|
"Special Ops" Powerwheel - Black w/Black Nut & Knob
Edson's Special Ops ComfortGrip PowerWheel is finished in a rugged durable black finish. The Special Ops wheel was designed specifically for hard working mariners patrolling the waterways in agency or work vessels - but is just as at home on a custom flats skiff in the Florida Keys or a center console chasing stripers!
This Edson Special Ops Wheel comes with a non-reflective black powder-coated wheel nut as well as the Sportsman PowerKnob, designed for the demanding conditions of coastal and offshore operations.
Features:
13" Diameter w/ 3/4" tapered wheel hub
ComfortGrip padding
Solid cast 316 stainless construction
Matte Black Stainless Steel Finish
Includes 316 1" Stainless Matte Black Wheel Nut with insert for 12mm and 5/8”-18 threads.
Includes Sportsman Series PowerKnob & Black Wheel Nut
|
688.50 |
|
|
V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut - Black
Features:
Speed knob and nut included
All black, including the speed knob & chrome nut
Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards
Specifications:
Diameter: (inch) 13.5"
12mm Wheel Nut - 1.75mm thread pitch
Material: Stainless steel
3 spokes
|
318.17 |
|
|
V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob - Black
Features:
Speed knob included
All black, including the speed knob
Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards
Specifications:
Diameter: (inch) 13.5"
Material: Stainless steel
3 spokes
*Note: Wheel nut is not included and is needed for installation
|
276.43 |
|
|
G-Force ELIMINATOR Black Prop Nut for Garmin Force Trolling Motor
One of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life.
Made to fit Garmin Force trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
|
53.99 |
|
|
G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling Motor
One of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life.
Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures the nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
Patent pending
|
53.99 |
|
|
M12 Black Wheel Nut
The M12 Wheel Nut is meant for Uflex steering wheels. A wheel nut is needed for the installation process of a Uflex steering wheel.
Features:
Color: Black
Specifications (inch):
Length: 2"
Width: 2"
Height: 2"
*Sold as an Individual
|
41.87 |
|
|
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Motorguide Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|
|
G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
53.99 |
|
|
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling Motor
One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.
Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.
Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.
Key ELIMINATOR Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Available in popular colors
Visually appealing
Designed and made in the U.S.A.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.81 |
|
|
2-Position SPST Push-Pull Switch w/Contoured Knob - OFF/ON
Single pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. All knobs are screw-on type.
Features:
Nominal voltage is 6-36V DC
Rated for 10A at 12V DC
#8-32 screw terminals
Fits panels up to 3/4" thick
Same as Cole Hersee part number M-628
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.49 |
|
|
1/2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1/2"
|
23.33 |
|
|
3/4" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 3/4"
|
29.33 |
|
|
1" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1"
|
40.00 |
|
|
1-1/4" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1-1/4"
|
57.34 |
|
|
1-1/2" Bronze Combo Scoop Thru-Hull w/Nut
Features:
Designed for increased flow compared to standard Thru Hulls
NPSM / NPT combination thread
C83600 Bronze
Specifications:
Thread NPS: 1-1/2"
|
64.00 |
|