|
17lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved
This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.
Features:
Non-corrosive 3-layer fiberglass composite cylindrical
Ergonomic collar for a nice look
The handle makes it easier to carry
Type 1 valve
Frequent Questions:
Where can they be refilled?
These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.
How safe are these cylinders?
These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”
When do they need to be recertified?
Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.
How long is the useful life of the cylinder?
Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.
Will cylinders work in cold climates?
The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.
Will the cylinders work in warm climates?
The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.
|
242.04 |
|
|
11lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved
This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.
Features:
Non-corrosive 3-layer fiberglass composite cylindrical
Ergonomic collar for a nice look
The handle makes it easier to carry
Type 1 valve
Frequent Questions:
Where can they be refilled?
These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.
How safe are these cylinders?
These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”
When do they need to be recertified?
Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.
How long is the useful life of the cylinder?
Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.
Will cylinders work in cold climates?
The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.
Will the cylinders work in warm climates?
The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.
|
249.05 |
|
|
22lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved
This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder.
Features:
Non-corrosive 3-layer fiberglass composite cylindrical
Ergonomic collar for a nice look
The handle makes it easier to carry
Type 1 valve
Frequent Questions:
Where can they be refilled?
These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station.
How safe are these cylinders?
These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.”
When do they need to be recertified?
Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here.
How long is the useful life of the cylinder?
Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC.
Will cylinders work in cold climates?
The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix.
Will the cylinders work in warm climates?
The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.
|
254.21 |
|
|
Adult USCG Approved Reversible Type 1 Life Vest
The USCG-approved MV8100 Adult Life Vest Type 1 Life vest provides 22 lbs. (98 Newtons) of buoyancy. The MV8100 incorporates a reversible design allowing quick on and off, while added SOLAS-grade reflective strips improve visibility, simplifying search and rescue efforts. Heavy-duty stainless steel hardware and streamlined contouring ensure durability while making this PFD easy to stack and store.
Features:
Designed to keep unconscious wearers face-up
Reversible design for quick on and of
Stackable for easy storage
Heavy-duty stainless steel hardware
SOLAS-grade reflective material
Universal size fits 30”-52” chest
22 lbs / 98 Newtons of buoyancy
Approved for use by individuals weighing 90 lbs. or more
Specifications:
Ideal For: Boating
Material: Shell: 200D Nylon, Foam: PE
Weight (lbs): 1.2 lbs
Buoyancy: 22
Type/Level: Type I
|
53.09 |
|
|
Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim
|
1989.00 |
|
|
Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI Cylinder
TWICE THE POWER
The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.
HALF THE POWER CONSUMPTION
Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not. This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately. This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.
PINPOINT ACCURACY
Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.
SAVE ON INSTALLATION COSTS
A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.
ADJUSTABLE FLOW RATE
A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases. Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.
Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.
Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat.
Features:
Reliable - Piston pump technology with only three moving parts
Twice the Power - Delivers over twice the hydraulic output per watt of input
Half the Power Consumption - Accurate ram positioning means fewer course corrections
Adjustable Flow Rate - Configure performance to suit your vessel
Easy Servicing - Shut off valves allow removal without draining steering system
|
522.79 |
|
|
Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting Base
The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation.
Powder Coated Marine Grade Aluminum
|
105.36 |
|
|
Roper Pump 1AM03 Pump W/O Relief Valve Mech
Roper A Series Gear Pump model 1AM03
Cast Iron Housing/ Ductile Iron Gears/ Bronze Bushings/ Buna Mechanical Seal/ No Relief Valve
3/4″ NPT Ports
General Transfer Applications
|
880.20 |
|
|
Type 1 Commercial Adult Life Jacket - Vest Style - Universal
Kent Adult Universal Jacket Style Life Jacket
Features:
Designed for extended survival in rough waters where rescue may be slow in coming
Turns most unconscious wearers face up in water
Bright orange fabric
SOLAS grade reflective material for increased visibility
Attachment loop for safety light
USCG approved/SOLAS compliant whistle attached
Adjustable straps for a snug fit
Minimum 22 lbs. of buoyancy
* U.S. Coast Guard Approved Type I Life Jacket/Personal Flotation Device (PFD)
|
75.43 |
|
|
Jabsco Pump 1" Ped Hp Neo Tc Acme
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1" ACME Threads with Bevel Seat or Clamp Type
Flow:
Nominal 23 USgallons/min (87 Litres/min) at 1750rpm
Pressure:
Pressure up to 4 bar
Impeller:
3A Food Grade Neoprene or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft).
DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk.
FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter.
BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines.
PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.
Jabsco Pedestal Pump 316SS 1" Acme Ports High Pressure Neoprene Impeller Tungsten Carbide Seal
|
4727.71 |
|
|
Vertical Battery Switch Cluster w/DVSR - 1 Engine/2 Batteries
BEP Dual Battery Switches with Digital VSR and Emergency Parallel
Dual Battery charging clusters
For use on charging systems under 140Amps
To be used in the following systems:
Single outboard dual battery bank
Single alternator inboard engine dual battery bank
Dimensions:
276L X 69W x 75H mm (vertical)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
185.77 |
|
|
SOLAS Type 1 Child Life Jacket - Orange
The ONLY lifejacket to have earned four regulatory approvals in one compact design. After several years of extensive design and testing, Mustang Survival is proud to announce the 4-ONE.
Stack vests head to toe and front to front, for optimal space savings.
Features:
Compact storage
SOLAS grade reflective tape
SOLAS approved whistle
Attachment point for personal light (light not included)
Buoyant buddy line
Lifting loop
Certifications:
U.S.C.G. Type I Lifejacket
U.S.C.G. SOLAS
Marine Equipment Directive SOLAS
Transport Canada SOLAS
International SOLAS
Technical Specifications:
Color - Orange
Dimensions (L x W x H) - 22" x 11.38" x 4.38" (56 x 29 x 11 cm)
Weight - 1.5 lb
Maximum Chest Size - 55" (140 cm)
Child Weight Capacity - 33 to 95 lb
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
95.39 |
|
|
Haight Pump 1U-T21B Pump W/Type21 Buna Seal
Features
Pump Body: Ductile Iron
Impeller: Steel Shaft
Seal: Buna-N Mechanical Seal
Inlet Port: 3/4 inch NPT
Discharge Port: 3/4 inch NPT
Haight 1U-T21B is a Ductile Iron Gear Pump, round hub Pump End Only less motor, 1 GPM rated, with Ductile Iron Construction, Buna-N Mechanical Seal, Steel Shaft, Steel Gears, Iron Rotor and Bearings. The standard construction materials of this pump are Ductile Iron Housing, Steel Shaft and Pinion Gears, Iron Rotor and Bearings, Buna N Lip Seals and Elastomers. These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.
Applications
Petroleum Products
Machine Manufacturing Applications
Machine Tools
Hydraulic Equipment
Lubrication Systems
Glue and Ink
Soap and Detergent Products
Building and Highway Contractors
Paper Products Industries
Automotive Applications
Shipbuilding Applications
Aircraft Applications
Mining Applications
|
634.46 |
|
|
SOLAS Type 1 Adult Life Jacket - Orange
The ONLY lifejacket to have earned four regulatory approvals in one compact design. After several years of extensive design and testing, Mustang Survival is proud to announce the 4-ONE.
Stack vests head to toe and front to front, for optimal space savings. When stowed properly, two vests stacked on top of each other will take up just 11-1/2" of depth.
Features:
Compact storage
SOLAS grade reflective tape
SOLAS approved whistle
Attachment point for personal light (light not included)
Buoyant buddy line
Lifting loop
Certifications:
U.S.C.G. Type I Lifejacket
U.S.C.G. SOLAS
Marine Equipment Directive SOLAS
Transport Canada SOLAS
International SOLAS
Technical Specifications:
Color - Orange
Dimensions (L x W x H) - 24.75" x 12.5" x 5.75" (63 x 32 x 15 cm)
Weight - 2.1 lb
Maximum Chest Size - 69" (175 cm)
Adult weight Capacity - 95 lb+
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
106.50 |
|
|
Type 1 Linear Drive - 12V
Linear drive for mechancically steered vessels up to 22,000lb (10,000kg).
Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation.
Features:
Low backdrive force, to minimize the drives effect on the boats steering when the autopilot is in standby
A powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox
High performance for minimum current consumption
|
2154.98 |
|