Tuthill 000LEV-C-7 Pump 0.5Gpm 3/8 Ports Pump Body: Cast Iron  Relief Valve: Relief valve is factory set to 55 PSI with adjustment between 55-120 PSI Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Product Specs : Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 00LE-C-7 Pump 1Gpm 1 1/2" Ports Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT. Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 000LE-A-7 Pump 3/8 Port Type: Internal Gear Maximum Flow Rate: 0.5 gpm Max Pressure: 300 psi Inlet/Outlet Port Sizes: 3/8 in NPT Pump Body Material: Cast Iron Wetted Materials: Steel, Carbon, Bronze, P/M Steel, PPS O-Ring Material: Viton, Neoprene, EPR Seal: Viton Mechanical Seal Configuration Assembly: Tang Shaft

Tuthill 00LEV-CC-7 Pump 1Gpm 1/2Ports Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field) Counter Clockwise rotation only (from shaft end view) Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU      

Tuthill 2LEVK-C-7 Pump 6.2Gpm with Reverse & Outer Bearing

Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing Cast Iron Rotary Gear Pump Pump End Only 8 GPM C Series Pump Cast Iron Construction NO motor Ball Bearing on Shaft Clockwise rotation only (from shaft end view) Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT

Tuthill 2C2B-C-7 Mechanically Sealed Pump Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT. Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1 inch NPT Discharge Port is 1 inch NPT.

Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg Cast Iron Rotary Gear Pump Pump End Only, 17 GPM C Series Pump Cast Iron Construction Ball Bearing on Shaft Clockwise rotation only (from shaft end view) Inlet Port is 1-1/4 inch NPT Discharge Port is 1-1/4 inch NPT

Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing Cast Iron Rotary Gear Pump Pump End Only L Series Pump Cast Iron Construction NO motor Outboard Ball Bearing on Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEV-C-7 Pump Pump Body: Cast Iron Relief Valve: Relief valve is factory set to 55 PSI for adjustment between 55-120 PSI Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports Cast Iron Rotary Gear Pump. Pump End Only. L Series Pump  Cast Iron Construction Clockwise rotation only (from shaft end view). Outboard Ball Bearing on Shaft Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 1LE-7 Pump 3.2Gpm 1/2"Ports Viton Cast Iron Rotary Gear Pump Pump End Only, NO motor Cast Iron Construction Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 0LE-C-7 Pump 1.8Gpm 1/2 Ports Cast Iron Rotary Gear Pump Pump End Only, NO motor L Series Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field) Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.8 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.   Features : Pump Body:Cast Iron  Shaft Seal:Mechanical Seal Viton  Port Size:Inlet Port is 1-1/2 inch NPT Discharge Port is 1-1/2 inch NPT.