|
ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.27 |
|
|
ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm
VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.
These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.
Features:
Connection - M4 Stud
Voltage: 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.68 |
|
|
ALAS I Adjustable Fuel Sender - 6 to15-3/4" - 240-33 Ohm
For a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level! These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement).
The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm. So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver.
Features:
Connection - .25" Spade
Mounting Hardware - Included
Low Fuel Warning Contact
Voltage - 6 to 24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.01 |
|
|
ALAS I Adjustable Fuel Sender - 6 to 15-3/4" - 3-180 Ohm
For a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level! These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement).
The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm. So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver.
Features:
Connection - .250" Spade
Mounting Hardware - Included
Low Fuel Warning Contact
Voltage - 6-24V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.50 |
|
|
Reed Switch Fuel Sender - 600 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 23.6" (600mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.48 |
|
|
Reed Switch Fuel Sender - 150 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 6" (150mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.90 |
|
|
Reed Switch Fuel Sender - 180mm
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 7.2" (180mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.90 |
|
|
Reed Switch Fuel Sender - 200 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 8" (200mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.90 |
|
|
Reed Switch Fuel Sender - 230 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 9.2" (230mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.90 |
|
|
Reed Switch Fuel Sender - 250mm
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 10" (250mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.47 |
|
|
Reed Switch Fuel Sender - 270 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 10.8" (270mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.47 |
|
|
Reed Switch Fuel Sender - 300 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 11.8" (300mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.94 |
|
|
Reed Switch Fuel Sender - 330 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 12.9" (330mm)
Insulated 1/4" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.94 |
|
|
Reed Switch Fuel Sender - 350 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 13.8" (350mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
49.81 |
|
|
Reed Switch Fuel Sender - 400 MM
Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements. This revolutionary design comes with many benefits! This is ideal for applications where a conventional swing arm will not fit due to clearance issues. The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.
The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out. It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware.
Features:
Stainless steel construction
Ethanol resistant Viton gasket
240-33 Ohm range
Fits tanks with a depth of 15.75" (400mm)
Insulated 1/4"" spade connectors
Standard 5 hole mounting flange
Works with most standard marine fuel gauges
Ground - Floating
Connection - Insulated .25" Spade
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.98 |
|