Tuthill 10154600 Square Key

Groco 1/8 Square Key 1/8 Square Key  

Tuthill P500-26 Gear Key

Tuthill P500-26-S4 Impeller Key

Tuthill 0LEV-C-A-7 Pump Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.   Features : Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI. Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2C2B-C-7 Mechanically Sealed Pump Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT. Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT.

Tuthill 2RC2AS-RH Pump with Tang Shaft Tuthill Pump 2RC2AS-RH

Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 4C2EN-C-7 Pump 36Gpm 1 1/2 Ports With Tuthill 4C2EN-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Ball Bearing on Shaft. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 4108-V-CC-A-7 Pump Tang Shaft Gear 1" Tuthill 4108V-CC-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 13 GPM 4108 Series. Cast Iron Construction NO motor. Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field). COUNTER Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.   Features Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 40-70 PSI. Other PSI ranges available. Shaft Seal :Mechanical Seal Viton Port Size: Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT.

Tuthill 4C2FV-C-A-7 Gear Pump (505000) Tuthill 4C2FV-C-A-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Has Internal Relief Valve. Relief valve is set at 90 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view). Tang Shaft. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Relief Valve:Relief valve is factory set to 90 PSI for adjustment between 30-225 PSI. Other PSI ranges available.  Shaft Seal:Sleeve Bushing Lip Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill CCI101517-CV 1-1/2" 15G C-Face Pump W/Rv Tuthill CCI101517-CV, Cast Iron Rotary Gear Pump. Pump End Only, NO motor. 15 GPM CC Series. Cast Iron Construction, with Internal Relief Valve. Internal Relief Valve. Relief valve is set at 100 PSI (can be adjusted in field). Nema frame size is 56C. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.

Tuthill 4RC2F-RH-C Pump Tuthill 4RC2F-RH, Cast Iron Rotary Gear Pump C2F FEATURES Flange Mount Configuration Spring Loaded Viton Lip Seal Inlet Pressure to 25 PSI Discharge Pressure to 100 PSI Maximum Differential Pressure to 100 PSI Positive Displacement Internal Rotary Gear Design Cast Iron Construction with NPT Top Ports Typical Viscosity Range is 40 - 10,000 SSU Temperatures to 375°F

Tuthill CCI203017 Pump 1 1/2" 30Gpm 145Tc Tuthill CCI203017, Cast Iron Rotary Gear Pump. Pump End Only, NO motor. 30 GPM CC Series. Cast Iron Construction. Nema frame size is 143/145TC. Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT  Discharge Port is 1-1/2 inch NPT.