|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Black XD
Rigging Kit: Center
|
305.83 |
|
|
Center Rigger Clamp-On System
For multiple lines in the water.
Features:
Clamp-on center rigger holder 1-1/8" OD base
Tigress Track® telescoping center rigger
Center rigger kit
Holder sized to fit 1-5/16" schedule pipe
Specifications:
Mount: 1-1/8" clamp-on
Clamp Size: 1-5/16"
Outrigger: 8" Silver XD
Rigging Kit: Center
|
305.83 |
|
|
Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" Holder
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.
|
88.03 |
|
|
Center Rigger Kit - Black Nylon
For double rigging your outriggers - for riggers up to 22'
Features:
30' of Black Nylon Braid
High impact release clip
1-1/4" cork stop
Glass ring snubber
Eye strap with screw
2 leader snaps
|
39.12 |
|
|
XD Center Rigger System
For multiple lines in the water.
Features:
XD Center Rigger Mount
XD Tigress Track® telescoping center riggers
Center rigger kit
Specifications:
Mount: XD Center
Outrigger: 8" Black XD
Rigging Kit: Center
|
593.46 |
|
|
XD Center Rigger System
For multiple lines in the water.
Features:
XD Tigress Track® telescoping center rigger
Center rigger kit
XD Center Rigger Mount
Specifications:
Mount: XD Center
Outrigger: 8" Silver XD
Rigging Kit: Center
|
593.46 |
|
|
XD Telescoping Aluminum Center Rigger Pole - 12' - Black
The Tigress XD Telescoping Aluminum Center Outrigger defines outrigger performance and redefines it with every trip on the water. This premier telescoping center outrigger makes an ideal choice for sport fishing boats up to 40'. Its patented Tigress Track™ Internal Tracking System sports dual tracks for increased tube strength and guiding alignment. The larger tube diameters and wall thicknesses further enhance strength and longtime durability. Anodized cold-drawn tubes inside and out maximize resistance to corrosion. Double-locking, polished 316 stainless steel push-buttons on the lower tube section ensure less "hole swallowing" than with traditional boat outriggers. Redesigned rings and tips exceed all expectations, and the marine-grade thermoplastic internal bushings provide trouble-free sliding operation. The Tigress XD Telescoping Aluminum Center Outrigger retracts to less than 6' for trailering, bridges, and storage. Includes handy, heavy-duty mesh storage bag. Manufacturer's 3-year limited warranty.
Features:
The industry's best aluminum telescoping center outrigger
Perfect for sport fishing boats up to 40'
1-1/8" butt OD
Patented Tigress Track Internal Tracking System with dual tracks for better strength and alignment
Larger tube diameters for superior durability
Anodized cold-drawn tubes inside and out for corrosion resistance
Double-locking polished 316 stainless steel push-buttons on the lower tube section
Less "hole swallowing" than with ordinary outriggers
Redesigned rings and tips
Marine-grade thermoplastic internal bushings
Includes mesh storage bag
|
311.40 |
|
|
XD Carbon Fiber Telescoping Center Outrigger
Specifications:
• Length: 8’
• Base OD: 1-1/8"
• Color: Matte Black/Silver
• For use on sport fishing boats up to 40 feet
• Patented Tigress Track® Internal Tracking System
• 3K carbon fiber woven finish
• Retracts to under 6’ for trailering, bridges and storage
• 316 Stainless Steel polished eyelets
• Redesigned rings and tips
• Lightest telescoping center rigger in the industry
• UVI thermoplastic butt sleeves to fit all Tigress top mounts
• Includes a handy, heavy duty mesh storage bag
• 1-Year Limited Warranty
|
494.02 |
|
|
XD Telescoping Aluminum Center Rigger Pole
For use on sport fishing boats up to 40 feet.
Features:
1-1/8” butt OD
Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment
Larger tube diameters and wall thicknesses for increased strength and durability
Anodized cold draw tubes inside and out for maximum protection from corrosion
Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’
Redesigned rings and tips
316 Stainless Steel polished eyelets with smooth through centers
UVI marine grade thermoplastic internal bushings for trouble free sliding operation
Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin
UVI thermoplastic butt sleeves to fit all top and center rigger mounts
Retracts to under 5' 5"’ for trailering, bridges and storage
Includes a handy, heavy duty mesh storage bag
3-Year Limited Warranty
Specifications:
Length: 8'
Base OD: 1-1/8"
Color: Black
|
197.27 |
|
|
XD Center Rigger Top Mount
For use on sport fishing boats up to 40 feet.
Features:
Accepts all Tigress XD 1-1/8” butt diameter center riggers
19 upper-arm angle/locking (@10 deg.) using Tigress XD 316 Stainless Steel tooth locking design with horizontal stops
Large ‘XD’ Aluminum 12mm thick base plate with four corner mounting
Extreme-duty 316 Stainless Steel and anodized aluminum construction
Ambidextrous mounting option to accommodate the side the tri-lobe knob is positioned on
Large 3-lobe UV ergonomic knob for changing and locking the outriggers’ elevation
Standard ¼” diameter stainless steel locking push-in-pin for outriggers
¼” through x 4.050” x 2.625” 4-bolt pattern
3-Year Limited Warranty
|
368.46 |
|
|
XD Telescoping Aluminum Center Rigger Pole
For use on sport fishing boats up to 40 feet.
Features:
1-1/8” butt OD
Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment
Larger tube diameters and wall thicknesses for increased strength and durability
Anodized cold draw tubes inside and out for maximum protection from corrosion
Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’
Redesigned rings and tips
316 Stainless Steel polished eyelets with smooth through centers
UVI marine grade thermoplastic internal bushings for trouble free sliding operation
Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin
UVI thermoplastic butt sleeves to fit all top and center rigger mounts
Retracts to under 5’ 5” for trailering, bridges and storage
Includes a handy, heavy duty mesh storage bag
3-Year Limited Warranty
Specifications:
Length: 8'
Base OD: 1-1/8"
Color: Silver
|
197.27 |
|
|
XD Telescoping Aluminum Center Outrigger Pole - 12" - Silver
The Tigress XD Telescoping Aluminum Center Outrigger defines outrigger performance and redefines it with every trip on the water. This premier telescoping center outrigger makes an ideal choice for sport fishing boats up to 40'. Its patented Tigress Track™ Internal Tracking System sports dual tracks for increased tube strength and guiding alignment. The larger tube diameters and wall thicknesses further enhance strength and longtime durability. Anodized cold-drawn tubes inside and out maximize resistance to corrosion. Double-locking, polished 316 stainless steel push-buttons on the lower tube section ensure less "hole swallowing" than with traditional boat outriggers. Redesigned rings and tips exceed all expectations, and the marine-grade thermoplastic internal bushings provide trouble-free sliding operation. The Tigress XD Telescoping Aluminum Center Outrigger retracts to less than 6' for trailering, bridges, and storage. Includes handy, heavy-duty mesh storage bag. Manufacturer's 3-year limited warranty.
Features:
The industry's best aluminum telescoping center outrigger
Perfect for sport fishing boats up to 40'
1-1/8" butt OD
Patented Tigress Track Internal Tracking System with dual tracks for better strength and alignment
Larger tube diameters for superior durability
Anodized cold-drawn tubes inside and out for corrosion resistance
Double-locking polished 316 stainless steel push-buttons on the lower tube section
Less "hole swallowing" than with ordinary outriggers
Redesigned rings and tips
Marine-grade thermoplastic internal bushings
Includes mesh storage bag
|
311.40 |
|
|
MX7000CR
Adjustable Angle holders MX7000CR (1-1/2" ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recomended poles for MX7000CR
AO8716CR - 16 ft Center Rigger (Mk II)
AO8718CR - 18 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
|
502.62 |
|
|
Fixed Angle Clamp-On Center Rigger
TACO Center Riggers are constructed from 316 marine grade stainless steel. Installation is simplified by the use of a clamp-on mount, that fits either 3/4" IPS and 1" IPS pipe found on the hoop of most standard T-Tops. Uses 1-1/8" mount outrigger.
|
146.57 |
|
|
AL7211CR
The AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard in bright silver anodized finish with a Black Spike.
Recomended poles for AL7211CR
AO8712CR - 12 ft Center Rigger (Mk II)
AO8714CR - 14 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
|
108.00 |
|