Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha Outboards Provides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using engine.  Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces outboard flushing port plug O-ring seal closes off port when operating engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficult turning of hose into port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick Flush Kit for OMC Outboards Provides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using engine.  Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces outboard flushing port plug O-ring seal closes off port when operating engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficult turning of hose into port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WP018 Water Pump Repair Kit for Mercury Outboard Engines This water pump repair kit is designed for specific Mercury outboard engines. Fits: Mercury 9.9 hp 4-stroke outboards Replaces: MERCURY Water Pump Repair Kit 46-99157T2 MERCURY Water Pump Repair Kit 99157A2 MERCURY Water Pump Repair Kit 85098A2 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.

T-H Marine Supplies T-H Marine produces thousands of products in many categories, including outboard motor mounts, outboard tilt and trim, access hatches, deck plates, lid locks, deck hardware, livewell aeration, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories, trolling motor accessories, pontoon boat parts, and general boat accessories.

Motor Stik OutBoard Motor Support Stick - Pair Features: Fits Over Trim Rams Supports Your Outboard While Trailering Takes the Pressure Off of Hydraulic System Most Outboards 150hp and Up Strong Aluminum Tubing with Molded Ends Safe for Salt or Fresh Water Note: Some Yamaha motors have a grease fitting on the port side ram. Use a single Motor Stik™ on the starboard side only in this application. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Original Equipment Quality Replacement Tilt Trim Motor for Mercury/Mariner Outboards with Design II 3 RAM Replacement outboard tilt trim motor that will fit Mercury/Mariner outboards w/Design II 3 ram, three-wire trim units, Hollow-hex shaft W/AFT FILL RESERVOIR, 3-wire connection, 2-bolt mount, Shaft adaptor, and O-ring included, Ring Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: MERCURY Tilt Trim Motor 811628 MERCURY Tilt Trim Motor 828708A1 MERCURY Tilt Trim Motor 878265A6 SIERRA Tilt Trim Motor 18-6774 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WP019 Water Pump Repair Kit for Yamaha Outboard Engines This water pump repair kit is designed for specific Yamaha outboard engines. Fits Yamaha 150HP 1999 and up, 175HP 1992 - 2001, 200HP 1992 and up, 225HP 2000 and up, 300HP 2003 and up. Replaces: YAMAHA Water Pump Repair Kit 61A-W0078-A3-00 YAMAHA Water Pump Repair Kit 61A-W0078-A4-00 YAMAHA Water Pump Repair Kit 61A-W0078-A2-00 YAMAHA Water Pump Repair Kit 65L-W0078-A0-00 SIERRA Water Pump Repair Kit 18-3396-1 SIERRA Water Pump Repair Kit 18-3396 EMP Water Pump Repair Kit 46-02346 EMP Water Pump Repair Kit 46-46202 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.

Steer Stop Outboard Hydraulic Steering Lock Set - 4" T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.  With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal. Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands. Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

El Outboard Steering Kit for Up To 150HP Motors 401 Manual Helm with Fitting Kit The heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are standard. The light, smooth steering must be experienced to be appreciated. Designed as a complete Do It Yourself installation, everything you need is supplied including detailed instructions. You don’t even have to know anything about hydraulics! The Admiral Series 401 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world leader in hydraulic boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits. Features: Front-mount design for maximum appeal Improved internal efficiency Brass wheel nut and washer Stainless steel steering wheel shaft - not aluminum Anti-splash filler cap for rough conditions Unique assembly design for ease of service and maximum performance Stainless steel studs, nuts, and washer pre-fitted for convenience Highly efficient non-return valves for non-feedback of helm unit - eliminates all torque from the steering cylinder Ultra 15 Oil Quantity 2 - 1 Liter Bottles Features: For use in HyDrive Skipper and Admiral Series Hydraulic steering systems only Not for use in HyDrive 2000 Series Steering Systems This oil is compatible with HyDrive HF15, but should not be mixed with any other fluids N-8 - 49' Nylon Tube 3/8" Features: Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit) Use with HP Compression Olive and Nut Fittings Supplied in HY EL O/B KIT Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

Sierra fuel pump kits for Mercury/Mariner outboards.

Verado Autopilot Fitting Kit for MK2 Pumps Verado steering system autopilot fitting kit for MKII Pumps 1, 2, 3, 4 & 5. Fitted with Verado O-Ring Face Seal fittings use don Verado steering systems.  Fitted hose kit designed for simplified Verado Autopilot installations, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts. Kit Contains: 3 x Hose ¼” 3000 PSI max, 915 mm (36"), 9/16” UNF to 9/16” ORFS 2 x Hoses ¼” 3000 PSI max, 380mm (15”),  9/16” ORFS to 9/16” ORFS 1 x Return Hose 3/8” 2250 PSI max, 390mm (15.4”),11/16” ORFS to 11/16” ORFS 2 x T Connectors: Stainless: 9/16” ORFS 1 x T Connector: Brass: 11/16” ORFS > 11/16” ORFS > 9/16” ORFS

Verado Autopilot Fitting Kit for Mk2 Pumps with SteadySteer Switch Fitted hose kit designed for simplified SteadySteer installation into Verado steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts. SteadySteer Benefits: Control the autopilot using the helm – enhanced usability Steer manually through turns - a convenient manual override Hassle-free Autopilot reengagement - reengages automatically on straight legs Seamless and intuitive boat control Increased convenience without sacrificing safety with SteadySteer – a functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established – no key-presses required. Navigate safely with SteadySteer, a functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established. Control the Autopilot with the Helm SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading.  No key-presses, no alarms – just turn the helm. Fewer Distractions – Just Drive No need to look at a display or push buttons to change course, merely point the bow to your destination. Kit Contains: 3 x Hoses (Black): 2800 PSI max, 915 mm (36") 9/16-18 ORFS to 9/16 UNF 2 x Hoses  (Black): 2800 PSI max, 370 mm (14.5") 9/16-18 ORFS to 9/16-24 ORFS 1 x Hose (Black): 2800 PSI max, 830 mm (32.7") 9/16-18 ORFS (O Ring Face Seal) to 9/16-18 ORFS 1 x Hose, return (Black): 2250 PSI max, 830 mm (32.7") 11/16-16 ORFS to 11/16-16 ORFS 2 x T Connectors: Stainless: 9/16-18 ORFS 1 x T Connector: Brass: 11/16-16 < 9/16-18 > 11/16-16 ORFS 1 x Steady Steer Flow Switch 2 x Adaptor, Straight: 1/4 NPT to 9/16 24 M UNF

Premium Replacement Tilt Trim Sender for Mercury This tilt trim sender fits MC-I, R, MR, Alpha, Alpha Gen II, and Bravo drives. Replaces: MERCURY Tilt Trim Sender 805320A03 MERCURY Tilt Trim Sender 805320A1 MERCURY Tilt Trim Sender 17693A2 MERCURY Tilt Trim Sender 96863A15 MERCURY Tilt Trim Sender 63115A12 MERCURY Tilt Trim Sender 88678A4 MERCURY Tilt Trim Sender 88678A5 SIERRA Tilt Trim Sender 18-7633 *ARCO Assurance 12-month part and labor warranty protection   This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Solenoid for Mercury - Isolated Base, 12V Replacement solenoid that will fit Mercury. Isolated base, 12 Volt. Replaces: MERCURY 87-61053 MERCURY 89-15857 MERCURY 89-68258 MERCURY 89-68258A4 MERCURY 89-76545 MERCURY 89-76545T MERCURY 89-853654A1 SIERRA 18-5815 *ARCO Assurance 12-month part and labor warranty protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WP006 Water Pump Repair Kit for Suzuki Outboard Engines This water pump repair kit is designed for specific Suzuki outboard engines. Fits: Suzuki DF 90/115/140 (2001-06) Outboard Engines Replaces: SUZUKI Water Pump Repair Kit 17400-90J20 SUZUKI Water Pump Repair Kit 17400-90J11 SUZUKI Water Pump Repair Kit 17400-90J10 SUZUKI Water Pump Repair Kit 17400-90J01 SUZUKI Water Pump Repair Kit 17400-90J00 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 5033541 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 0778241 JOHNSON / EVINRUDE OMC Water Pump Repair Kit 5033541 SIERRA Water Pump Repair Kit 18-3258 Warranty Information When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.