|
Macerator Pump - 12V
Designed specifically for sanitation waste and fish box evacuations, this high-powered pump incorporates a high quality motor with seamless motor tube and O-ring sealed motor end frames. High-speed rotary cutter shreds waste efficiently, producing a higher discharge capacity.
Design allows for direct replacement with other macerators for easy installation.
Features:
Heavy duty armature shaft seal
Manual turn key with rear O-ring seal
Innovative internal housing design
Seamless motor tube
Dual blade design
Premium impeller
Technical Specifications:
Flow Rate - 13 GPM (49.2 LPM)
Voltage - 12 V
Intake Hose - 1.5" (4 cm)
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.56 |
|
|
Bilge Pump - 600 GPH - Non-Automatic
The TRAC Outdoor 69300 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.45 |
|
|
Bilge Pump - 800/1100 GPH - Non-Automatic
The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft. With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.
The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
It is ignition protected, can run dry without damage and has a low power draw.
*Float switch not included
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.08 |
|
|
Submersible Thru-Hull Pump - 600 GPH
The TRAC 69320 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump ideal for all watercraft. Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.
This versatile thru-hull pump comes packaged with a 3/4" 600 GPH outlet. The outlet has an O-ring for easy maneuverability without stripping. It can run dry without damage and is designed to have a low-power draw.
The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
Features:
Runs dry without damage
Meets ABYC, NMMA, Coast Guard, and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate - 600 GPH
Discharge Outlet - 3/4"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.27 |
|
|
Submersible Thru-Hull Pump - 800/1100 GPH
The TRAC 69321 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump that's ideal for all watercraft. Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base.
This versatile thru-hull pump comes packaged with a 1-1/8" 1100 GPH outlet and a 3/4" 800 GPH outlet. Each outlet has an O-ring for easy maneuverability without stripping. It can run dry without damage and is designed to have a low-power draw.
The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps. The screw mounting holes match Rule and Attwood Tsunami pumps.
Features:
Runs dry without damage
Meets ABYC, NMMA, Coast Guard, and ISO marine standards
Technical Specifications:
Operation - Non-automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.72 |
|
|
Super-Duty Washdown Pump
Self-priming, 12V diaphragm pump with sealed, pressure switch control and vibration dampening polymer isolating mounting base. Washdown pumps are ideal for cleaning leisure boats, fish boxes, anchor chains, and dinghies. Suitable for fresh and saltwater.
Built for heavy-duty, on-board applications, this TRAC washdown pump has a 5.3 GPM flow rate and boasts 70 PSI. A professional-grade pump, this TRAC washdown pump can be used for both marine and RV applications.
Features:
Smooth, quiet operation and flow
Runs dry without damage
Seamless motor shell
Low power draw
Ignition protection
Easy, quick-connect fittings
Technical Specifications:
Flow Rate - 5.3 GPM
Pressure - 70 PSI
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
128.56 |
|
|
Macerator Pump - 12v w/Barb Adapter
Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry.
Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested.
Features:
All stainless steel bolts to avoid corrosion problems
Spring loaded Viton shaft seal is used to prevent premature leaks
Proprietary rubber impeller compound allows longer dry running time
Specifications:
Pump: Self priming Flexible rubber impeller with stainless steel wearplate
Impeller: Raritan Proprietary Nitrile compound
Blade: Stainless steel double cut
Seal: Viton Lip with 316 SS spring and case
Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing
Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male
Outlet: 3/4" MNPT
Lead wires: 14 GA, Red and black
Weight: 5 lbs.
Approvals: Ignition protected, ISO 8846
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
276.92 |
|
|
Macerator Pump - 12v w/Barb Adapter
Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry.
Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested.
Features:
All stainless steel bolts to avoid corrosion problems
Spring loaded Viton shaft seal is used to prevent premature leaks
Proprietary rubber impeller compound allows longer dry running time
Specifications:
Pump: Self priming Flexible rubber impeller with stainless steel wearplate
Impeller: Raritan Proprietary Nitrile compound
Blade: Stainless steel double cut
Seal: Viton Lip with 316 SS spring and case
Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing
Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male
Outlet: 3/4" MNPT
Lead wires: 14 GA, Red and black
Weight: 5 lbs.
Approvals: Ignition protected, ISO 8846
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
275.56 |
|
|
Bilge Pump - 800/1100 GPH - Automatic
The TRAC 69311 Automatic Bilge Pump is a submersible 600 GPH pump. This automatic, self-priming bilge pump is ideal for all watercraft. It is ignition protected, has a low power draw and can run dry without damage. Designed for easy installation and retrofitting, the bilge pump has a cartridge-style pump head and universal strainer base.
This automatic bilge pump has an integrated float switch that allows for automatic ON/OFF functionality.
Universal strainer base is connection-compatible to fit Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami.
Features:
Cartridge style pump head
Pump body accepts both 3/4” and 1-1/8” screw-on outlets. Each outlet has an O-ring for easy maneuverability without stripping
Strainer base also includes side mounting option for tight spaces
Runs dry without damage
Meets ABYC, NMMA, Coast Guard and ISO marine standards
Technical Specifications:
Operation - Automatic
Flow Rate (3/4" outlet) - 800 GPH
Flow Rate (1-1/8" outlet) - 1100 GPH
Discharge Outlet - 3/4" and 1-1/8"
Voltage - 12 V
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.05 |
|
|
Jabsco 18590-0010 Pump 12V Macerator 1" ID Hose Barb
Pump Body: Plastic Self-Priming Flexible Impeller with Stainless Steel Wearplate.
Port Size: Inlet – 3" Slip-on Hose
Outlet: 1" ID Hose Barb
Flow: 13 GPM at 5 feet of head
Impeller: Nitrile
Shaft Seal: Lip Type
Shaft: Stainless Steel
Motor: 12 Vdc Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft.
Macerator: Cast Bronze Cutter reduces particle size to 1/8" maximum.
The Jabsco 18590-series DC macerator pump unit is the ideal solution for emptying holding tanks on recreational vehicles and avoiding dump stations. The macerator section grinds waste down to a particle size of 1/8" maximum so it can easily be pumped through a 1" ID discharge hose. The pump section is self-priming, permitting the unit to be mounted above the tank in a convenient location. Empties most recirculating toilets in less than 2 minutes; empties a typical 30 gallon holding tank in less than 3 minutes.
|
395.99 |
|
|
Macerator Pump TA3P10-19, 12v
The Johnson Pump brand TA3P10-19 Macerator pump takes care of the toilet/livewell waste, shredding it before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.
Features:
Ignition protected motor, conforming with ISO 8846 Marine
Mounting bracket for easy replacement
Extremely energy efficient
Rotary cutter casing of PET (thermoplastic polyester)
Directly connected to sewage line or holding tank
Capacity at 0.2 bar (6.7 ft):37 l/min - 10 GPM
Inlet Connection:11/2" (dia 38 mm) hose or 11/2"NPT
Amperage: 15 A
Fuse Size: 20 A
Outlet Connection: 1" (25.4 mm) hose
Motor: 12V DC (with built-in thermal protection)
Pump Body: Phenol Plastic (PF)
Impeller: Nitrile
Cutter Casing: Thermoplastic Polyester (PET)
Shaft: Stainless Steel
Seal: Lip Seal
Length: 230 mm - 9.06"
Width: 108 mm - 4.25"
Height: 82 mm - 3.23"
Weight: 1.9 kg - 4.2 lbs
*CE-Approved
|
136.30 |
|
|
12 Gallon (47L) Waste Water Tank CPL Macerator - 12V
Complete waste water tank kit with pump ready to install.
Including a 47L (12.5 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level control.
Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation.
Specifications:
Weight: 24 kg/52 Lb
Dimensions: 480/19L x 330/13H x 400/15.75W mmin
Type: Black water
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
531.78 |
|
|
19 Gallon (72L) Waste Water Tank CPL Macerator - 12V
Complete waste water tank kit with pump ready to install.
Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level control.
Linear low density polyethylene is the best suited material for holding tanks because of resistance to corrosion and odor permeation.
Specifications:
Weight: 25 kg/55 Lb
Dimensions: 700/27.5L x 300/11.8H x 400/15.75W mm/in
Type: Black water
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
559.96 |
|
|
Gulper Grouper Fishbox Evacuation Pump 24V
Non clog no filter waste pumps built on more than a decade of market leading pump technology.
Replace your macerator with the ultimate fishbox waste pump - Gulper Grouper - the non choke fishbox waste box suits standard 1"/ 1 1/2" hose connections
Features
You can depend on diaphragm pump technology : No impeller to clog or burn
Non-choke valves - easily handle fishbox waste
Save money - Single pump for multiple wells
Easy to install - 360 degree head rotation and choice of 1" or 1 1/2" hose connections to suit your installaton needs
Easy to maintain and clean
Ideal replacement for macerator pumps
Fast pump out - up to 6.75 US gals/ 25.5 ltrs per minute
Long term durability - runs dry without damage
Fit in convenient locations - Multi-directional head position
Save battery - Low power consumption
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
241.54 |
|
|
Waste Water 43L (11.5 GPM) - 12V
Macerator Pump 12V equipped with rotary cutter and impeller to discharge waste water with high capacity.
Capacity 43 L/min (11,5 GMP) output at 4m total head. Self priming up to 3m vertical lift.
Brass and stainless steel internal parts and pump body in thermo polymer with a long lasting impeller. Inlet port 38mm (1,5″) and outlet 25mm (1″). 12A fuse. Interchangeable with Jabsco 18590-2092, Johnson Pump 10-24453-04.
Specifications:
Weight: 1.98 kg/4 lbs
Dimensions: 240/9.4L x 90/3.5H x 130/5W mm/in
Type: Black Water
*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
109.18 |
|