11lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder. Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions: Where can they be refilled? These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station. How safe are these cylinders? These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.” When do they need to be recertified? Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here. How long is the useful life of the cylinder? Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC. Will cylinders work in cold climates? The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix. Will the cylinders work in warm climates? The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.

17lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder. Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions: Where can they be refilled? These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station. How safe are these cylinders? These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.” When do they need to be recertified? Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here. How long is the useful life of the cylinder? Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC. Will cylinders work in cold climates? The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix. Will the cylinders work in warm climates? The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.

22lb Vertical Fiberglass Composite LPG Cylinder with Type 1 Valve - OPD, DOT, TC Approved This composite propane tank has an internal bladder encased in fiberglass, which allows users to see the gas level. The propane construction also means this cylinder is lighter than a standard steel cylinder. Features: Non-corrosive 3-layer fiberglass composite cylindrical Ergonomic collar for a nice look The handle makes it easier to carry Type 1 valve Frequent Questions: Where can they be refilled? These cylinders are DOT-approved for the USA, as well as TC-approved for Canada, and can be filled at any reputable refilling station. How safe are these cylinders? These LPG cylinders are designed with safety in mind. They started with the boss and blown-molded polypropylene internal bladder, and then the outer winding of fiberglass to ensure a tough finish. Then it is encased in a UV-protected outer casing that allows for light to pass through so that you can see how much propane is left in the cylinder. "Safest on the market.” When do they need to be recertified? Your cylinder needs to be re-qualified every 5 years via an external visual inspection by an approved re-qualifier. As per TC and DOT, the valve does not need to be removed for inspection or replaced here. How long is the useful life of the cylinder? Currently, the useful life is 15 years from the date of manufacture, and the service life is determined by DOT and TC. Will cylinders work in cold climates? The cylinders are tested and approved down to -40°F/C. However, the use of LPG in low temperatures is limited by the vaporization capability of the specific LPG mix. Will the cylinders work in warm climates? The cylinders are designed to withstand temperatures well above 149°F (65°C), and users who live in hot climates report that the design holds up well to regular use in steamy temperatures.

Adult USCG Approved Reversible Type 1 Life Vest The USCG-approved MV8100 Adult Life Vest Type 1 Life vest provides 22 lbs. (98 Newtons) of buoyancy. The MV8100 incorporates a reversible design allowing quick on and off, while added SOLAS-grade reflective strips improve visibility, simplifying search and rescue efforts. Heavy-duty stainless steel hardware and streamlined contouring ensure durability while making this PFD easy to stack and store.  Features: Designed to keep unconscious wearers face-up Reversible design for quick on and of Stackable for easy storage Heavy-duty stainless steel hardware SOLAS-grade reflective material Universal size fits 30”-52” chest 22 lbs / 98 Newtons of buoyancy Approved for use by individuals weighing 90 lbs. or more Specifications: Ideal For: Boating Material: Shell: 200D Nylon, Foam: PE Weight (lbs): 1.2 lbs Buoyancy: 22 Type/Level: Type I

Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim  

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 15 CI Cylinder TWICE THE POWER The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump. HALF THE POWER CONSUMPTION Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps. PINPOINT ACCURACY Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation. SAVE ON INSTALLATION COSTS A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold. ADJUSTABLE FLOW RATE A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system. Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat.  Features: Reliable - Piston pump technology with only three moving parts Twice the Power - Delivers over twice the hydraulic output per watt of input Half the Power Consumption - Accurate ram positioning means fewer course corrections Adjustable Flow Rate - Configure performance to suit your vessel Easy Servicing - Shut off valves allow removal without draining steering system

Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting Base The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation. Powder Coated Marine Grade Aluminum

Roper Pump 1AM03 Pump W/O Relief Valve Mech Roper A Series Gear Pump model 1AM03   Cast Iron Housing/ Ductile Iron Gears/ Bronze Bushings/ Buna Mechanical Seal/ No Relief Valve 3/4″ NPT Ports General Transfer Applications

Type 1 Commercial Adult Life Jacket - Vest Style - Universal Kent Adult Universal Jacket Style Life Jacket Features: Designed for extended survival in rough waters where rescue may be slow in coming Turns most unconscious wearers face up in water Bright orange fabric SOLAS grade reflective material for increased visibility Attachment loop for safety light USCG approved/SOLAS compliant whistle attached Adjustable straps for a snug fit Minimum 22 lbs. of buoyancy * U.S. Coast Guard Approved Type I Life Jacket/Personal Flotation Device (PFD)

Jabsco Pump 1" Ped Hp Neo Tc Acme   FEATURES Pump Body: 316 Stainless Steel Pedestal Pump Port Size: 1" ACME Threads with Bevel Seat or Clamp Type Flow: Nominal 23 USgallons/min (87 Litres/min) at 1750rpm Pressure: Pressure up to 4 bar Impeller: 3A Food Grade Neoprene or EPDM Shaft Seal: Mechanical; Carbon-on-Ceramic or Tungsten Carbide; Food Grade Nitrile Shaft: 316 Stainless Steel     APPLICATIONS / CHARACTERISTICS Handles soft solids - max. 12mm diameter. Certified to US 3A Standard 02-09. Clean-In-Place (CIP) or easy strip clean. Handles viscosities up to 50,000 centiPoise. Minimal shear to thixotropic fluids. Easy to service and maintain. Self-priming from dry up to 2.4m (7.8ft). DAIRY: Transfer and processing of raw milk, cream, milk whey, buttermilk, condensed milk. FOODS: Processing of eggs, sugar liquors, brines, catsup, chocolate, glaze, gelatin, honey, jams, jellies, mayonnaise, molasses, mustard, pickle relish, vinegar, water, yeast slurries, syrups, liquids containing solids in suspension such as chopped tomatoes, nuts, peanut butter. BEVERAGE: Circulating and transferring alcohols, beers, brewery slop, cider, distillery wort, extracts, flavors, juice, mash, soft drink syrups, wines. PHARMACEUTICAL: Moving medicines, cosmetics, process chemicals, lotions, preparations, filtering solutions, used as a filling line supply pump.   Jabsco Pedestal Pump 316SS 1" Acme Ports High Pressure Neoprene Impeller Tungsten Carbide Seal

Vertical Battery Switch Cluster w/DVSR - 1 Engine/2 Batteries BEP Dual Battery Switches with Digital VSR and Emergency Parallel Dual Battery charging clusters For use on charging systems under 140Amps To be used in the following systems: Single outboard dual battery bank Single alternator inboard engine dual battery bank Dimensions: 276L X 69W x 75H mm (vertical) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SOLAS Type 1 Child Life Jacket - Orange The ONLY lifejacket to have earned four regulatory approvals in one compact design.  After several years of extensive design and testing, Mustang Survival is proud to announce the 4-ONE. Stack vests head to toe and front to front, for optimal space savings.   Features: Compact storage SOLAS grade reflective tape SOLAS approved whistle Attachment point for personal light (light not included) Buoyant buddy line Lifting loop Certifications: U.S.C.G. Type I Lifejacket  U.S.C.G. SOLAS Marine Equipment Directive SOLAS Transport Canada SOLAS  International SOLAS Technical Specifications: Color - Orange Dimensions (L x W x H) - 22" x 11.38" x 4.38" (56 x 29 x 11 cm) Weight - 1.5 lb Maximum Chest Size - 55" (140 cm) Child Weight Capacity - 33 to 95 lb *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

SOLAS Type 1 Adult Life Jacket - Orange The ONLY lifejacket to have earned four regulatory approvals in one compact design.  After several years of extensive design and testing, Mustang Survival is proud to announce the 4-ONE. Stack vests head to toe and front to front, for optimal space savings.  When stowed properly, two vests stacked on top of each other will take up just 11-1/2" of depth. Features: Compact storage SOLAS grade reflective tape SOLAS approved whistle Attachment point for personal light (light not included) Buoyant buddy line Lifting loop Certifications: U.S.C.G. Type I Lifejacket  U.S.C.G. SOLAS Marine Equipment Directive SOLAS Transport Canada SOLAS  International SOLAS Technical Specifications: Color - Orange Dimensions (L x W x H) - 24.75" x 12.5" x 5.75" (63 x 32 x 15 cm) Weight - 2.1 lb Maximum Chest Size - 69" (175 cm) Adult weight Capacity - 95 lb+ *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RAM Mount Composite Diamond Base w/1" Ball Part #: RAP-B-238U The RAP-B-238U, composite diamond base, contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.