Closable Deck Ventilator Type The UFO2 is a high-gloss polished deck ventilator with an integral mushroom ventilator that can be made watertight. When opened, it ensures ventilation and is rain- or splash-proof. Specifications: Material: Stainless steel Hose Connection Diameter (mm): N/a Free Flow Area cm²: 30 Sort Ventilator: 0

Mounting Cap Propeller Type BP1342 Replacement Mounting Cap half for the VETUS 178mm Bow Thruster Propellers Order two units for a full cap set

DeckHand Pontoon Manufacturer item #1810141 For pontoons, this DeckHand gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. Automatically raise and lower your anchor at the touch of a button. DeckHand 40 has a 40-lb anchor capacity (anchor not included) and is pre-spooled with 100 feet of 800-lb test nylon rope. Universal davit can be mounted at base of DeckHand or in remote position on boat deck. Davit also stows anchor horizontally to eliminate anchor swing. Anchor shackle allows for quick changes between anchors. A special anti-drag system senses the bottom to allow for controlled drifting. Runs on 12-volt battery (not included). Includes: Standard DeckHand 40 anchor winch MKA-16-02 Quick Release Bracket Corded Remote Accessory (DH-40) MKR-12 quick connect plug WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

March MDXT-3 Magnetic Drive Pump Applications for the include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioning.   March Pump's industrial MDXT-3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8.5 gallons per minute at ;4 feet, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 0.5 inch female pipe thread, and the outlet is 0.375 inch female pipe thread. The standard motor is a 1 Phase 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDXT-3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.   The MDXT-3 has pumped has pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and many more chemicals.   Unit System 60Hz 50Hz Max Flow 8.5 GPM 30 LPM Max Head 19 FT 4 M Power .04 HP .029 KW Electrical 115V 50/60HZ or 230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1/2"FPT Outlet 3/8"FPT Wet End Polypropylene (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Buna N (O-Ring), Ceramic Magnet

Flojet 20381-V Viton O'Ring For Ports  

BURKS 3CR6M-V, Turbine Pump 1/3HP 1PH 230V Viton Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction w/ Viton seal & O-Ring. Close Coupled to a 1/3 Horsepower, 3450 RPM, 230 Volts, 1 Phase Motor. Ports are 1/2 Inches NPT Inlet, 1/2 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS 3CR6M-V-SP, Turbine Pump 230v with Plug and Ground Wire Turbine Pump and Motor unit. Close Coupled to a 1/3 Horsepower, 3450 RPM, 230 HZ , 60 Volt, 1 Phase, ODP Motor. Ports are 1/2 Inches NPT Inlet, 1/2 Inches NPT Outlet.   UNSPSC Code: 40150000

MDM Pumps G201 V ASM Imp Cap Assy W/Vit Oring

MDM Pumps G200 V ASM Impeller Cap Assembly

MDM Pumps G203 V Viton Case Oring

Ampco Pumps S114-90A-V Casing Gasket - Viton - 114

Ampco Pumps S216-90A-V Casing Gasket - Viton - 216

Ampco Pumps S328-90A-V Casing Gasket-Viton-218/328

Haight Pump RV1040VSB-V Rv Cover Vit 50-80 Psi

Tuthill 4108-V-CC-A-7 Pump Tang Shaft Gear 1" Tuthill 4108V-CC-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 13 GPM 4108 Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.   Features Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 40-70 PSI. Other PSI ranges available. Shaft Seal :Mechanical Seal Viton Port Size: Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT.