|
7-Function Submersible Over 80" Taillight - Right/Curbside
Warranty: Limited 1 Year
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.47 |
|
|
LED Left/Roadside Submersible Taillight - Over 80" - Stop/Turn
The Wesbar LED submersible, waterproof square trailer tail light, allows for a brighter light with a longer life. The amperage draw is also lower than incandescent. It includes a built-in side marker reflector that meets D.O.T. The light mounts easily by just drilling two holes on 2-inch centers and using the provided stainless steel mount nuts. This product is ideal for trailers over 80 inches wide that need a license plate light. Rest assured Wesbar lighting products comply with Department of Transportation lighting requirements.
Features:
Ideal for boat and personal water craft trailers
Tail light is waterproof and suitable for the marine environment
Stainless steel hardware
Built in side marker light and reflector
Tail light is waterproof and suitable for the marine environment
|
40.08 |
|
|
Dragonfly 7 PRO Slip-Over Sun Cover
Protective sun cover for Dragonfly 7 Units
Slips over unit and fits like a glove
|
20.44 |
|
|
B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin
The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze transducer housing
Boat Size: 8M (25') and up
Specifications:
Weight: Bronze - 0.9 kg (2.0 lb)
Hull Deadrise: Up to 8°
Acoustic Window: Urethane
Hole Diameter: 51mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
TM258 1kW Transom Mount Transducer w/Humminbird #9 Plug - 7-Pin
The re-designed TM258 sports a new look and better high-speed performance. The industry's first, 1kW, transom-mount transducer has an updated, rugged, mounting bracket. The sleek design makes the TM258 easier to install. And its streamlined shape will give you improved high-speed performance up to 30 knots (35 MPH).
The TM258 will make 600W sounders respond like a more-powerful model. Get 16-times the sensitivity compared with a standard transom-mounted transducer. The TM258 packs four, 50 kHz/200 kHz elements to focus narrow beams at both frequencies, so you'll see crisp targets and clear bottom definition.
Features:
Depth & fast-response water-temperature sensor
Elliptical beam covers larger bottom area
Fits existing TM256 and TM258 models
Bracket kick-up assembly locks in the "up" position and will not damage the transom
Accommodates transom angles between 3° and 21°
Urethane transducer housing
Boat Size: Up to 12M (40')
Specifications:
Weight: 3.6kg (7.9lb)
Hull Deadrise: Up to 25°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
952.16 |
|
|
SVS-460CE Chartplotter - 4.3" Color Screen w/Internal & External GPS Antennas & Navionics+ Flexible Coverage
The SVS-460CE proves that you don't need a big boat - or a big bankroll to benefit from SI-TEX's rugged construction and professional-grade performance.This compact chartplotter deliver the goods for any vessel, from center console skiffs to sailboats to light commercial boats. The SVS-460 chart plotter features a 4.3" high-resolution color LCD and compact case. Rugged construction, versatile, no-nonsense performance and features that really matter.
Features:
52-channel GPS w/standard internal & external antennas
"Dual fuel" charting with C-MAP and Navionics cartography
Unit pre-loaded w/Navionics Gold North American Chart Card
Global GPS compatibility (U.S., European Galileo, Russian Glonass and Asian QZSS)
Brilliant LED backlighting for daylight readability
Easy, intuitive operation and control
|
575.99 |
|
|
TM260 1kW Transom Mount Transducer w/Humminbird #9 Plug - 7-Pin
Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel's transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today's fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260's rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH).
Features:
Top-of-the-line narrow-beam transom-mount
Designed for bottom fishing
Wide 19° beam at 50 kHz
Narrow 6° beam at 200 kHz
Interfaces to any 600W or 1 kW sounder
Depth and fast-response water-temperature sensor
Kick-up assembly locks in the "up" position and will not damage the transom
Accommodates transom angles between 3° and 21°
Urethane housing
Boat Size: Up to 12M (40')
Specifications:
Weight: 4 kg (8.9 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1185.34 |
|
|
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12º
The bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5mm (3/16") extending outside of the hull.
Features:
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Arrow on cap points toward keel when installed
Built-in temperature sensor
Boat Size: Up to 8M (25')
Bronze transducer housing
Specifications:
Weight: 1.4 kg (3 lb)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º
The bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Arrow on cap points toward keel when installed
Built-in temperature sensor
Boat Size: Up to 8 m (25')
Bronze transducer housing
Specifications:
Weight: 1.4 kg (3 lb)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
P79 In-Hull Transducer w/Humminbird #9 Plug - 7-Pin
Our P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.
Features:
Adjusts to hull deadrise angles from 2° to 22°
No holes to drill
Depth only
Recommended for solid fiberglass hulls
Adheres to aluminum hulls under 3.8 mm (0.16") thick
Recommended for planing-hull power boats, trailered boats, rigid inflatable boats (RIBS), and racing sailboats
No hull protrusions
Boat Size: Up to 8M (25')
Specifications:
Weight: 2.3kg (5lb)
Hull Deadrise: 0° to 22°
Acoustic Window: Layered plastic urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
168.41 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
|
84.79 |
|
|
XS-77SPW 7.7" Sports Grill Cover - White for XS Series Speakers
Cover specifically for Fusion's Sports White grilles for the XS Series 7.7" Sports speakers.
Features:
7.7"
Color: White
Sold as a Pair
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.48 |
|