USB Programming Cable for DMA Scanners This Uniden® USB-1 USB-to-RS232 cable converts the small serial jack to a USB port on a PC. It's compatible with models BCD396T, BCD396XT, BC346XT, BC246T, BR330T, SC230, BC95XLT, BCD996T, BCD996XT, BCT15XT and BCT15. Features: Suitable for personal or professional use Compatible with BC246T, BC346XT, BC95XLT, BC95XLTB, BCD396T, BCD396XT, BCD996T, BCT15, BR330T and SC230 3.9" L x 1.75" W x 1" H Warranty: 1-year

Standard USB-57B USB Programming Cable USB programming cable for most Standard Horizon handheld VHF radios PC Only

USB-62C Programming Cable USB Programming Cable for current Standard Horizon Fixed Mount VHF radios. The USB-62C must be used with the CT-99 to program Fixed Mount VHF radiosfrom a PC.

CT-99 Clone/Programming Cable* PC Programming adapter cable for all current Fixed Mount Radios. *Requires software and a USB adapter cable sold separately (USB-62C)

USB Extension Cable Give yourself some room to maneuver with Garmin's USB 6' USB extension cable. Compatible Devices: GXM™ 30 GXM™ 40 GPSMAP® 3xx Series GPSMAP® 4xx Series GPSMAP® 696 zūmo® 550 aera® 796 StreetPilot® 2730 StreetPilot® 7200 StreetPilot® 7500 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

USB/Charger Cable Clip your compatible wrist-worn device into the cradle and use the attached USB interface to plug into your computer or power adapter to recharge the battery. It can also be used to transfer waypoints, routes and tracks between the device and your computer. Compatible Devices: Aviator Action Pack (D2™ and VIRB™ Elite Aviation Bundle) D2™ fēnix® fēnix® 2 quatix® tactix® WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

USB Charge Cable for HX300 USB cable for current Standard Horizon HX300 unit.

Programming Cable w/USB Connectors PC to Handheld programming Cable with USB connector for radios with 2-pin connectors

USB-C to Micro USB Adapter Cable Use this cable to connect a male Micro USB to the USB-C port on your compatible GPSMAP® 9000 series chartplotter. This cable also can be used for the USB Card reader.

Touch Encoder Unit for NavNet TZtouch2 & TZtouch3 - Black - 3M M12 to USB Adapter Cable Control all aspects of your NavNet TZtouch2 or NavNet TZtouch3 from one simple, stylish Touch Encoder! The TEU001 combines “The Best of Both Worlds” when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKey™ for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control. With a RotoKey™ and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips! This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Furuno Touch Encoder Unit for NavNet TZtouch2 & TZtouch3 - Silver - 3M M12 to USB Adapter Cable Control all aspects of your NavNet TZtouch2 or NavNet TZtouch3 from one simple, stylish Touch Encoder! The TEU001 combines “The Best of Both Worlds” when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKey™ for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control. With a RotoKey™ and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips! This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

GTU™ 10 Use this Garmin USB cable to power your device. The cable has an input voltage of 8V to 58V and an output of 5V at 500 mA. Compatible Devices: Approach® Series GLO™ GTU™ 10 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HDMI Cable f/GPSMAP 8400/8600 Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter’s screen. The GPSMAP 8400/8600 supports watching videos in full or split screen from popular devices connected with this 15-foot HDMI cable to the HDCP-compliant HDMI input port. This also allows mobile device connectivity for mirroring or streaming audio and video from HDMI-connected devices, including mobile phones and tablets connected via external adapters or dongles. Audio playback on stereos typically requires NMEA audio cable. You can also output full HD from your chartplotter screen and associated audio to an additional monitor or TV through HDMI¹. If using with a computer to gain touch control access, use with a USB cable (sold separately). Connect to DVI-D devices with standard DVI-to-HDMI adapters or cables (sold separately). ¹This will not allow display of HDCP-protected content on remote display WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

10m Scanner Cable f/3G & 4G Radar 3G/4G Scanner connection cable - 10 m (33 ft)

USB Power Cord f/Vantage Vue®, Vantage Pro2™ & Weather Envoy For Use With: Vantage Vue® Vantage Pro2™ Weather Envoy