Rudder Angle Sensor f/ Dual Station Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 1.5 - 90 Ohm Resistance value -  1.5 - 90 Ohm - 2 Gauges  Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rudder Angle Sensor f/ Single Station  Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 3 - 180 Ohm Resistance value -  3 - 180 Ohm Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183 Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication. It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class. Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it. The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration. Features: Designed for NMEA 0183 Easy programing and installation Technical Specifications: Operating Voltage - 8 to 32 V Protection Class - IP6K7 Illumination - Red LED Dial - Black w/graphics Pointer - Red Illuminated Lens - Plastic Double Lens (anti-reflective) Operating Temp. - -40°C to 115°C Connector - Molex MX150 - 12 pin In the Box: Gauge  Wire Harness Mounting Spinlock Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - Black Dial & Bezel The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.   Only rudder instruments of the same diameter can be combined. Specifications: 8 and 14 pole Tyco / Hirschmann bush housing  Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading Anti-fog double lens Protection rating front IP67, rear IP52 85 mm installation diameter 50 mm installation depth  Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - White Dial & Bezel The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.   Only rudder instruments of the same diameter can be combined. Specifications: 8 and 14 pole Tyco / Hirschmann bush housing  Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading Anti-fog double lens Protection rating front IP67, rear IP52 85 mm installation diameter 50 mm installation depth  Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MK5 Rudder Angle Indicator The Ruddermaster indicates at a glance how far the rudder is from a straight-ahead position. As the steering wheel is turned, the sending unit communicates the angle of the rudder to the calibration box. The calibration box transmits the rudder’s position to the meter. The Ruddermaster can be used both as a steering aid and to monitor auto pilot systems. Raritan offers several styles of meters for readout as well as some that are splash proof. Repeating units can also be installed should there be a need for a readout at a station and not the main control panel. Features: Ready for installation with all necessary components needed - meter, calibration box and sending unit Constant monitoring of rudder angle position from 0°-45° Great aid for docking or close maneuvering Each unit is assembled by hand, individually tested and backed by Raritan's 1-year Limited Warranty and legendary technical support team Repeater units are available for multiple station readouts Rudder Indicator with 4-1/2" flush mount panoramic meter WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

52MM (2-1/16") ViewLine Rudder Angle Gauge 40° STB/Port - Black Dial & Bezel Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio. The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.  Interchangeable bezel option. Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ViewLine 52mm (2-1/16") Rudder Angle Indicator - 40° Port/Starboard The ViewLine rudder angle gauge for wheel-controlled yachts displays the current rudder position at all times. An important cockpit gauge for accident-free maneuvers in narrow waterways.  Features: 8 pole Tyco/Hirschmann bush housing  Operating voltage 8–32 V   Current consumption <150 mA • Anti-fog double lens  Front side protection rating IP67  52 installation diameter  50 mm installation depth *Sold as an Individual Piece This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

52MM (2-1/16") OceanLink Rudder Angle Gauge - Left/Right - Black Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rudder Angle Sender Single Station - Standard or Floating Ground Faria sending unit transmits a signal to indicate the current rudder position to a single rudder angle gauge. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MK2 Rudder Indicator w/2" RD. Analog Panel Meter, Chrome, 12v The Ruddermaster indicates at a glance how far the rudder is from a straight-ahead position. As the steering wheel is turned, the sending unit communicates the angle of the rudder to the calibration box. The calibration box transmits the rudder’s position to the meter. The Ruddermaster can be used both as a steering aid and to monitor auto pilot systems. Raritan offers several styles of meters for readout as well as some that are splash proof. Repeating units can also be installed should there be a need for a readout at a station and not the main control panel. Features: Useful aid for docking or close maneuvering Constant monitoring of rudder angle position from 0 to 45 degrees Ready for installation with all necessary components needed - meter, calibration box and sending unit MK2 model 2" Round Sprayproof (IP64) Backlit WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

52MM (2-1/16") OceanLink Rudder Angle Gauge - Left/Right - White Dial & Bezel OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.   Interchangeable bezel option.  Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GRF™ 10 - Rudder Feedback Sensor Compatible Devices Pair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is - giving them an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds. Additionally, the GRF 10, allows sailors to: Know where the rudder is positioned without having to look back Make smoother maneuvers and avoid over-compensating Save undue wear and stress on their autopilot system by eliminating force on the rudder when it's already stopped left or right. Specifications: 6.5" Cable Max cable length 49' Compass safe distance 3.2' WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stand Alone Rudder Angle Indicator System Complete single station RAI system typically used on vessels that do not have a ComNav autopilot or, in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). The Stand Alone System consists of three components: ComNav Rudder Follower w/50' cable and linkage kit RAI Distribution Box w/special circuitry ComNav 3" Rudder Angle Indicator

One Box Dual Station for Hydraulic Systems An attractive and user-friendly, stand-alone helm control without the need for an external control unit. The functionality and “brains” of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad. Reduce bow rise, plane faster, and correct listing. Features: Convenient “All Up” and “All Down” buttons Trim tab position LEDs always show you where your tabs are Auto tab retraction (tabs retract up when the ignition is powered off) Easy-to-install single lock nut design Compatible with other trim tab system brands Backed by Bennett’s outstanding customer support Engineered for Ease of Installation What's In The Box? (1) Integrated Helm Display (2) Actuator Upper Hinges with 6′ sensors (2) 20′ Extension sensor cables (Deutch to Deutch) (1) Installation instructions Required hardware for various retrofit options This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.