LED Clearance/Side Marker Light - 58 Series - Red with Pigtail LED oblong clearance/side marker light with snap lock base mount. 4" x 2" x 1". Includes pigtail. WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 LED Surface Mount Step Light - Red with Black Case Features: Operates 9-16 Volt DC Systems 24 Volt Version Available Rated @ 100,000 Hours of Service Life Shock and Vibration Proof Cool to the Touch Energy Draw 26 Milliamps No Corrosion Potted to Seal Out Moisture 3 LEDs 1.69" x .65" x .40" 

3 LED Surface Mount Step Light - Red with White Case Features: Operates 9-16 Volt DC Systems 24 Volt Version Available Rated @ 100,000 Hours of Service Life Shock and Vibration Proof Cool to the Touch Energy Draw 26 Milliamps No Corrosion Potted to Seal Out Moisture 3 LEDs 1.69" x .65" x .40" 

LED Utility Courtesy Strip Light Attwood's 4" LED Utility Courtesy Light is perfect for interior applications. Surface mount is designed to be installed above the water line. Six bright white LED's. Low amp draw, 12 VDC. Water resistant design. Uses a pigtail wire connector. Mounting hardware included. White LED Waterproof Surface mount Pigtail wire connector

40" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0 Anyone who knows trucks knows lighting, and how valuable it is to be able to see whats flying at them. Plenty of companies offer LED single-row light bars, but when users are deep in the woods, far out of town, and miles away from anything resembling help, are they willing to take that risk? With this 40-inch light bar, equip 5W high-quality LEDs with a combo light spread! This Jeep LED bar boasts an IP69K rating (the highest attainable rating). The single-row light bar gives users 40 inches of solid security, powder coated in reassurance that they aren't driving home in the dark. With the highest grade standard on the market, don't settle for just strong; demand Black Oak Strong! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Activities & Uses:  Off-roading UTV roof mount Industrial flood light Roof rack lighting Behind the grill light Technical Specifications: Total Wattage: 200W Amp. Draw: 14.6 LED Quantity: 40 Weight: 11.4 lbs. Raw Lumens: 26,400 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 43" x 2.6" In the Box: 40” light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

  Hydro Glow Fishing Lights manufactures high quality, energy efficient, waterproof lights for both above the water and underwater applications.  Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability.   S1 Ultra Thin Solar Deck Light Proven Hurricane Tough Body Material: High Impact Polycarbonate Power Supply: USA made High Efficient Solar Panel Battery: Lithium Ion 3.7v/340mah LEDs: 6 USA made LEDs Colors: White, Green, Blue & Red Visual Distance: 500M Working Temperature: -20C (-4F) Life Expectancy: 5 Years Waterproof: IP68 Totally Submersible Size: 4.5" x 3.5" x .4"   SF100G/SF100B - Green & Blue SeaFloor Underwater Lights  The SeaFloor Series of underwater lights are our  "anchored to the bottom" style lights.  This means the light fixture floats so a weight is required to hold the light in the desired location and depth.  The SF100G comes with a 50 foot cord, a 120v to 24v power supply to provide safe current to the light and an array of high output, green LEDs for maximum output and energy efficiency.  The SF100G underwater light is designed to be deployed so the light fixture is floating about 3 feet below the surface.  Because there are no special transformers, ballasts and other parts, there is no need for an electrician.  Simply attach a small weight (about 2 pounds) on the cord, drop it in the water and plug it up.    Installation takes about 5 minutes.  As with all our dock lights, we recommend turning off any other white lights on the dock.  You will be amazed at the amount of fish you will see with the SF100G. Safe low voltage current, very bright and energy efficient best describes theh SF100G, a truely green product.      HG3216G - 4' Long 12VDC Green LED Fishing Light  The HG3216G underwater fishing light is made of deep water fishing.  It is 48 inches long and designed to be deployed right off the side of the boat.  When it submerges to the desired depth simply tie or clamp the cord to a rail or cleat.  The HG3216G features 648, high-output, green LEDs, 20' cord, two amp draw, 4,000 lumen and is virtually unbreakable.  The HG3216G underwater fishing light is perfect for deep ocean and deep lake fishing.  It is commonly used for catching swordfish, tuna, squid, snapper, grouper and many species of bait.  It is also a favorite for deep water freshwater fishing for striped bass, walleye, crappie and lake trout.   HG45 Premium Deep Water Fishing Light  HG45 is very compact, only 5" high and 3" in diamenter.  It is easily stowed in a glove compartment.  The design is for illumination on 4 sides horizontal as well as vertical.  The HG45 is perfect for those overnight offshore trips as well as deep water inshore fishing.  It comes with a 20' cord and alligator clips.  If deepwater fishing is your thing then the HG45.       Specials    Closeouts   Remanufactured    Rebates  

LED Left/Roadside Submersible Taillight - Over 80" - Stop/Turn The Wesbar LED submersible, waterproof square trailer tail light, allows for a brighter light with a longer life. The amperage draw is also lower than incandescent. It includes a built-in side marker reflector that meets D.O.T. The light mounts easily by just drilling two holes on 2-inch centers and using the provided stainless steel mount nuts. This product is ideal for trailers over 80 inches wide that need a license plate light. Rest assured Wesbar lighting products comply with Department of Transportation lighting requirements. Features: Ideal for boat and personal water craft trailers Tail light is waterproof and suitable for the marine environment Stainless steel hardware Built in side marker light and reflector Tail light is waterproof and suitable for the marine environment

LED Indicator Integrated Tactile Switch Kit with Pigtail for Single Actuator Systems Complete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Self-Check feature Replacement parts are available and are sold separately.  Specifications 3 Year Warranty System Type: Single Actuator Compliance: CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

LED Indicator Integrated Tactile Switch Kit with Pigtail for Dual Actuator Systems Complete your Lenco trim tab system with the latest, maintenance-free (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. LED indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions. Features Include Simple, quick, Plug & Play installation Instant response Built-in retractor Low profile design Self-contained key pad with waterproof Plug & Play Deutsch connectors Wiring harness length 30" (76.2 cm) from the back of the switch bezel 36" power pigtail 2 1/16" hole cut-out size, overall key pad size of 2.75" x 2.75" 4.08" clearance required from the back of the key pad's mounting location 2 high-intensity LED Indicator displays show the exact position of your trim tabs at all times Photo Eye for optimum viewing in all light conditions Backlit key pad for optimum viewing at night Replacement parts are available and are sold separately.  Specifications 3 Year Warranty System Type:Dual Actuator Compliance:CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Portable Navilight 2NM - TriColor w/Bendable Suction Cup Mount The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system. The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5°. The white Sternlight shows an unbroken light over an arc of the horizon of 135°. All lights work independently, in a combination of all three or red/green together. Examples of usage: *Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs On a power-driven vessel of 12M or more in length but less than 50M in length: As green or red sidelight As sternlight On a power-driven vessel of less than 12M in length: as green or red sidelight as combined green / red as sternlight On a sailing vessel underway: as green or red sidelight as sternlight On a sailing vessel of less than 20 meters in lengths as backup light: Tricolor lantern at or near the top of the mast Specifications: USCG Approval, 2 Nautical Miles 5 Modes: Tricolor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight Floatable, waterproof (20M) and air-tight Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing Powered by three AAA batteries (not included) Size: H = 35mm, Diameter = 68mm Weight (net): 118g Modes / approximate burn time: 16 green / red / white LED, 360° TriColor lantern / 12hrs 10 green / red LED, 225° Bi-Color sidelight / 20hrs 5 green or 5 red LED, 112,5° sidelight / 38hrs 6 white LED, 135° Sternlight / 32hrs Bendable Suction Mount Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Examples of Usage: Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at: The outboard engine The steering console, the windshield or any place on the hull where the lights are seen best On canoes and kayaks with a smooth and flat surface Specifications: Secure suction cup base Quick release suction cap Bendable shaft moves through 180° Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces Size: L = 68mm, H = 157mm Weight (net): 80g WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cool Red Single Color Underwater Light - 16 LEDs - Bronze The SCR-16 is a 16 LED round light. Presenting exceptional brightness in a flood pattern, the SCR-16 is built into durable bronze housing, complete with a scratch-resistant glass lens. The Shadow-Caster SCR is a beautiful compliment to any vessel.  High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there’s no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires no alteration to the main hull Wide Input Voltage Range Shadow-Caster’s underwater LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Features: 60 Watts (5 amps @ 12 volts) 4 “ Outside Diameter Bronze Housing Scratch-Resistant Glass Lens Surge and Reverse Polarity Protection Thermal Throttling ( C ) Above Water Protection Includes 10’ Submersible Cord & Install Diagram 10-40 Volts input 2- Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCM-10 LED Underwater Light w/20' Cable - 316 SS Housing - Cool Red With ten high-intensity LEDs, the SCM-10 underwater light is our most popular model. The SCM-10 is the perfect addition to every vessel and dock. The SCM-10 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 10" Length x 2.375" Width x 0.5" Height (254 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 3.5 Amps @ 12 Volts Internal high efficiency digital switching power supply 42 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCM-6 LED Underwater Light w/20' Cable - 316 SS Housing - Cool Red With six LEDs, our mid-sized underwater light is the perfect addition to every vessel. Available in any of our five colors, the SCM-6 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 7.2" Length x 2.375" Width x 0.5" Height (183 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 2.1 Amps @ 12 Volts Internal high efficiency digital switching power supply 24 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SCM-4 LED Underwater Light w/20' Cable - 316 SS Housing - Cool Red With four LEDs, this compact underwater light is the perfect addition to every vessel. Available in any of our five colors, the SCM-4 works with our Wireless Controller and Power Distribution Box for ease of use and installation. High Intensity Shadow-Caster underwater LED lights are designed to deliver the most intense optical output. Our unique design allows us to produce maximum light output and maximum LED life (over 40,000 hours). Robust Design With Shadow-Caster underwater LED lights, there's no additional external components to install. Just connect the cable (submersible to 20 feet). All the necessary electronics are integrated into the housing and resistant to vibration and the elements. Surface Mounted Our lighting solutions feature a low profile design that requires noalteration to the main hull Wide Input Voltage Range Shadow-Caster's underwated LED lights have an input range of 10 to 30 volts and work equally well on sets of 12 or 24 volts. Surge and Reverse Polarity Protection Our lighting systems have an innovative protection system that automatically disconnects the input entry when excessive voltage or reverse polarity is detected. Thermal Protection Our unique thermal protection features a control system that detects internal temperature and adjusts energy production down to avoid damage. Specifications: Size: 5.8" Length x 2.375" Width x 0.5" Height (147 x 60 x 13mm) Operating Voltage: 10 - 30 Volts DC with consistent brightness Current Draw: 1.4 Amps @ 12 Volts Internal high efficiency digital switching power supply 17 Watts of high efficiency LED light 40,000-Hour Lamp Life 120° light spread angle 316 Stainless Steel Housing with Polycarbonate Lens 20' (6M) Standard Cable Length 1-Year Warranty Made in the USA WARNING: This product can expose you to chemicals including Urethane which is known to the State of California to cause cancer or other reproductive harm, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SM-3 SOLAS Lifebuoy Marker Light  The SM-3 is a high intensity LED strobe which provides 360° visibility for approximately 2 miles.  This compact yet durable marker light facilitates rescue by automatically activating and beginning to strobe when in the water, working for over 40 hours at 30°C (86°F) or over 24 hours at -1°C (30°F).  Perfect for commercial marine, petro-marine, cruisers, and any other application needing a reliable Crew Overboard Marker (COB) light, the SM-3 floats upright in all conditions, ensuring it will keep shining when you need it the most. With a minimum light intensity of 3 candelas throughout its entire operating life, this high intensity LED strobe clearly marks a crew-overboard site with each brilliant flash.  It automatically rights itself and activates when in the water, ensuring that activation is never an issue that a crew member in distress needs to worry about.  The SM-3 operates on 2 AA Lithium batteries and the batteries are user replaceable, allowing the potential for a longer product life than the many disposable lifebuoy lights on the market.  The supplied mounting bracket holds the SM-3 secure in the roughest of conditions but it is still readily accessible when needed in an emergency.  The SM-3 is USCG/MED/SOLAS approved for use around the world and this durable LED marker light therefore provides an excellent option for vessels needing to meet USCG and SOLAS carriage requirements for lifebuoy self igniting lights.  With its easily replaceable Lithium AA battery power source, the SM-3 will give years of service and be ready when called upon. Features: User replaceable AA Lithium batteries  Built-in buoyancy LED strobe light Weatherproof construction 360° Visibility Small, rugged and lightweight design Certifications: U.S.C.G. SOLAS  MED  Technical Specifications: Dimensions (L x Dia.) - 9.9" x 2.2" (25.3 x 5.6 cm) Weight (without bracket) - .71 lb (330g) Battery - AA Lithium x two (2) Activation - Automatic Light Intensity - 3 Candelas per flash  Light Range - 2 miles Light Source  - LED Visibility - 360° Buoyant - Yes In the Box: SM-3 SOLAS Marker Light Mounting bracket Instruction manual  *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.