 |
Description: 316 S.S. 4-1/2" E-Z Push-Up Cleat
Overall length - 5-1/8"
Overall width - 1-1/8"
Depth - 3-5/16"
Cleat length - 4-1/2"
Stud length - 1-1/2"
Barb Size - 3/4"
Max Rope Diameter - 1"
|
68.87 |
|
 |
Description: 316 S.S. 6" E-Z Push-Up Cleat.
Overall length-6-1/2"
Overall width - 1-1/2"
Depth - 3-9/16"
Cleat length - 6"
Stud length - 1-7/8"
Barb size - 3/4"
Max Rope Diameter - 1-1/4"
|
90.01 |
|
 |
Description: 316 S.S. 8" E-Z Push-Up Cleat.
Overall length-8-3/4"
Overall width-1-5/6"
Depth-4-9/16"
Cleat length-8"
Stud length-2-5/8" Barb Size-1"
Max Rope Dia.-1-1/2"
|
168.95 |
|
 |
Stainless Steel Cleat - 4.75"
4.75" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 3/8" (10mm), Length 4.75" (120mm), Height .9" (23mm), Fastener size #10 FH, Fastener center/center 1.25" (32mm), Weight 4.1oz (.12kg)
|
46.00 |
|
 |
Folding Cleat - Stainless Steel Studded - 4-1/2"
Overall Length: 4-9/16"
Cleat Length: 4-1/2"
Depth: 1-5/8"
Overall Width: 1-3/8"
|
33.42 |
|
 |
Description: 316 S.S. Heavy Duty Hollow Base Cleat
Length - 12" (30cm)
Height - 2-3/4"
Fastener - 5/16" (4)
Weight - 64.0 oz.
Material: 316 Stainless Steel
|
166.43 |
|
 |
Description: 316 S.S. No saw needed to install cleats. Drill & Drop into place. No special socket lengths needed to affix nuts when installing locking nuts.
Overall length - 5-1/8"
Overall width - 1-5/8"
Depth - 2"
Cleat length - 4-1/2"
Stud length - 1-7/16"
Barb size - 5/8"
Max rope dia. - 5/8"
|
47.09 |
|
 |
Description: 316 S.S. Heavy Duty Hollow Base Cleats
Length - 8" (20cm)
Height - 2-1/4"
Fastener - 1/4" (4)
Weight - 23.5 oz.
Material: 316 Stainless Steel
|
61.06 |
|
 |
Description: 316 S.S. Heavy Duty Hollow Base Cleats
Length - 10" (25cm)
Height - 2-3/8"
Fastener - 5/16" (4)
Weight - 40.0 oz.
Material: 316 Stainless Steel
|
79.73 |
|
 |
Stainless Steel Cleat - 8"
8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1.3 lb (.59kg)
|
117.97 |
|
 |
Stainless Steel Cleat - 3"
3" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/4" (6mm), Length 3" (76mm), Height .6" (15mm), Fastener size #8 FH, Fastener center/center .78" (20mm), Weight 1.3oz (.04kg)
|
43.24 |
|
 |
Stainless Steel Cleat - 6"
6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2" (30mm), Fastener size 1/4" FH, Fastener center/center 1.5" (38mm), Weight 9.0oz (.26kg)
|
67.04 |
|
 |
SPT2010 Base Wedge for Stainless Steel PowerTower® - 4°
Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Compatible with:
Stainless Steel Aft leaning PowerTower®
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A tough, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine grade Polymer
Dimensions (L x W) - 8.07" x 8.07"
Degree of angle - 4°
In the Box:
Wedge
Wedge base
Instruction manual
*Sold as an Individual
|
104.63 |
|
 |
Deck Foot Switch - Windlass Up - Stainless Steel
Lewmar Deck Foot Switches are single-direction switches and come ready to install. With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box.
Technical Specifications:
Switch Direction - Up
Material - Stainless Steel
Power - 12/24V
Color - Stainless Steel
*Sold as an Individual
|
103.04 |
|
 |
Deep-Pipe Level Sender - 350mm - Stainless Steel - 90-4 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
TE Superseal Connector IP67
Compensation chamber
Flange: PA66 GF30
Wiring harness with length of 200 mm
3 Signal ranges: 90–4 OHM, 0– 180 OHM, 240–33 OHM
Lengh: 150 mm–1200 mm
Mounting diameter: 54 mm
IP67 protection rating
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
41.62 |
|
