|
Tuthill 1LA9-7 Viton Mechanical Seal
|
142.55 |
|
|
Tuthill 2LE-7 Pump Viton
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
715.00 |
|
|
Goulds 10K55 Carb/SC/Viton Mechanical Seal
|
151.32 |
|
|
Goulds Pump 10K45 Viton Mechanical Seal
For the following products; 3656 3756 M-L Group Cast Iron Bronze Pump Series, SSH S & M-Group / SSH-F /SSH-C
|
458.25 |
|
|
Tuthill 2C2B-C-7 Mechanically Sealed Pump
Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
|
845.58 |
|
|
Tuthill 000LE-A-7 Pump 3/8 Port
Type: Internal Gear
Maximum Flow Rate: 0.5 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 3/8 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
Configuration Assembly: Tang Shaft
|
593.75 |
|
|
Tuthill 2LEV-C-A-7 Pump 6.2Gpm Short Shaft
Type: Internal Gear
Maximum Flow Rate: 6.2 gpm
Max Pressure: 300 psi
Inlet/Outlet Port Sizes: 1/2 in NPT
Pump Body Material: Cast Iron
Wetted Materials: Steel, Carbon, Bronze, P/M Steel, Carbon
O-Ring Material: Viton, Neoprene, EPR
Seal: Viton Mechanical Seal
|
790.80 |
|
|
Tuthill 000LE-7 Pump 3/8 Ports .5 Gpm
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT.
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
593.75 |
|
|
Haight Pump 20UR-VMS Pmp 20Ur,Viton Mech Seal,Cw
Haight Pump 20UR-VMS, Ductile Iron Gear Pump, square flanged Pump End Only less motor, 20 GPM rated, with Ductile Iron Construction, Steel Shaft, Steel Gears, Iron Rotor and Bearings. Viton Mechanical Seal. Inlet Port is 1-1/4 inch NPT, Discharge Port is 1-1/4 inch NPT.
Specifications
Capacity range is: Not Available
Construction Material: Ductile Iron
Capacity (max): 20 gpm
Discharge Pressure (max): 250 psi
Temperature: 625 degrees F
|
1589.36 |
|
|
Haight Pump 3U-VMS Pump Viton Mech Seal No Rv
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 3 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
Seal: Viton Mechanical Seal
3U - DIU Series Round Hub Positive Displacement Pumps
The Universal Pump Design combines the innovation of our UniverSeal shaft seal, the rugged simplicity of Haight's proven "gear within a gear" internal gear configuration, with the flexibility of a bolt-on, integral Relief Valve assembly. This combination of pump features offers pump users unsurpassed flexibility to adapt their pumps to changing system requirements.
Universal Relief Valve - the relief valve assembly can be added at any time, in the field, with no special tools. The valve can function in either the return to suction mode, or return to tank mode. Available with three different tension springs, the relief valve operates smoothly and effectively over a broad range of setting values.
|
694.43 |
|
|
Haight Pump 5UR Viton Lip Seal R/V
Haight Pump 5UR, Ductile Iron Gear Pump, round hub Pump End Only less motor, 5 GPM rated, with built in Relief Valve, Ductile Iron Construction, Steel Shaft, Steel Gears, Iron Rotor and Bearings. Viton Mechanical Seal. Inlet Port is 3/4 inch NPT, Discharge Port is 3/4 inch NPT.
Specifications
Capacity range is: Not Available
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 5 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
All UniverSeal Shaft Seal Pumps features:
* reduce maintenance expenses - simple, quick seal changes
* less production disruption and downtime - perform maintenance in place rather than in the shop
* reduce maintenance inventory - one pump can be adapted to meet many application requirements
* provide future adaptability - easily change the pump as your needs change
* reduce replacement parts costs, no special custom design parts
* interchangeable with existing Haight pumps without modification
* pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction.
|
751.50 |
|
|
Haight Pump 5UR-VMS Pump 5U W/Rv Viton T21 Seal
Haight Pump 5UR-VMS, Ductile Iron Gear Pump, round hub Pump End Only less motor, 5 GPM rated, with built in Relief Valve, Ductile Iron Construction, Steel Shaft, Steel Gears, Iron Rotor and Bearings. Viton Mechanical Seal. Inlet Port is 3/4 inch NPT, Discharge Port is 3/4 inch NPT.
Specifications
Capacity range is: Not Available
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 5 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
All UniverSeal Shaft Seal Pumps features:
* reduce maintenance expenses - simple, quick seal changes
* less production disruption and downtime - perform maintenance in place rather than in the shop
* reduce maintenance inventory - one pump can be adapted to meet many application requirements
* provide future adaptability - easily change the pump as your needs change
* reduce replacement parts costs, no special custom design parts
* interchangeable with existing Haight pumps without modification
* pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction.
|
862.10 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
Tuthill CCI203017-CV Cci203017-Cv Viton Sl Pump
Tuthill CCI203017-CV, Cast Iron Rotary Gear Pump. Pump End Only, NO motor. 30 GPM CC Series. Cast Iron Construction, with Internal Relief Valve. Internal Relief Valve. Relief valve is set at 100 PSI (can be adjusted in field). Nema frame size is 143/145TC. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1582.02 |
|
|
Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports
Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1174.02 |
|