Pressure Sender 150 PSI - 1/8-27 NPT  Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 29/12 Max. Pressure  - 150 PSI / 10 bar (10-180Ohm)  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 80 PSI - 1/8-27 NPTF Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 29/4 Max. Pressure Range - 80PSI / 5 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 80 PSI 1/4-18 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Max. Pressure Range - 80 PSI / 5 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 150 PSI Floating Ground - 1/8-27 NPT  Features: Ground - Floating Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 32/14 Max. Pressure Range - 150PSI / 10 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Temperature Sensor 240° F - 1/8-27NPTF All Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground).  Please note: VDO sensors have tapered threads and DO NOT require the use of Teflon tape or pipe sealant. This will interfere with grounding causing incorrect instrument readings.  Features: Marine 240°/250°F Temperature Sender 1/8-27 NTPF Threads All brass construction #8-32 Connection Works with most standard marine temperature gauges *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 80 PSI  Features: Ground - Standard Connection - 10-32 Stud Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - AT84200 Max. Pressure Range - 80PSI / 5 bar (240-33Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 400 PSI Floating Ground - 1/8-27 NPT  Features: Ground - Floating Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 38/8 Max. Pressure Range - 400PSI / 28 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pressure Sender 80 PSI Floating Ground - 1/8-27 NPT  Features: Ground - Floating Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 32/1 Max. Pressure Range -80 PSI / 5 bar (10-180Ohm) *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Station Floating Ground - 400 PSI 1/8-27NPT Features: Ground - Floating  Connection - Knurled Nut Voltage - 6 - 24V Thread - 1/8-27 NPTF Max. Pressure Range - 400 PSI / 25.58 Bar  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SingleViu 52mm (2-1/16") Oil Pressure Gauge - 150 PSI - 0-180 Ohm SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.  These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired. *0 - 180 Ohm Sender Required Features: 0-180Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SingleViu 52mm (2-1/16") Oil Pressure Gauge - 150 PSI SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.  These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired. *Requires 0-180 Ohm sender Features: 10-184Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 and 12 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SingleViu 52mm (2-1/16") Air Pressure Gauge - 150 PSI - 0-180 Ohm SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.  These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired. *0 - 180 ohm Sender Required Features: 10-184Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SingleViu 52mm (2-1/16") Brake Pressure Gauge - 150 PSI - 0-180 Ohm  SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.  These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired. *0 - 180 Ohm Sender Required Features: 10-184 Ω Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SingleViu 52mm (2-1/16") Oil Pressure Gauge - 150 PSI - 0-4.5V SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.  These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired. *0 - 4.5V Sender Required Features: 0 - 4.5V Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Temperature Sender 250°F/120°C Floating Ground - 1/2-14 NPTF Features: Ground - Floating Connection - .25" Spade Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 805/1/4 Max. Temperature Scale - 250°F/120°C  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.