|
90 degree mounting bezel for T73NRFC Non-Reversible Steering System
|
23.86 |
|
|
Perko 3/4" Pipe To Hose Adapter 90 Degree Bronze
Cast Bronze
Cast hex for easier installation
Curved 90 degrees
Technical Information:
Pipe Size Inches: 3/4
Hose Size Inches: 3/4
Length Overall Inches: 4-1/2
Model Number: 0063DP5PLB
Ship Weight: 2.1/9.1
*The above item meets the requirements of U.S.C.G. Safety Standards, January
31, 1977 for gasoline fuel systems, 33 CFR 183.
|
16.90 |
|
|
Perko 1" Pipe To Hose Adapter 90 Degree Bronze
Cast Bronze
Cast hex for easier installation
Curved 90 degrees
Technical Information:
Pipe Size Inches: 1
Hose Size Inches: 1
Length Overall Inches: 4-3/4
Model Number: 0063DP6PLB
Ship Weight: 3.7/16.9
*The above item meets the requirements of U.S.C.G. Safety Standards, January
31, 1977 for gasoline fuel systems, 33 CFR 183.
|
21.60 |
|
|
Perko 1-1/4" Pipe To Hose Adapter 90 Degree Bronze
Cast Bronze
Cast hex for easier installation
Curved 90 degrees
Technical Information:
Pipe Size Inches: 1-1/4
Hose Size Inches: 1-1/4
Length Overall Inches: 5-1/2
Model Number: 0063DP7PLB
Ship Weight: 5.5/25.3
*The above item meets the requirements of U.S.C.G. Safety Standards, January
31, 1977 for gasoline fuel systems, 33 CFR 183.
|
30.24 |
|
|
Perko 1-1/2" Pipe To Hose Adapter 90 Degree Bronze
Cast Bronze
Cast hex for easier installation
Curved 90 degrees
Technical Information:
Pipe Size Inches: 1-1/2
Hose Size Inches: 1-1/2
Length Overall Inches: 6
Model Number: 0063DP8PLB
Ship Weight: 7.5/14.6
*The above item meets the requirements of U.S.C.G. Safety Standards, January
31, 1977 for gasoline fuel systems, 33 CFR 183.
|
38.17 |
|
|
Perko 2" Pipe To Hose Adapter 90 Degree Bronze
Cast Bronze
Cast hex for easier installation
Curved 90 degrees
Technical Information:
Pipe Size Inches: 2
Hose Size Inches: 2
Length Overall Inches: 7
Model Number: 0063009PLB
Ship Weight: 2.9/27.1
*The above item meets the requirements of U.S.C.G. Safety Standards, January 31, 1977 for gasoline fuel systems, 33 CFR 183.
|
65.23 |
|
|
RAM® Tilt-N-Turn™ 90-Degree Bracket with Single Swing Arm
The RAM-VB-TNT90-1, Tilt-N-Turn™ 90 degree motion attachment swing arm, consists of a steel plate on a single swing arm that has a tilt range of 90 degrees forward and back from the vertical position. The small range of tilt is designed to angle a connected RAM laptop cradle forward giving you a comfortable typing and viewing angle. The Tilt-N-Turn™ plate can spin in 360 degrees around on the swing arm end, and with a twist of the side lock knob, the attachment will tilt forward and back. Knowing that this product has countless applications, numerous hole patterns are built right in making the Tilt-N-Turn™ exceptionally versatile. The AMPS, 90 degree AMPS, 75 x 75MM VESA, 2” x 4”, and RAM’s own three hole at 120 degrees take the guess work out of whether this product will work for you. Whether you have and existing RAM system and want to integrate this product, or simply need the best mounting system available, consider RAM and yet another ergonomic product; this time with the Tilt-and-Turn™ feature.
Hardware Included:
(1) 3/8"-16 x 1.5" Carriage Bolt
(1) 3/8"-18 Lock Nut
(1) 2" Rubber Washer
(2) 5/16" Flat Washer
Materials:
Powder coated steel
Marine grade-aluminum
|
41.86 |
|
|
3" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 3” / (mm) 76.2
A: (inch) 5.25" / (mm) 133
B: (inch) 5.25” / (mm) 133
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.75” / (mm) 44.4
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25” / (mm) 6.4
Elbow Degree: 90 degrees
|
70.67 |
|
|
4" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 4” / (mm) 101.6
A: (inch) 5.75" / (mm) 146
B: (inch) 5.75” / (mm) 146
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.75” / (mm) 44.4
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25” / (mm) 6.4
Elbow Degree: 90 degrees
|
103.39 |
|
|
6" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.
Features:
Four stainless steel clamps are included
This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards)
Black high-temp EDPM rubber
Construction:
Color: Black
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 250°F (121°C)
Specifications:
Inner Diameter: (inch) 6” / (mm) 152.4
A: (inch) 7" / (mm) 178
B: (inch) 7” / (mm) 178
C: (inch) 2.25” / (mm) 57
D: (inch) 2.25” / (mm) 57
R: (inch) 1.75” / (mm) 44.4
W: (inch) 0.25” / (mm) 6.4
Elbow Degree: 90 degrees
|
109.61 |
|
|
3" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 3” / (mm) 76.2
A: (inch) 5.25” / (mm) 133
B: (inch) 5.25” / (mm) 133
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.50" / (mm) 38.1
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
124.21 |
|
|
4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 4” / (mm) 101.6
A: (inch) 5.75” / (mm) 146
B: (inch) 5.75” / (mm) 146
C: (inch) 1.75” / (mm) 44.4
D: (inch) 1.50" / (mm) 38.1
R: (inch) 2” / (mm) 50.8
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
171.19 |
|
|
6" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt Clamps
Trident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside.
Features:
Four stainless steel t-bolt clamps
Very high temp silicone/EDPM blend rubber - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging
Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards
Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous
Construction:
Color: Blue
Reinforcement: Reinforcing ribs on 6” I.D. and above
Temperature Range: up to 350°F (177°C)
Specifications:
Inner Diameter: (inch) 6” / 152.4 mm
A: (inch) 7” / (mm) 178
B: (inch) 7” / (mm) 178
C: (inch) 2.25” / (mm) 57.2
D: (inch) 2" / (mm) 57.2
R: (inch) 1.75” / (mm) 44.5
W: (inch) 0.25" / (mm) 6.4
Elbow Degree: 90 degrees
|
234.49 |
|
|
RhinoFLEX 90-Degree Swivel Fitting Clear
RhinoFLEX Swivel Fittings Transparent or semi-translucent fittings connect sewer hose to waste valve fitting. Features swivel lug and bayonet fittings for a secure connection. Available in 45° or 90° style.
Features:
90-degree swivel fitting
Clear fitting to see if holding tank is empty
Swivel lug and bayonet fitting for secure connection
UV stabilized resin for long life
Connect sewer hose to your RV’s waste valve fitting
|
7.50 |
|
|
Universal 90 Degree Elbow - 1/4" NPT (National Pipe Taper) x 1/4" NPTF (National Pipe Taper Fuel) - Brass
This Attwood 90 Degree Elbow is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Clamps are not included and use thread sealant on all threads.
Features:
90-degree brass elbow & universal fitting
Material Construction: Brass
*Male and female fitting (universal)
|
6.68 |
|