 |
BURKS 5CT6M, TURBINE PUMP 115/230V 1/2HP 1PH
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
 |
BURKS 5CT5M, TURBINE PUMP 115/230V 1/2HP 1PH
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
 |
BURKS 24CT6M, Turbine Pump 115/230v 1"Ports
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/4 Horsepower, 1750 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2118.60 |
|
 |
BURKS 15CS6M, Turbine Pump 1.5HP 115/230v
Bronze Fitted Cast Iron Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2820.38 |
|
 |
BURKS 5WT5, PUMP SELF PRIME 115/230v 1PH 1/2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 2 Inches NPT Inlet, 2 Inches NPT Outlet.
|
1844.10 |
|
 |
BURKS 15CS5M, Turbine Pump Close Coupled 115/230v
Bronze Fitted Cast Iron Construction. Close Coupled to a 1.5 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2820.38 |
|
 |
Oberdorfer 101M-F13 Cent Pump 1/3Hp 1Ph 115V
|
980.10 |
|
 |
FINISH THOMPSON KC5PCVN2701 PUMP 1/3HP 1PH POLYPRO
|
770.40 |
|
 |
BURKS 310CS6M, TURBINE PUMP 1 HP 3 PH 230/460 volts
Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction.
Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2407.24 |
|
 |
BURKS 315CS5M, TURBINE PUMP 230/460V 1.5HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
|
2882.48 |
|
 |
Oberdorfer 700A-F13 Cent Pump 1/3Hp 115/230V
|
1258.20 |
|
 |
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.
300B-F21 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/3HP 1PH Explosion Proof
|
2687.41 |
|
 |
BURKS 315CS6M TURBINE PUMP 230/460 Volts 1.5HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades – therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Easy to service as a result
Especially relevant, Every pump factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications.
For High Temp Models please use the Contact Us page, also use the Contact Us page for a Shipping Quote.
|
2882.48 |
|
 |
Oberdorfer 300B Series Self Priming Centrifugal Pump
FEATURES
Pump Body:
Bronze
Ports:
1" NPT
Flow:
22 GPM Max
Pressure:
15 PSI Max, 35 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Buna Seal Standard, Viton or Teflon Optional
Shaft:
Stainless Steel Standard, Monel Optional
Motor / Drive:
Attaches to NEMA C flange jet pump motors with threaded shaft of stainless steel or monel. We can supply additional motors and assemble if required.
APPLICATIONS / CHARACTERISTICS
CLOSE COUPLED BRONZE SELF-PRIMING CENTRIFUGAL PUMP
Bronze Models with Monel Shaft Sleeve - Ideal for marine service (air conditioning, bilge, and sea water recirculating). Can handle most difficult solvents with proper seal arrangement. Suction lift of 15 feet without a foot or check valve.
300B-01-F26 is Oberdorfers - Self Priming Centrifugal Pump Bronze 1/3HP 115/230V Monel Shaft
|
1944.07 |
|
 |
BURKS 3CR6M-V, Turbine Pump 1/3HP 1PH 230V Viton
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction w/ Viton seal & O-Ring.
Close Coupled to a 1/3 Horsepower, 3450 RPM, 230 Volts, 1 Phase Motor.
Ports are 1/2 Inches NPT Inlet, 1/2 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1762.20 |
|
