Raymarine In-Line Terminator In-Line SeaTalkng Terminator f/Long Cable Runs old part number a80001 , now its a06074

NMEA 2000 in-line terminator WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

In-Line Check Valve 1"-1 1/2" Stepped Connection All Whale bilge switches, non-return valves, strainers and pipework fittings are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel. LV1215 In-line Check Valve 25mm / 38mm (1"/ 1 1/2") Stepped Connection WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

In-Line Fuel Demand Valve Attwood's exclusive Fuel Demand Valve eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. The valve ensures that fuel is supplied to the engine only when demanded during start-up or engine operation. Designed in partnership with OEM engine manufacturers,  Attwood’s Fuel Demand Valve is compatible with all OEM engine brands. Features: Prevents engine flooding and fuel spillage due to pressurized fuel Allows only the amount of fuel requested by the engine and prevents a pressurized "slug" of fuel from reaching the engine Made of high-strength composite material designed to withstand the harsh marine environment Compatible with 3/8" and 5/16" fuel hose Installs between the fuel tank and the primer bulb Low vacuum restriction helps ensure proper engine function during startup and engine operation (less than 2kPa at 125 liters/hour) Built-in manual override Compatible with Ethanol blended fuels Specifications: Operating Temperature: -4 degrees F to 176 degrees F / -20 degrees C to 80 degrees C / Storage Temperature: -40 degrees F to 176 degrees F / 40 degrees C to 80 degrees C Operating Input Pressure: 138 kPa (20 psi) protected for 276 kPa (40 psi) psi pressure spike Flow Performance: 125 L/H (33 GPH) at <2 kPa (10" gasoline) Hose Size: (inch) 5/16" – 3/8" / (mm) 8 – 10 *Fuel Demand Valve keeps all pressure at the fuel tank when the engine is off

Series 20 Ball Bearing Block - Double, In-Line Features: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction. Applications: Dinghy control lines Dinghy vangs Cunninghams Traveller controls Dinghy barber haulers Spinnaker pole launching systems Materials: Stainless Steel ball bearings UV stabilized Acetal sheave Grade 316 Stainless Steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks

1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

3/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/4" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

Little Giant Submersible Pump 588205 Little Giant 1-EUAA-MD Submersible or In-Line Pump Motor 115 Volt 60Hz 1/200 HP Epoxy Encapsulated Motor, 150 GPH at 1 Foot Head, Shutoff Head 5 Feet, Inlet: 1/2" Hose or Screened, Outlet: 1/2" Hose, Polypropylene Body, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 6 Foot Power Cord   588205 1" magnet drive pump is designed for salt or fresh water applications. This dual purpose, epoxy-encapsulated pump has 1/2" OD inlet for inline use and a screened inlet for submersible use.   This Little Giant Aquarium pump is ideal for aquariums.

SHURflo 94-672-00, In-Line Fuse Kit

5064 ATO/ATC In-Line Fuse Holder Supplied with 12 AWG pigtails 30A Maximum fuse amperage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5065 ATO/ATC Waterproof In-Line Fuse Holder supplied with 12 AWG pigtails 30A Maximum fuse amperage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.