|
Float Switch
A bilge pump Float Switch designed for non-automatic bilge pumps. With a removable switch from the base, it allows for easy cleaning or replacement. This bilge pump float switch will provide exceptional satisfaction, long-lasting use, and extreme durability.
Features:
Marine grade tinned wire
Mercury-free
Easy to clean and maintain
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.73 |
|
|
Bilge Pump - 600 GPH - Non-Automatic
The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.45 |
|
|
Bilge Pump - 800/1100 GPH - Non-Automatic
The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.08 |
|
|
Bilge Pump - 800/1100 GPH - Automatic
The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump. This automatic, self-priming bilge pump is ideal for all watercraft. It is ignition protected, has a low power draw and can run dry without damage. Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.
This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.
Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.05 |
|
|
Angler 30-G3 Electric Anchor Winch with AutoDeploy
The TRAC Outdoors Angler 30-G3 Electric Anchor Winch with AutoDeploy allows you to raise and lower your anchor with easy-to-use buttons automatically. AutoDeploy works by simply pressing and releasing the down button. When the anchor reaches the bottom, the winch will shut off, holding the boat in place.
It has a maximum anchor capacity of 30 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands.
*Anchor not included
Technical Specifications:
Boat Size - Up to 22'
Anchor Capacity - 30 lb
Anchor Deployment - Power Down or AutoDeploy Down
Rope Speed Down - 70 FPM
Rope Speed Up - 65 FPM
Power - 12V
Dimensions (L x W x H) - 10" x 9.75" x 5.75"
In the Box:
Winch
Anchor roller
100' of 3/16" pre-wound double braid anchor rope
Sealed membrane UP/DOWN/AutoDeploy switch
Marine-grade battery wire - 17'
Assembly hardware and
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
227.83 |
|
|
Deckboat 40-G3 Electric Anchor Winch with AutoDeploy
The TRAC Outdoors Deckboat 40-G3 Electric Anchor Winch with AutoDeploy allows you to automatically raise and lower your anchor with easy-to-use buttons. AutoDeploy works by simply pressing and releasing the down button. When the anchor reaches the bottom, the winch will shut-off, holding the boat in place.
It has a maximum anchor capacity of 40 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands.
*Anchor not included
Technical Specifications:
Boat Size - Up to 26'
Anchor Capacity - 40 lb
Anchor Deployment - Power Down or AutoDeploy Down
Rope Speed Down - 70 FPM
Rope Speed Up - 65 FPM
Power - 12 V
Dimensions (L x W x H) - 19.5" x 9.75" x 5.75"
In the Box:
Winch w/integrated anchor roller
100' of 3/16" pre-wound double braid anchor rope
Sealed membrane UP/DOWN/AutoDeploy switch
Marine-grade battery wire - 17'
Assembly hardware and
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
256.33 |
|
|
Fisherman 25-G3 Electric Anchor Winch
The TRAC Outdoors Fisherman 25-G3 Electric Anchor Winch allows you to automatically raise and lower your anchor with easy-to-use buttons.
It has a maximum anchor capacity of 25 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands.
*Anchor not included
Technical Specifications:
Boat Size - Up to 20'
Anchor Capacity - 25 lb
Anchor Deployment - Power Down
Rope Speed - 70 FPM
Power - 12 V
Dimensions (L x W x H) - 9" x 9" x 6"
In the Box:
Winch
Anchor roller
100' of 3/16" pre-wound double braid anchor rope
Sealed membrane UP/DOWN switch
Marine-grade battery wire - 17'
Assembly hardware and
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
171.80 |
|
|
G3 Anchor Winch Wireless Remote - Auto Deploy
The TRAC Outdoors G3 Anchor Winch Wireless Remote allows you to wirelessly raise and lower your anchor. It provides remote control and push-button anchor winch operation.
Features:
Use the wireless remote anywhere in the boat
For use with the TRAC G3 Fisherman 25 (69002/T10108-G3) or Pontoon 35 (69003/T10109-G3)
|
27.98 |
|
|
Pontoon 35-G3 Electric Anchor Winch
The TRAC Outdoors Pontoon 35-G3 Electric Anchor Winch allows you to automatically raise and lower your anchor with easy-to-use buttons.
It has a maximum anchor capacity of 35 lb. and provides simple, smooth operation with excellent holding power. This winch features a high-efficiency, 12 V, all-steel gear motor that uses less battery power than other brands.
*Anchor not included
Technical Specifications:
Boat Size - Up to 24'
Anchor Capacity - 35 lb
Anchor Deployment - Power Down
Rope Speed - 70 FPM
Power - 12 V
Dimensions (L x W x H) - 18" x 9" x 6"
In the Box:
Winch w/integrated anchor roller
100' of 3/16" pre-wound double braid anchor rope
Sealed membrane UP/DOWN switch
Marine-grade battery wire - 17'
Assembly hardware and
Instruction manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
198.91 |
|
|
Bilge Pump - 600 GPH - Automatic
The TRAC 69310 Automatic Bilge Pump is a submersible 600 GPH pump. This automatic, self-priming bilge pump is ideal for all watercraft. It is ignition protected, has a low power draw and can run dry without damage. Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.
This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.
Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.
Features:
Cartridge style pump head
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.40 |
|
|
Little Giant Float Switch 599117
Little Giant RFSN-9 Float Switch
This Remote Float Switch is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps. Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps. Converts any manual pump to an automatic pump up through 1/2 HP or 1 HP 115 volt or 230 volt.
|
129.29 |
|
|
Float Switch
Part #: 4202-7
Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.
Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.
Features:
36" Wire
12V & 24V
CE Rated
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.55 |
|
|
Float Switch w/Cover
Part #: 4201-7
Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24" angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.
Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.
Features:
36" Wire
12V and 24V
CE Rated
Includes Cover
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.56 |
|
|
Standard Automatic Float Switch - 12/24 VDC
The SHURFLO series float switches provide the ultimate in reliability for your boat.
Features:
3' Tinned Wire Assembly
Non-Mercury
Remote or Direct Mounting
Ignition Protected
3 Year Warranty
|
36.73 |
|
|
Caged Automatic Float Switch - 12/24 VDC
The SHURFLO series float switches provide the ultimate in reliability for your boat.
Features:
3' Tinned Wire Assembly
Non-Mercury
Remote or Direct Mounting
Ignition Protected
3 Year Warranty
|
45.86 |
|