TV service providers without any extra conversion tools and cable wiring. Using Dish Network or Bell TV in Canada, the standard i4 enables HD channel viewing, with DirecTV SD programing is available. For DirecTV HD consider the Intellian s6HD. Combined with the new built in WiFi enables simple one-touch upgrades using the Aptus App. With the Intellian MIM Switch (M2-TD02) sold separately, boaters can enjoy flipping channels through automatic satellite switching just like a home system. See the installation guide of DISH Network MIM for further details. For easy and flexible installation and operation, the i4 supports standard dual and quad IRD connections with its single cable design between the antenna and the antenna control unit (ACU). This simple and powerful system is manufactured in compliance with the most rigorous quality verification of ISO 9001:2001. Features: Fully Automated System Automatic satellite search and identification function 2-axis step motor for controlling the antenna pedestal High Quality Antenna 45 cm diameter of parabola-type antenna for receiving Ku-Band (10.7 12.75GHz) satellite signal LHCP/RHCP or Horizontal/Vertical polarization Enabling powerful signal gain Superior Dynamic Tracking Dynamic Beam Tilting (DBT) by rotating sub-reflector with high speed BLDC motor Fastest Search Algorithm Wide Range Search (WRS) algorithm Statistical search algorithm DVB (Digital Video Broadcasting) Signal Identification High speed identification employing DVB decoder QPSK demodulator lock for DSS signal Built-in GPS System Embedded GPS, which allows for the system to upload the GPS data automatically into the system New Antenna Control Unit Easy satellite information change and update via WiFi using the Aptus App Easy antenna status check and automatic diagnosis Easy antenna control using Aptus graphical control App Reliable power supply to the antenna and to the MIM module Embedded HD module and TriSat function Industry leading 3-year parts and workmanship guarantee with a 2-year labor warranty for all antenna systems, ensuring peace of mind with your hardware investment All Satellite Systems include the following parts as standard: Antenna & Radome 17.7" (45 cm) Reflector & North Americas LNB ACU (Antenna Control Unit) with WiFi connection for upgrades Built-in HD Module for Ku-Band HD (when available) Built-in GPS and NMEA 0183 GPS interface Built-in Pre-programmed Global satellite library Aptus App, downloadable Installation & Operation Manual Installation Template Quick Installation Guide Cable Kit: 49ft (15 m) x 1EA Antenna-ACU RG6 Coaxial Cables 10ft (3 m) x 1EA ACU-IRD RG6 Coaxial Cables 33ft (10 m) x 1EA DC ACU Power Cable 6ft (1.8 m) x 1EA PC Serial Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

i6P Linear System w/23.6" Reflector & Universal Quad LNB Must Ship Truck Freight The Intellian i6 provides superior tracking performance and efficiency compared to antenna systems in similar size. With its stylish dome, the i6 is ideal for boats over 65 feet. The i6 brings boaters the excitement and variety of satellite TV programs while the vessels are traveling around coastal or blue water regions, the larger reflector size of the Intellian i6 increases the range that the unit will operate. You will never have to compromise on reception or quality. The i6 offers the highest signal strength available along with Intellian patented innovations, Wide Range Search (WRS) and Dynamic Beam Tilting (DBT) technologies. Therefore, the i6 can always offer the most precision tracking capabilities and superior satellite signal reception while the vessel is cruising at high speed or in rough sea conditions. The most innovative design of i6 is the integrated smart HD and TriSat modules in the antenna control unit (ACU) which allows boaters to access their favorite HDTV channels from leading satellite TV service providers freely just like they are used to do at home. Combined with the new built in WiFi enables simple one-touch upgrades using the Aptus App. The i6 brings you trouble-free installation and operation with its single cable design between the antenna and the control unit. With the Intellian MIM Switch(M2-TD02) sold separately, boaters can enjoy changing Dish Network HD channels with automatic satellite switching just like a home system. See the installation guide of DISH Network MIM for further details. Plus, the Intellian i6 has a built-in GPS system to enhance satellite acquisition time and accuracy. For DirecTV users the Intellian i6 offers the full range of SD channels, upgrade to the Intellian s6HD for HD programing from DirecTV. Features: Fully Automated System Automatic satellite search and identification function 2-axis step motor for controlling the antenna pedestal High Quality Antenna 23.6 inch (60 cm) Reflector antenna for receiving Ku-Band (10.7 12.75GHz) satellite signal LHCP/RHCP or Horizontal/Vertical polarization Enabling powerful signal gain Superior Dynamic Tracking Dynamic Beam Tilting (DBT) by rotating sub-reflector with high speed BLDC motor Fastest Search Algorithm Wide Range Search (WRS) algorithm Statistical search algorithm DVB (Digital Video Broadcasting) Signal Identification High speed identification employing DVB decoder QPSK demodulator lock for DSS signal Built-in GPS System Embedded GPS, which allows for the system to upload the GPS data automatically into the system New Antenna Control Unit Easy satellite information change and update via WiFi using the Aptus App Easy antenna status check and automatic diagnosis Easy antenna control using Aptus graphical control App Reliable power supply to the antenna and to the MIM module Embedded HD module and TriSat function Industry leading 3-year parts and workmanship guarantee with a 2-year labor warranty for all antenna systems, ensuring peace of mind with your hardware investment All Satellite Systems include the following parts as standard: Antenna & Radome 23.6" (60 cm) Reflector & Linear LNB ACU (Antenna Control Unit) with WiFi connection for upgrades Built-in HD Module for Ku-Band HD (when available) Built-in GPS and NMEA 0183 GPS interface Built-in Pre-programmed Global satellite library Aptus App, downloadable Installation & Operation Manual Installation Template Quick Installation Guide Cable Kit: 49ft (15 m) x 1EA Antenna-ACU RG6 Coaxial Cables 10ft (3 m) x 1EA ACU-IRD RG6 Coaxial Cables 33ft (10 m) x 1EA DC ACU Power Cable 6ft (1.8 m) x 1EA PC Serial Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

High Performance Electric Downrigger The High Performance Downrigger features a new illuminated digital line counter as well as the sleek new Rocket Launcher rod holder. Pre-spooled with the HP stainless steel downrigger wire, the HP models have unbeatle pulling power lifting 20 lb. weights with ease at 260 ft. / min, and 10 lb. weights at 312 ft. / min. Includes: 36" - 60" telescoping stainless steel boom. 1 1/4" dia. Illuminated, resettable, sealed and silent digital line counter 300 ft. of 180 lb. Test, 316 stainless steel downrigger wire 1/2" Kevlar drive belt by Optibelt TM - The same belts used by superior European auto manufacturers Clutch brake with the largest braking surface in the industry Boom mounted adjustable Rocket Launcher Rod Holder Swivel Pedestal Mount WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

109 Backing Plate with Gasket - Anodized Aluminum Use with the Smooth Slide Rocket Launcher.

2116 HP Electric Downrigger (36"-60") The number one choice in trolling performance for the charter captain. Equipped with heavy duty, adjustable dual rod holders and all the other great features of our heavy duty, High Performance Downriggers. PRODUCT OVERVIEW:  Unbeatable pulling power lifts 15 lb. weights at 295 ft./min. and 20 lb. weights with ease at 260 ft./min. Includes Illuminated, resettable, sealed and silent digital line counter 300 ft. of 180 lb. Test, HP Stainless Steel Downrigger Cable Dual adjustable and stainless steel jacketed Rocket Launcher Rod Holder (No. 447) Includes Scotty/Marinco™ Plug and Receptacle Includes 1148 Weight Storage Hook and marine grade stainless steel boom Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release 1/2″ Kevlar drive belt by Optibelt™ – The same belts used by superior European auto manufacturers Clutch brake with the largest braking surface in the industry Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″ – 60″ telescoping stainless steel boom Downrigger Boom Diameter: 1 1/4″ Rod Holder Interior Diameter: 1.70″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers. USA Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

3′ Flag Pole with Dive Flag for Rod Holders/ Rocket Launchers. Dive Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

6′ Flag Pole with USA Flag for Rod Holders/ Rocket Launchers. USA Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

6′ Flag Pole with Dive Flag for Rod Holders/ Rocket Launchers. Dive Flag included, along with pole. The 3′ Flag Pole is perfect for your 12″x18″ OR 20″x24″ Flags. The 6’ Pole will hold 3’x5’ and larger. These flag poles were designed and built in South Florida and are made to withstand the harsh marine environment. The pole is constructed of 1/2″ fiberglass rod material which is remarkably flexible, non conductive, and extremely durable. The rod end is affixed with a gimbal mount designed to slide right into your rod holders and/or rocket launchers. Attaching your flag is easy with the included pennant mounts and stainless clips.

WAHOO INDUSTRIES Wahoo Industries, LLC. designs, developes and manufactures in house a full line of marine accessories such as rod holders, rod riggers, outriggers, rocket launchers and wreck anchors. It is the goal to produce quality products through precision in craftsmanship and distinct value. In addition, Wahoo Industries will support the customers and their deadlines with personal service and hard work to the best of our abilities not only standard stocked items but also diverse and custom items.

Universal Truck Rod Rack Features: Adjusts from 53.5"-67.5" Adjustable angle 6 Rod Holders Drill bit and SS Hardware included

Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Features: Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875" Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.95 lbs.