|
Fuse Holder C100
Fuse holder, type C100 including cover, suitable for fuses of 40 to 500 amp
|
70.20 |
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps
The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.
Features:
Blister packaging promotes the easy retail display
Compatible with MEGA high-current bolt-down fuses up to 500 amps
Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
Slots molded into the base enable secure tie-wrap mounting
Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
Includes stainless steel M8 studs, hex nuts, and split washers
The flexible cover has a UL 94 V-0 flammability rating
Applications:
Battery and Alternator Connections
High-Current Circuit Protection
Electric Construction Equipment
*Fuses not included
|
12.43 |
|
|
MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.
Features:
Blister packaging promotes the easy retail display
Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
M5 threaded studs, split washers, and hex nuts for simple fuse installation
Protective cover openings at the ends accommodate heavy-duty cables
Applications:
High-Current Circuit Protection
*Fuses not included
|
6.65 |
|
|
Marine Grade Fuse Holder 8 GA
DS18 has new fuse holders that you can be sure to use in almost all weather conditions, the MFH8. This weatherproof fuse holder is completely sealed from the elements.
Features:
Water tight construction to prevent short circuits and corrosion.
Included allen keys, ferrules, and allen bolts to help maintain the tightest connection.
Comes with an assortment of fuses so you can pick the correct fuse based on your amp power requirements.
Made of high strength plastic to give unparalleled long lasting durability.
Specifications:
1pc X Fuse Holder Includes Red Silicone Sheath (Size : OD6.5MM)
4pcs X ATC Fuse (30A x 2, 40A x 2)
2pcs x Allen Key(Nickel Plating, 2mm x 1,3mm x 1)
Bass Accsessories, Silver plating
Tubular termian x 8:8 AWG x 4, 10 AWG x 4
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.34 |
|
|
Fuse Holder ANL 300A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.85 |
|
|
Marine Grade Fuse Holder 4 GA
DS18 has new fuse holders that you can be sure to use in almost all weather conditions, the MFH4. This weatherproof fuse holder is completely sealed from the elements.
Features:
Water tight construction to prevent short circuits and corrosion.
Included allen keys, ferrules, and allen bolts to help maintain the tightest connection.
Comes with an assortment of fuses so you can pick the correct fuse based on your amp power requirements.
Made of high strength plastic to give unparalleled long lasting durability.
Specifications:
1pc X Fuse Holder Includes Red Silicone Sheath (Size : OD6.5MM)
3pcs X AFS Fuse (80A x 1, 100A x 1, 150A x 1)
3pcs x Allen Key(Nickel Plating, 2mm x 1,3mm x 1, 4mm x 1)
Bass Accessories, Silver plating
Tubular terminal x 8:8 AWG x 4, 10 AWG x 4
∗Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.34 |
|
|
Class T Fuse Holder with 2 Additional Studs 225-400A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
Class-T: 225-400 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
Class T Fuse Holder with 2 Additional Studs 450-600A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
Class-T: 450-600 Amp
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
59.23 |
|
|
Modular Fuse Holder for MEGA Fuse
The dovetail feature allows interlocking multiple fuse holders.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
42.84 |
|
|
ANL Fuse Holder with 2 Additional Studs, 750A
Providing high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.
Radiused ends improve cable routing options
ANL: for use with 5/16" (8mm) or 3/8" (10mm) ANL fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.47 |
|
|
VANL ANL Fuse Holder - 1/0 to 4 AWG
It can be tough to find a good place for your system's fuse holder in a crowded engine compartment. T-SPEC helps you out with their extremely compact Series rotating ANL fuse holder for 1/0-gauge wire that can fit almost anywhere. Black nickel-plated brass construction ensures excellent current flow, while a polycarbonate cover protects the fuse against impacts and dirt.
Features:
Compact fuse holder with 360° rotating base
Accepts an ANL fuse (not included)
Connects to 1/0 to 4 gauge power wire
Black nickel-plated brass construction
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fastening screws can be used with a variety of tools
In the Box:
V12-series ANL fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
Installation sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.68 |
|
|
VMANL Mini-ANL Fuse Holder - 4 to 8 AWG
T-SPEC'S VMANL fuse holder ensures excellent current flow by using sturdy, lock-down fasteners to secure your power cable, so you don't have to worry about it getting loose over time. Combine this with solid brass construction and water resistance, and you've got a great link between your amp and your battery that will protect your electrical system.
The T-SPEC VMANL fuse holder accepts 4 to 8 gauge power cables and mini-ANL fuses.
Features:
Compact fuse holder with 360° rotating base
Accepts mini-ANL fuses
Connects to 4- to 8-gauge power cable
Solid brass construction
Black nickel finish
Water resistant
T20 Torx® screws
Gate Lock technology
In the Box:
One (1) mini-ANL fuse holder
Two (2) Threaded end-caps
4 and 8 gauge rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.64 |
|
|
VANL1 ANL Fuse Holder - 1/0 to 4 AWG
It can be tough to find a good place for your system's fuse holder in a crowded engine compartment. T-SPEC helps you out with their extremely compact ANL fuse holder for 1/0-gauge wire that can fit almost anywhere. Black nickel-plated brass construction ensures excellent current flow, while a polycarbonate cover protects the fuse against impacts and dirt.
Features:
Compact fuse holder
Accepts an ANL fuse (not included)
Connects to 1/0 to 4 gauge power wire
Black nickel-plated brass
Anodized finish resists rust
Impact-resistant polycarbonate cover
Fuse fastening screws can be used with a variety of tools
TPE wrapped soft touch
Dual sizes gasket set
Water resistant
In the Box:
ANL fuse holder
Plastic cover
2 Rubber grommets (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.56 |
|
|
Sealed Heavy-Duty ATO Fuse Holder - 30A - 12AWG
Sealed In-line ATO and MINI fuse holders are designed to allow easy installation of fusing into potentially wet or dirty environments outside of the cab. Use with ATO fuses 1-30A or MINI fuses 2-30A. Comes with twin 8” red GXL wire leads for easy in-line installation.
Features & Benefits:
Rated IP67 with sealed cover for moisture & dust resistance
Includes two 8” Red GXL wire leads for easy in-line installation
Specifications:
Max Voltage: 32V DC
Available Fuse Rating: 1-30A
Ingress Protection: IP67
Operating Temp: -40° to 85° C
Applications:
Local circuit protection outside of the cab
External accessory lighting
|
8.32 |
|