Padded Grill and Accessory Carrying/Storage Case for 9" x 12" Grills  Conveniently store and transport your grill and accessories in Magma's luggage quality Padded Storage and Carrying Case that is designed to store all of your grilling gear in one space saving location. This case is outfitted with a large storage compartment, to fit Magma and most rectangular grills with a 9”x12” grilling surface, and a separate internal pocket for storing a serving shelf and/or grilling utensils.  The external storage compartment is large enough for carrying up to (3) 1lb. propane canisters and includes an internal mesh pocket for storing the grill’s control valve/regulator, LED grill light, and other small accessories.  Constructed from heavy duty polyester nylon, this case has thick internal padding for maximum protection, reinforced stitching, heavy duty zippers, convenient carrying handles, and shoulder strap.  With the same quality and craftsmanship you've come to expect, this is a must have addition for every grilling enthusiast.  Once again Magma has just what you've been looking for.  Compatible With: Magma Rectangular Grills with a 9” x 12” Grilling Surface Features: 100% Heavy Duty Polyester Nylon Construction with Thick Padding for Maximum Protection Heavy Duty Carrying Handles and Shoulder Strap Reinforced Stitching and Heavy Duty Zipper Large Main Compartment for Grill Main Compartments Internal Pocket Stores Serving Shelf and/or Grilling Utensils Large External Compartment Stores up to (3) Disposable 1-lb. Fuel Canisters External Compartment Includes Internal Mesh Pocket for Storing Control/Valve Regulator, LED Grill Light, and Other Small Accessories *Sold as an Individual 

Padded Grill and Accessory Carrying/Storage Case for 9" x 18" Grills  Conveniently store and transport your grill and accessories in one of Magma's luggage quality Padded Carrying/Storage Cases.   This case is outfitted with a large storage compartment for a grill, with a separate side pocket for storing a serving shelf, griddle, fish/veggie tray, and/or grilling utensils.  Includes removable internal section in the main compartment for carrying up to (2) 1lb. propane canisters and upper mesh pocket for up to (2) control valve/regulators.  Additional features like thick padding for maximum protection and heavy duty carrying handles and strap make this a must have for every grilling enthusiast.  With the same quality and craftsmanship you've come to expect, once again Magma has just what you've been looking for. *Sold as an Individual

Padded Grill and Accessory Carrying/Storage Case for 12" x 24" Grills  Conveniently store and transport your grill and accessories in one of Magma's luggage quality Padded Carrying/Storage Cases.   This case is outfitted with a large storage compartment for a grill, with a separate side pocket for storing a serving shelf, griddle, fish/veggie tray, and/or grilling utensils.  Includes removable internal section in the main compartment for carrying up to (3) 1lb. propane canisters and upper mesh pocket for up to (2) control valve/regulators.  Additional features like thick padding for maximum protection and heavy duty carrying handles and strap make this a must have for every grilling enthusiast.  With the same quality and craftsmanship you've come to expect, once again Magma has just what you've been looking for. *Sold as an Individual

Padded Grill and Accessory Carrying/Storage Case for 12" x 18" Grills  Conveniently store and transport your grill and accessories in one of Magma's luggage quality Padded Carrying/Storage Cases.   This case is outfitted with a large storage compartment for a grill, with a separate side pocket for storing a serving shelf, griddle, fish/veggie tray, and/or grilling utensils.  Includes removable internal section in the main compartment for carrying up to (3) 1lb. propane canisters and upper mesh pocket for up to (2) control valve/regulators.  Additional features like thick padding for maximum protection and heavy duty carrying handles and strap make this a must have for every grilling enthusiast.  With the same quality and craftsmanship you've come to expect, once again Magma has just what you've been looking for. *Sold as an Individual

Padded Grill and Accessory Carrying/Storage Case for Marine Kettle® Grilles Conveniently store and transport your Marine Kettle Grill and accessories in Magma's luggage quality padded carrying/storage case.  Designed to conveniently organize, transport, store and protect all of your grilling gear.  This case is outfitted with a large main storage compartment for a grill with additional pockets for storing a griddle, fish & veggie grill tray, grill tools, control valve/regulators and up to (4) disposable 1 lb. propane fuel canisters.  Additional features like a heavy duty shoulder strap and handles allow for easy use.  While the thick padding provides maximum protection of both the grill and boat during transportation and storage, making this convenient case a must have for every grilling enthusiast. Compatible With: Marine Kettle Grills Technical Specifications: Material - Padded Polyester Fabric  Dimensions (L x W x H) - 16-1/2" x 12-1/4" x 18-3/8" (419.1 x 311.2 x 460.4 cm) Weight - 5.47 lb (2.49 kg) *Sold as an Individual

Serving Shelf with Removable Cutting Board for 9" x 12" Grills  Enhance your grilling experience while increasing your work area with a detachable serving shelf.  This 18-8 mirror polished marine grade Stainless Steel serving shelf includes a removable cutting board.  The board is manufactured using a high density polyethylene material which is FDA approved, UV stabilized and will not crack, mold, mildew, or retain any unwanted odors.  Cutting board is also replaceable.  The shelf installs instantly making clean up and storage a breeze.  Conveniently stores inside of your grill when not in use.  Compatible With: Rectangular Grills w/ 9" x 12" Grilling Surface or Larger Technical Specifications: Material - Mirror Polished 18-8 Stainless Steel  Dimensions (L x W x H) - 12-1/4" x 8-3/16" x 1-7/16" (31.2 x 20.87 x 3.61 cm) Weight - 2.17 lb (.98 kg) *Sold as an Individual

LPG (Propane) Low Pressure Valve for 9" x 12" Grills This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.  Stainless steel and brass control valve connects to the systems low pressure side of the regulator. *Must be used with Magma Connection Kit Compatible With: Magma 9" x 12" Rectangular grills *Sold as an Individual 

Serving Shelf with Removable Cutting Board for 9" x 18" Grills Enhance your grilling experience while increasing your work area with a detachable serving shelf.  This 18-8 mirror polished marine grade Stainless Steel serving shelf includes a removable cutting board.  The board is manufactured using a high density polyethylene material which is FDA approved, UV stabilized and will not crack, mold, mildew, or retain any unwanted odors.  Cutting board is also replaceable.  The shelf installs instantly making clean up and storage a breeze.  Conveniently stores inside of your grill when not in use.  Compatible With: Rectangular Grills w/ 9" x 18" Grilling Surface or Larger Technical Specifications: Material - Mirror Polished 18-8 Stainless Steel  Dimensions (L x W x H) - 17-1/4" x 8-3/16" x 1-7/16" (43.87 x 20.87 x 3.61 cm) Weight - 3.25 lb (1.48 kg) *Sold as an Individual

Rectangular Grill Cover - 9" x 12" - Jet Black  These grill covers are designed specifically to fit any Magma rectangular grill with a 9” X 12” grilling surface and are available in boating’s most popular colors.   Constructed from breathable solution-dyed acrylic fabric that is water and fade-resistant.  The material is guaranteed with a 5-year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.  The convenient drawstring and cam-lock assembly keep it secured while underway or in windy conditions. Compatible With: Magma rectangular grill with a 9” X 12” grilling surface *Sold as an Individual 

Rectangular Grill Cover - 9" x 12" - Pacific Blue  These grill covers are designed specifically to fit any Magma rectangular grill with a 9” X 12” grilling surface and are available in boating’s most popular colors.   Constructed from breathable solution-dyed acrylic fabric that is water and fade-resistant.  The material is guaranteed with a 5-year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.  The convenient drawstring and cam-lock assembly keep it secured while underway or in windy conditions. Compatible With: Magma rectangular grill with a 9” X 12” grilling surface *Sold as an Individual 

XKA Stainless Steel Trim Tab Kit with Rocker Switch - 9 x 12 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking.  Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run. Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm) Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm) Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) Flat Rocker Switch Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

XKA Stainless Steel Trim Tab Kit with One-Touch Control - 9 x 12  The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  Lectrotab's one-touch leveling LED control puts the complete control of your trim tabs at your fingertips.   Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Rocker Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm)  Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2.5" (57 to 64 mm)  Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) One-Touch Control  Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

XKA Stainless Steel Trim Tab Kit with MLC-1 Control - 9 x 12  The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  The Lectrotab MLC-1 is a microprocessor based trim tab control that can move both tabs simultaneously at the touch of a single button.  It includes LED tab position indicators which will automatically dim in darkness and brighten in sunlight. Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Manual Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12  The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

XKA Aluminum Alloy Trim Tab Kit with Rocker Switch - 9 x 12 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  Lectrotab's new flat rocker switch has improved sealing to prevent water entry and recessed rocker to prevent breaking.  Specially designed to provide and "instant stop" circuit when the switches are released, thus preventing actuator over-run.  Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm) Boat Length - 16' to 25' (5 to 7.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Rocker Switch Dimensions (W x H) - 3.125" x 3.25" (79.4 x 82.5 mm) Rocker Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm) Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) Flat Rocker Switch Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit