Ultra Safety Systems High Water Alarm Switch 12/24 Volts ULTRA ALARM SWITCH Normally Open or Normally close contact for high water alarm system, with Magnetic Test Switch. Limited to 100 mAmp max. Mini version only 5 year warranty

Ultra Safety Systems High Water Alarm A201 ULTRA BATTERY ALARM Recess Mount Extra Loud 103 db high water alarm. Test, mute and red LED indicator light. Complete alarm package. Use with PS-01 and PS-03. Operating time-40 hours. Uses two 9 volt batteries (Not included)

Ultra Safety Systems Ultimate SR 24/32 Volt Bilge Switch ULTRA PUMPSWITCH SR Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in. 24/32V at 10 Amps U.L.(30 Amps relay). Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).  Lifetime warranty.

Ultra Safety Systems US Ultimate SR 12V Bilge Switch ULTRA PUMPSWITCH SR Automatic Bilge pump operation (1 1/4" differential) with isolated high water alarm switch (at 3"), built-in. 12V at 15Amp. Alarm circuit is Normally Open or Normally Closed contacts (current limited to 100 mA max).  Lifetime warranty.

Ultra Safety Systems Hi Diff Switch PS-04 12V ULTRA PUMPSWITCH Hi DIFFERENTIAL 1 inch greater difference in on/off setpoints than UPS-02 (2 1/4 inch differential)  Eliminates cycling associated with longer discharge lines and deep bilge sumps.  12 Volt  5 year warranty

Ultra Safety Systems US Ultimate JR Bilge Switch 12V ULTRA PUMPSWITCH JR Automatic bilge pump switch. 6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential). 12 Volts at 15 Amps 5 year warranty

Ultra Safety Systems Ultimate Mini Bilge Switch 12V ULTRA PUMP SWITCH MINI 4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential 12 Volts/40 Amp relay 20 Amp continues pump load With Magnetic Test Switch 5 year warranty

Ultra Safety Systems Teflon Lube Syringe THE ORIGINAL TEF-GEL FOOD GRADE 20cc Syringe Contain no Silica NSN 8030014504009  

Ultra Safety Systems Bilge Switch Ultimate JR 24/32 VOLT ULTRA PUMPSWITCH JR Automatic bilge pump switch. 6 1/4 inch high and 2 1/2 inch diameter (1 1/4 inch ON/OFF differential). 24/32 Volts at 10 Amps (30 Amp relay) 5 year warranty

Ultra Safety Systems Ultimate Mini Bilge Switch 24/32V ULTRA PUMPSWITCH MINI 4 inch high, 1 3/4 inch diameter, 3/4 inch ON/OFF differential. 24/32 Volts. 40 Amp relay 20 Amp continuous pump load With Magnetic Test Switch. 5 year warranty

Bilge Alert High Water Alarm - 12V Sensor The Johnson Bilge Alert High Water Alarm detects disruptions in a bilge pump from water or other fluids. The alarm is very small, easy to mount, and is held within a sealed case that resists all corrosion or potential damage from oil and debris. The Johnson Bilge Pump Alert system utilizes a patented Mirus field effect detector cell that produces a micro-electrical field. When activated, the system triggers a 100db piezo alarm and LED light on the control panel. To prevent false alarms, water must disrupt the sensor for 8 seconds before going off. In addition, a 3-way rocker switch allows users to test, arm, and turn off the alarm.

Bilge Alert High Water Alarm - 12V Ultima High water alarm featuring digital technology using the patented Mires field effect. Totally sealed fluid detectors are never in contact with water, will not corrode, and are not affected by oil or debris. Bilge Alert detects water and sends a signal (3 seconds delay) to the alarm and switch conveniently mounted on a panel. A three-way rocker switch allows the switch to be tested, turned off, and armed.  Features: 12V high water alarm features digital technology Sealed fluid detectors are never in contact with water and are affected by oil or debris Three-way rocker switch allows the alarm to be tested, turned off, and armed

High Bilge Water Alarm - Surface Mount - Black Features: Visual and Audible Alarm Indicator Dual signaling before maximum bilge water conditions exist, sounds an alarm & activates warning light Marine Proven Exclusively designed for the harsh marine environment Sensor has been used in bilge's for over 15 years, not effected by fuel spills or other chemicals Float Sensor Monitors bilge for high water Will not false alarm from morning dew, high humidity, splashes, hose over spray or buildup of oil or contamination Microprocessor controlled Eliminates false alarms from rough seas, chop and vibration Test/Mute button Tests alarm with a push of a button. Mutes alarm while boater investigates the problem Easy installation Install at the helm or in the cabin Compliant with ABYC Standard H-22

Johnson 72303 Bilge Alert 12V High Water Alarm weight: 1.28 ounces dimensions: 4.5 x 3.75 x 3 inches

Digital High Water Alarm - 12V The 12V digital bilge sensor detects when there is water in the bilge or a tank. Field sensing digital technology, fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. 12V display panel, 1 LED and piezo alarm integrated, including 152mm (6″) wire leads, fuse and fuse holder. Features: Electronic Sensor Specifications: Weight: 0.05 kg/1 lb *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance