|
Power Post 3/8 - 16 Stud
• Insulated bases are glass-reinforced Nylon
• All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16.3.2.)
• Studs are 300 series stainless steel
• Assembly includes stainless steel hex nut, split lockwasher, and flat washer
• Rated for 48VDC Maximum
• Current ratings are dependent on wire and terminal size utilized
|
6.58 |
|
|
2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal
Specifications:
Max Voltage: 300 V AC/48 V DC
Number of Terminal Studs: 4
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.19 |
|
|
2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud Terminal
Specifications:
Maximum Voltage: 300 V AC/48V DC
Number of Terminal Studs: 8
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
148.81 |
|
|
PowerBar Dual BusBar - Two 3/8"-16 Studs
Provides compact high-ampere busing with 3/8" terminal studs
Specifications:
Maximum Amperage: 200A
Maximum Voltage: 48V DC
Number of Terminal Studs: 2
Terminal Type: 3/8"-16 Stud
Bus Material: Tin-Plated Copper CDA 110/UNS11000
Weight: 0.32lb (0.15 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.65 |
|
|
Power Post 1/4 - 20 Stud
• Insulated bases are glass-reinforced Nylon
• All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16.3.2.)
• Studs are 300 series stainless steel
• Assembly includes stainless steel hex nut, split lockwasher, and flat washer
• Rated for 48VDC Maximum
• Current ratings are dependent on wire and terminal size utilized
|
3.94 |
|
|
RAM® Tough-Ball™ B Size with 3/8”-16 x .375” Threaded Stud
The RAM tough ball consists of a 1" diameter rubber ball that is connected to a 3/8"-16 x .375" male threaded post.
Features:
RAM® Tough-Ball™ features a 3/8"-16 x .375" male threaded post for connection to a variety of devices
Included B size 1" RAM® rubber balls allow for connection to any B size RAM® double socket arm; ball and socket technology allows for near infinite adjustability
Made of high-strength composites with stainless steel thread posts for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Thread Pitch: 3/8"-16 x .375"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: High-strength composite and stainless steel threads
Packaging Type: Polybag
Weight: 0.1 lbs
|
9.56 |
|
|
RAM® Tough-Ball™ with 3/8"-16 X .375" Threaded Stud
Introducing the new RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real-world, and out-of-this-world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™.
The RAP-379U-371637 consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 X .375" male threaded post.
Specifications:
Thread Pitch - 3/8"-16 x .375"
Ball/Socket Size - C Size (1.5")
Weight Capacity - .15 lbs
Materials - High Strength Composite/Stainless Steel Threads
|
11.88 |
|
|
RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for Cameras
The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8"-16 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.96 |
|
|
RAM® Ball Adapter with 3/8"-16 Threaded Post
The RAM-B-236-SEC1U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. The thread length is 0.4".
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects the product packaged in a polybag.
Weight: 0.05 lbs.
|
7.62 |
|
|
RAM 1" Ball Connected to a 3/8"-16 Threaded Post
The RAM-B-236U consists of a 1" rubber ball connected to a 3/8"-16 threaded post.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
8.70 |
|
|
PowerBar 1000 - 8 3/8" Terminal Studs w/Cover
Complex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.
Features:
1,000 Amp busbar for large complex wiring systems
Tin plated pure electrical copper for maximum conductivity
Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars
Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables
One-piece serrated flange nuts ensure correct and secure connections
Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
Busbar may be cut to a shorter length to accommodate constricted spaces
Bi-directional busbar end caps allow the ganging of additional busbars
Snap on insulating cover meets ABYC and USCG requirements and includes label recess
Specs:
Number of Terminal Studs: 8
Continuous Rating: 1000A
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Accepts #10 (M5) Screws
Terminal Stud Size: 3/8
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
161.41 |
|
|
PowerBar 1000 - 12 3/8" Terminal Studs w/Cover
Complex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a 1,000 Amp busbar with various size studs and screws to connect conductors and fuse blocks.
Features:
1,000 Amp busbar for large complex wiring systems
Tin plated pure electrical copper for maximum conductivity
Stepped bus design offers two elevations for conductors which doubles the density of the wire loom compared to traditional bus bars
Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse block attachment, eliminating the need for connecting cables
One-piece serrated flange nuts ensure correct and secure connections
Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
Busbar may be cut to a shorter length to accommodate constricted spaces
Bi-directional busbar end caps allow the ganging of additional busbars
Snap on insulating cover meets ABYC and USCG requirements and includes label recess
Specs:
Number of Terminal Studs: 12
Continuous Rating: 1000A
Bus Material: Tin-Plated Copper C11000
Mounting Holes: Accepts #10 (M5) Screws
Terminal Stud Size: 3/8
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
201.79 |
|
|
RAM Spotlight Base w/3/8"-16 Post
The RAM-236U consists of a 1.5" diameter rubber ball, connected to a 3/8"-16 thread.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.52 |
|
|
Raritan 1117B Screw 3/8-16 X 1-1/8 Hx Hd
|
10.80 |
|
|
2.5" Round Base with 3/8"-16 Female Threaded Hol & 1.5" Ball
The RAM-202CNSU consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base with 3/8"-16 female threaded hole. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: Part number reflects product packaged in clear clam shell for store shelf display
Weight: 0.23 lbs.
|
15.82 |
|