Bilge Pump - 800/1100 GPH - Automatic  The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 800/1100 GPH - Non-Automatic The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Non-Automatic The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bilge Pump - 600 GPH - Automatic  The TRAC 69310 Automatic Bilge Pump is a submersible 600 GPH pump.  This automatic, self-priming bilge pump is ideal for all watercraft.  It is ignition protected, has a low power draw and can run dry without damage.  Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.   This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.  Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps.  Screw mounting holes match Rule and Attwood Tsunami.   Features: Cartridge style pump head Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Automatic Flow Rate - 600 GPH Discharge Outlet - 3/4" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sahara MK2 S800 Bilge Pump 800 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Sahara MK2 S1200 Bilge Pump 1200 GPH - 24V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 4 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Cartridge Bilge Pump Low 1100GPH - 12V Submersible low bilge pump 12V with pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Features: Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation  Replaceable cartridge motor  Easy maintenance and low power consumption Specifications: Fixed 29 mm (1,15″) straight discharge port Amperage: 4A  Fuse Size: 5A  Length: For pleasure boats from 8m (25 Ft) to 10m (30 Ft)

Sahara MK2 S500 Bilge Pump 500 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sahara MK2 S1200 Bilge Pump 1200 GPH - 12V - Automatic Engineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Features: Sahara Mk2 is the only automatic bilge pump that eliminates air-locks  Patented X-Air™ Impeller ejects trapped air in the pump and pipework. Sahara Mk2 is the easiest automatic bilge pump to install and service  External mounting feet and integrated outlet reduces time and effort. Universal mounting pattern makes replacement simple. Service pump cartridge from hard-to-reach areas using only one hand. Sahara Mk2 is the most reliable automatic bilge pump in freshwater and saltwater applications  Attwood’s SteadySwitch™ reduces cycling and extends the life of the pump. 40% better protection against water ingress and electrolysis - vs. MK1. 2X better protection against water ingress and electrolysis - than the leading competition. Universal mounting patterns make it backwards compatible with the most popular bilge pumps on the market.

PWC 500 GPH Automatic Pump In the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. Rule has true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market. Features: Completely automatic with manual override; no float switch needed Submersible and ignition protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Bracket for Newer 360-1100 GPH Rule Pumps The Rule Side Mount Bracket is made specifically for newer 360-1100 GPH Rule Pumps.

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet