|
FMB323 Flush Mount for UM725 Series
Flush Mount Bracket for UM725 VHF Marine Radio.
Fits Models: All UM725 Models (UM725, UM725G, and UM725GBT)
|
11.26 |
|
|
JABSCO WATER PRESSURE REGULATOR
FLUSH MOUNT MODEL 44411-SERIES
Designed for day and night protection of the entire plumbing system fromunregulated city water system hook-ups. Whether connected to a dock-sidemain or a campground faucet, the new Jabsco Regulator will maintain regulatedoutput at low or high flow rates. The removable strainer protectsvalves and seal-seats from pipe scale and other debris.
FEATURES
Reduces unregulated city water pressures that can runas high as 125 psi down to a safe 45 psi - automatically
Features built-in backflow preventer. Federal and Staterequired on RV's with water service hookup
Flush mounts permanently in vessel super structure
Easily replaces most original city water entries
Automatic pressure regulation
Built-in backflow preventer
Easy cleaning strainer
Dust cap
|
45.90 |
|
|
JABSCO WATER PRESSURE REGULATOR
FLUSH MOUNT MODEL 44411-SERIES
Designed for day and night protection of the entire plumbing system fromunregulated city water system hook-ups. Whether connected to a dock-sidemain or a campground faucet, the new Jabsco Regulator will maintain regulatedoutput at low or high flow rates. The removable strainer protectsvalves and seal-seats from pipe scale and other debris.
FEATURES
Reduces unregulated city water pressures that can runas high as 125 psi down to a safe 45 psi - automatically
Features built-in backflow preventer. Federal and Staterequired on RV's with water service hookup
Flush mounts permanently in vessel super structure
Easily replaces most original city water entries
Automatic pressure regulation
Built-in backflow preventer
Easy cleaning strainer
Dust cap
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
49.85 |
|
|
Out-Front Bike Mount for Edge® Series & Forerunner® 310XT, 910XT & 920XT
Put you and your data ahead of the pack with Garmin's out-front bike mount.
This mount allows you to take full advantage of all of the robust data that Edge® provides without compromising the ride. The Edge® is out in front of you for easier, heads-up positioning and increased safety.
Use a Forerunner® 910XT or 310XT with a quick release kit (sold separately) for training? You can use them with this mount, too. All you have to do is remove the screws from the bottom, rotate the inner-mount and reinsert the screws, and your watch will mount in the proper orientation on the handle bar.
Compatible Devices:
Edge® Series
Forerunner® 310XT
Forerunner® 910XT
Forerunner® 920XT
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.39 |
|
|
Handlebar Mount for Montana® Series
Take your Montana® anywhere and everywhere with this handlebar mount. Simply snap your device - in any orientation, portrait or landscape - into the 22 to 32mm rugged mount, which attaches to any standard bicycle handlebar, and it's ready for your next cycling tour or mountain biking adventure.
A molded rubber cushion is included in the kit to increase the mount's grip on the handlebar and also to prevent rotation during possible vibration. Kit also includes hardware and instructions.
Compatible Devices:
Montana®; 600
Montana® 650
Montana® 650t
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.98 |
|
|
Watersport Mount for VIRB® Series
Mount your compatible VIRB action camera to your favorite watersport and capture your entire adventure. The mount is perfect for capturing on-water adventures, including surfing, kayaking, boating, wakeboarding and more.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
Remote Mic for UM725 VHF Radios - White
Uniden UMRMIC Remote, Second Station Microphone.
Features:
Remote, second station wired remote microphone
Direct connection to the UM725 series fixed mount VHF radio series
Fully remote control of connected Uniden Marine VHF radio, including channels, DSC Distress, NOAA Weather Channels, and more
Intercom feature between the main radio and the remote microphone
Large, Clear “Landscape” oriented, Full Dot Matrix LCD Display
Bright White LCD Backlight for Day, Orange for the night (User selectable)
Private Text Messaging – Send messages over Marine Channels to other equipped radios
NOAA Weather Channels – With Weather Alerts
IPX8 Rated Waterproof – Submersible to 4.9ft. for 30min with no water intrusion
Included Accessories – 24-foot inter-connect cable, Microphone Hanger, Mounting Hardware
Optional extension inter-connect, up to 75ft
|
129.98 |
|
|
Remote Mic for UM725 VHF Radios - Black
Uniden UMRMIC Remote, Second Station Microphone.
Features:
Remote, second station wired remote microphone
Direct connection to the UM725 series fixed mount VHF radio series
Fully remote control of connected Uniden Marine VHF radio, including channels, DSC Distress, NOAA Weather Channels, and more
Intercom feature between the main radio and the remote microphone
Large, Clear “Landscape” oriented, Full Dot Matrix LCD Display
Bright White LCD Backlight for Day, Orange for the night (User selectable)
Private Text Messaging – Send messages over Marine Channels to other equipped radios
NOAA Weather Channels – With Weather Alerts
IPX8 Rated Waterproof – Submersible to 4.9ft. for 30min with no water intrusion
Included Accessories – 24-foot inter-connect cable, Microphone Hanger, Mounting Hardware
Optional extension inter-connect, up to 75ft
|
129.98 |
|
|
Uniden VHF Fixed Mount Marine Radios
Emergencies are never waterproof, so be sure to stay safe at sea with Uniden VHF Fixed Mount Marine Radios. Trust GPS and DSC features in Uniden Fixed Mount Marine Radios when you need them most. Keep your signal strong and your mind at ease with Uniden.
Specials Closeouts Remanufactured Rebates
|
|
|
This mounting kit is used to flush mount the Uniden Oceanus, UM525, UM415, UM415 and UM625 VHF Radios in your console.
|
11.26 |
|
|
FM-F65RW FM Series 6.5" Flush Mount Round Marine Speakers - White Grill - 120W
Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends.
Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish.
With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season.
Enhanced Design Aesthetics
The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues.
Innovative Flush Mount Design
The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker.
The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel.
The True-Marine™ Standard
As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty.
IP65 Weatherproof
Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection.
Designed To Comply With ISO12216
The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality.
Features:
Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes.
Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel.
Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel.
True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation.
Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness.
Specifications:
Speaker Size: 6.5"
Peak Power: 120W
RMS Power Rating: 30W
Efficiency (1W/1M): 87 dB
Frequency Response: 100 Hz - 18 kHz
Nominal Impedance: 4 Ohms
Recommended Amplifier Power (RMS): 15-80W/Ch
Tweeter Type: Aluminum Dome
Cone/Surround Material: Polypropylene with rubber surround
Mounting Diameter Clearance: 138mm (5-7/16")
Mounting Depth Clearance: 70mm (2-3/4")
Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L
Operating Temperature Range: 0-50°C (32-122°F)
Storage Temperature Range: -20-70°C (-4-158°F)
Water and Dust Resistance (IPX rating): IP65
Warranty: 3 Years
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.99 |
|
|
FM-S10SB FM Series 10" 400W Flush Mount Marine Subwoofer - Square Grill - Black
Clear audio, clean aesthetics, all-class.
Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine subwoofers are designed to deliver high-quality bass to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends.
Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series subwoofers are designed to be flush mounted with a mounting flange no thicker than 3mm [1/8"] for a premium, visually-appealing, near-flat finish.
With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series subwoofers are built to last on board season after season.
Features:
Optimized 2.1 Configuration: When connected with a pair of FM Series speakers and a Fusion Multi-Zone™ stereo with DSP, you have the option of creating a 2.1 audio zone to simplify installation and reduce system cost by adding bass without the need for an external amplifier.
Quality Audio Reproduction: Enjoy quality low frequency audio at any volume level.
Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel.
Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the subwoofer in place without creating any screw holes to your vessel.
True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation.
Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness.
Specifications:
Subwoofer Size: 10"
Peak Power: 400W
RMS Power Rating: 120W
Efficiency (1W/1M): 87 dB
Frequency Response: 30 Hz - 2 kHz
Nominal Impedance: 4 Ohms
Recommended Amplifier Power (RMS): 40-300 W/Ch
Cone/Surround Material: Polypropylene with rubber surround
Mounting Diameter Clearance: 269mm x 269mm (10-9/16" x 10-9/16")
Mounting Depth Clearance: 140mm (5-1/2")
Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 40L
Operating Temperature Range: 0-50°C (32-122°F)
Storage Temperature Range: -20-70°C (-4-158°F)
Water and Dust Resistance (IPX rating): IP65
Warranty: 3 Years
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
251.99 |
|
|
D-Series PRO Hybrid Diffused Flush Mount White Light
The D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
50,000 Plus Hour Lifespan
9-36 V DC
Durable UV Resistant Powder Coat
High-Grade Aluminum Alloy
Integrated Thermal Management System
Impact Resistant Polycarbonate Lens
Over/Under Voltage Protection
RFI/EMI Protection
Reverse Polarity Protection
RoHS Compliant
IP68 Compliant - Dust/Water Ingress
Operating Temp -40 Deg F To +145 Deg F
SAE J575 Compliant - Shock/Vibration
Available In White And Black Housing
Pressure Equalizing Vent
Waterproof Connector (Exclusions Apply)
Limited Lifetime Warranty
Off Road Use Only
What's Included?
Mounting Hardware
Stainless Steel, U-Shape Bracket (Excludes FM)
Vibration Isolators (Heavy Duty Surface Only)
Harness with Switch
Deutsch Connector
*Sold as a single
|
117.59 |
|
|
PP4409 PowerPod Pre-Cut f/Garmin STRIKER™ 7sv/7dv 7" CHIRP Fishfinder (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4409 PowerPod Pre-Cut for Garmin STRIKER™ 7" 7sv/7dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|