|
VDB4 4-Position Distribution Block with Cover
T-Spec designed their VDB4 distribution block to handle the high-current power distribution for four (4) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of four (4) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.
Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate lock technology
In the Box:
Distribution block with one (1) 1/0 set-screw input and four (4) 4 or 8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed on input and outputs)
Two 1/2" screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.53 |
|
|
VFDB4 MANL 4 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to four (4) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG into four (4) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and four (4) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.75 |
|
|
VDB2 2-Position Distribution Block with Cover
T-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of two (2) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.
Features:
One (1) 1/0 to 4 AWG into two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate lock technology
In the Box:
Distribution block with one (1) 1/0 set-screw input and two (2) 4 or 8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed on input and outputs)
Two 1/2" screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.84 |
|
|
VFDB2 MANL 2 Position Distribution Block with Cover
This compact distribution block from T-Spec will handle the high-current power distribution for your single source to two (2) smaller gauge power wires, ensuring that your wiring's connected securely, looking neat, and safely fused. T-spec's Universal Screw Design for securing the wires and mini ANL fuses to the block works with a variety of tools. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover keeps the fuses and connections clean.
Fuses sold separately.
Features:
One (1) 1/0 to 4 AWG in to two (2) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
One distribution block for mini-ANL fuses with one (1) 4 or 1/0 AWG set-screw input and two (2) 4/8 AWG set-screw outputs
Plastic cover (attached)
3 Rubber grommets and sleeves (pre-installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.03 |
|
|
VPNB2 MANL 2 Position All-In-One Distribution Block with Cover
T-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power sources, and protect them each with a mini-ANL fuse. This hefty little block distributes power from one (1) 1/0-gauge positive power cable to two (2) 4- to 8-gauge power leads, each routed through a mini-ANL fuse.
Then, the same block receives the amps' two ground wires and combines them for a single 1/0-gauge ground cable.
Fuses sold separately.
Features:
(2 positive) 1/0 to 4 AWG in to (2 positives) 4/8 AWG out
(1 negative) 1/0 to 4 AWG in to (2 negatives) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Distribution block for both power and ground
Plastic cover (attached)
2 Rubber grommets and sleeves on power inputs (installed)
2 Rubber grommets and sleeves on power outputs (installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.53 |
|
|
VPNB4 MANL 4 Position All-In-One Distribution Block with Cover
T-Spec designed VPNB4 distribution block to handle the high-current power and ground distribution for four (4) power sources, and protect them each with a mini-ANL fuse. This hefty little block distributes power from one (1) 1/0-gauge positive power cable to four (4) 4 to 8 gauge power leads, each routed through a mini-ANL fuse.
Then, the same block receives the amps' two ground wires and combines them for a single 1/0 to 4 gauge ground cable.
Fuses sold separately.
Features:
(2 positive) 1/0 to 4 AWG in to (4 positives) 4/8 AWG out
(1 negative) 1/0 to 4 AWG in to (4 negatives) 4/8 AWG out
TPE wrapped soft touch
Dual sizes gasket set
Water-resistant
Solid brass construction
Black nickel finish
T20 Torx® screws
Gate Lock technology
In the Box:
Distribution block for both power and ground
Plastic cover (attached)
3 Rubber grommets and sleeves on power inputs (installed)
2 Rubber grommets and sleeves on power outputs (installed)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.12 |
|
|
5028
ST Blade Fuse Block w/ Cover
6 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5029
ST Blade Fuse Block w/ Cover - 12 Circuit w/out Negative Bus
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.26 |
|
|
1-In 4-Out Fused Distribution Block
The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Fused style distribution block
(3) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(4) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 3.25 inches (7.62cm)
Height: 1.3125 inches (3.33 cm)
|
65.46 |
|
|
1-In 4-Out Ground Distribution Block
The Roswell 3-in 4-out distribution block is everything a boat's audio system needs. Roswell distribution blocks are machined out of nickel to provide rock-solid electrical connections and are protected by strong, injection-molded plastic covers. They are designed to accept both ANL and Mini ANL fuses for additional versatility and feature machined nickel inserts to accommodate multiple sizes of wire.
Features:
Ground-style distribution block
(3) 1/0 input with a 4 AWG reducer
High-impact plastic base and cover
(4) 4 AWG outputs with 8 AWG reducers
Dimensions:
Length: 4.00 inches (10.16 cm)
Width: 3.25 inches (7.62cm)
Height: 1.3125 inches (3.33 cm)
|
71.58 |
|
|
Standard 4 ATO Fuse Block with LED Indicators
The SD 4 ATO Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. Integrated LED blown fuse indicators allow for quick maintenance, preventing troubleshooting & equipment downtime. These products are RoHS compliant.
Features:
Carded blister packaging for simple retail display
LED blown fuse indicators
Snap-on insulating cover (included)
Centralizes wiring to a convenient location
The insulating cover provides circuitry protection
Continuous current rating of 100A
Current rating max per circuit: 30A Max
Applications:
Centralized distribution for accessory circuits
Ideal solution for DIY projects
*Fuses not included
|
17.45 |
|
|
ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus
Part# 5035
Can be used for 24-hour circuits
Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit identification
Fuse blocks with covers include 20 write-on circuit labels
Tin-plated copper buses and fuse clips
Accepts ring or spade type terminals
Accepts ATO® and ATC® fast acting blade fuses
Fuses sold separately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.36 |
|
|
5056100 - Water Resistant ST-Blade Fuse Block with Cover
This Blue Sea fuse block provides water-resistant circuit protection for ATO/ATC fuses and circuit breakers in a compact footprint. Now with wing screws for toolless access.
Features:
Water-resistant design with a standard ring or spade-type terminals
Allows for simple wiring with standard tools
Accepts a wide range of wire sizes
Includes 3 wire plugs to maintain a water-resistant rating if less than 4 loads are required
Accepts ATO and ATC fast acting blade fuses
Accepts ATO/ATC-Style Low Profile Circuit Breakers
Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire
5056100 meets ABYC/USCG insulation requirements
Tin-plated copper busses and fuse clips
Includes four write-on circuit labels
Spare fuse and fastener storage in cover
Wing screws designed for tool-free installation of cover to meet ABYC compliance
Technical Specifications:
Cover - yes
Maximum Voltage - 32V DC
Bus Material - Tin-plated Copper
Mounting Holes - Accepts 1/4" (6mm) screws
Terminal Screws - 4 x # 8-32 with captive star lock washer
Wire Size - Input - (1) 8 AWG to 4 AWG
Wire Size - Load - (4) 16 AWG to 10 AWG
In the Box:
5056100 Busbar
Instruction Manual
*Sold as an Individual
|
35.99 |
|
|
5005 ANL 35-300AMP Fuse Block with Cover
Features:
Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction
For use on systems up to 32V DC
Large 5/16" - 18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.32 |
|
|
5025 ST Blade Fuse Block with Cover - 6 Circuit with Negative Bus
Features:
Clear insulating cover with label recesses accept Small Format Labels
Cover Satisfies ABYC/USCG requirements for insulation
Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
Accepts ATO and ATC fast acting blade fuses
20 write-on circuit labels included
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.28 |
|