Super-Duty Washdown Pump  Self-priming, 12V diaphragm pump with sealed, pressure switch control and vibration dampening polymer isolating mounting base. Washdown pumps are ideal for cleaning leisure boats, fish boxes, anchor chains, and dinghies. Suitable for fresh and saltwater.  Built for heavy-duty, on-board applications, this TRAC washdown pump has a 5.3 GPM flow rate and boasts 70 PSI. A professional-grade pump, this TRAC washdown pump can be used for both marine and RV applications. Features: Smooth, quiet operation and flow Runs dry without damage Seamless motor shell  Low power draw Ignition protection Easy, quick-connect fittings Technical Specifications: Flow Rate - 5.3 GPM Pressure - 70 PSI Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HotShot HD4 Heavy Duty Washdown Pump - 12V - 4 GPM - 60 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD5 Heavy Duty Washdown Pump - 12V - 5 GPM - 70 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters  No kit versions with hose offered WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD6 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 6 GPM - 70 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD4 Heavy Duty Washdown Pump - 24V - 4 GPM - 60 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HotShot HD6 Heavy Duty Washdown Pump - 24V - 6 GPM - 70 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Submersible Thru-Hull Pump - 600 GPH The TRAC 69320 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump ideal for all watercraft.  Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.  This versatile thru-hull pump comes packaged with a 3/4" 600 GPH outlet.  The outlet has an O-ring for easy maneuverability without stripping.  It can run dry without damage and is designed to have a low-power draw.  The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps. Features: Runs dry without damage Meets ABYC, NMMA, Coast Guard, and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Submersible Thru-Hull Pump - 800/1100 GPH The TRAC 69321 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump that's ideal for all watercraft.  Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.  This versatile thru-hull pump comes packaged with a 1-1/8" 1100 GPH outlet and a 3/4" 800 GPH outlet.  Each outlet has an O-ring for easy maneuverability without stripping.  It can run dry without damage and is designed to have a low-power draw.  The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  Features: Runs dry without damage Meets ABYC, NMMA, Coast Guard, and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HotShot HD4 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 4 GPM - 60 PSI Years of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits.  HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life.  Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion.  Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

FINISH THOMPSON DB11V-T DB11,PVD/TEFLON, 56C   Applications Chemical processing Electronics Pump cleaning solutions Printed circuit boards Pulp and paper   Suction Port Size:  2 in  Discharge Port Size:  1.5 in  Connection Types:  NPT, BSP, Flange, or Union  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  90 psi (6.2 bar)      @3450 RPM  @2900 RPM  Flow Range*:  4 to 116 gpm  0.9 to 26.8 m3/h  Maximum Head:  74 ft  23 m  Power Range**:  0.28 to 1.74 hp  0.37 to 1.38 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.    Type:  Sealless Mag Drive  Configuration:  Horizontal  Construction Materials:  Polypropylene or PVDF  O-ring Materials:  FKM, EPDM, Simriz®, or Kalrez®  Bushing Materials:  Carbon, PTFE, Ceramic, or SiC  Shaft Materials:  Ceramic, Hastelloy® C, or SiC      Polypropylene  PVDF  Maximum Temperature:  180º F (82º C)  220º F (104º C) Kalrez® is a registered trademark of DuPont Performance Elastomers Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK  Hastelloy® C is a registered trademark of Haynes International, Inc.

No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.   SHOP JOHNSON PUMP     The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.     Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.   SHOP THE Aqua Jet five chamber diaphragm pump     Specials    Closeouts    Remanufactured    Rebates  

Portable Washdown Pump Kit  Everything you need to power-wash your boat or RV in a convenient stow-and-go carrier.  This easy-to-use washing kit is built with a high-pressure diaphragm pump that is self-priming, can run dry without damage, and won't overheat.  Just connect to a garden hose or use the supplied input hose to draw water directly from the lake, ocean, or even a bucket and you are ready to wash.  Features: Smooth, quiet operation and flow Low power draw Easy, quick-connect fittings Technical Specifications: Flow Rate - 2 GPM Pressure - 100 PSI Carrier Dimensions (L x W x H) - 13.8" x 11.3" x 12.5" Voltage - 12 V In the Box:  Sealed pump in case Adjustable spray nozzle Input water hose with quick-connect fitting and filter - 6.6' (2 M) Spray hose with quick-connect fitting - 12.3' (3.75 M) Power cord - battery clips (for direct battery connection) and a DC power port adapter WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Non-Automatic The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 800/1100 GPH - Non-Automatic The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.