|
16" x 24" Deluxe Sewn 50 Star Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
26.95 |
|
|
12" x 18" Deluxe Sewn 50 Star Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
23.39 |
|
|
16" x 24" Deluxe Sewn US Yacht Ensign Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
26.24 |
|
|
12" x 18" Deluxe Sewn US Yacht Ensign Flag
These deluxe sewn flags are constructed from lightweight yet durable fade resistant polyester fabric, which make them the perfect all-weather flags.
Features:
Individually Sewn Stripes
Embroidered Stars
Brass Grommets
Four-Needle Flyend
|
19.85 |
|
|
Pontoon 30" Flag Pole Mount & 16" x 24" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 30" comes complete with a 16" x 24" sewn U.S. Flag.
|
67.16 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -24V - Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15063-002 (Super Strong 24-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 24-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1698.67 |
|
|
16" x 24" Super Strong Trim Tab Kit w/o Switch -12V -Dual Actuator
Lenco Electric Super Strong Trim Tab Kits were designed for sport-fishing boats, high speed cruising boats and large commercial vessels. 7 Gauge flat - 304 SS blades with all stainless steel mounting hardware withstand the rigors of the most demanding conditions. No spray or mist when mounted in recessed pockets. 3/8" diameter hinge pin and 3.75" sacrificial anode. All Super Strong Trim Tab Systems have Vandar Upper Mounting Brackets with Gland Seal and 10 gauge SS lower mounting brackets with 3/8" SS bolts
Actuator Part # 15056-002 (Super Strong 12-Volt Trim Tab Kit)
Specifications:
Suggested Boat Length: 35' to 50'
Length of Tab: 16"
Width of Tab: 24"
Blades: 7 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1696.13 |
|
|
Flexible Vinyl Black Rub Rail 1-1/16" x 1-7/8" 50'L
Features:
Tight-radius bending can be made with minimal heating
Easy handling making these rub rails a good choice for do-it-yourself boaters
Accepts flexible vinyl insert V12-0003 (sold separately)
Endcap F90-0001 required.
Made in the USA
5-year limited warranty
|
369.26 |
|
|
AnchorShade® III - White
Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come!
This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach.
Features:
Adjustable pole locks in place up to 8 feet
Lightweight, mildew/fade resistant UV-treated nylon top
Excellent sun protection. Blocks out 85-90% of harmful rays
Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications
"Market Style" top allows venting to occur without loss of sun protection
Comes complete with its own heavy duty carrying case with shoulder strap
|
166.00 |
|
|
AnchorShade® III - Blue
Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come!
This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach.
Features:
Adjustable pole locks in place up to 8 feet
Lightweight, mildew/fade resistant UV-treated nylon top
Excellent sun protection. Blocks out 85-90% of harmful rays
Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications
"Market Style" top allows venting to occur without loss of sun protection
Comes complete with its own heavy duty carrying case with shoulder strap
|
166.00 |
|
|
AnchorShade® III - Sand
Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come!
This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach.
Features:
Adjustable pole locks in place up to 8 feet
Lightweight, mildew/fade resistant UV-treated nylon top
Excellent sun protection. Blocks out 85-90% of harmful rays
Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications
"Market Style" top allows venting to occur without loss of sun protection
Comes complete with its own heavy duty carrying case with shoulder strap
|
166.00 |
|
|
Pontoon 24" Flag Pole Mount & 12" x 18" US Flag
Developed with the Pontoon Boater in mind, this injection molded, black nylon mount attaches easily to the top of your pontoon railing and features a 10° presentation angle. The 3/4" diameter bright dipped anodized aluminum pole simply snaps into the base and features color matched Charlevoix flag clips.
The 24" model includes a 12" x 18" sewn U.S. Flag.
|
53.40 |
|
|
Teak Flag Pole - 1" x 24"
Boaters appreciate teak's traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica (sand) make it impervious to insects and wood rot. To maintain the lasting beauty of teak, it should be cleaned using a good teak cleaner and oiled periodically with a quality teak oil.
Features:
Made from the finest grade A, kiln-dried teakwood
No deteriorating or warping
|
22.19 |
|
|
12" x 18" Jolly Roger Novelty Flag
Novelty Design Flags
All novelty flags measure 12" x 18" with 2-sided screen printed graphics and brass grommets.
|
11.99 |
|
|
12" x 18" Blue Marlin Flag
Fisherman's Catch Flags
All Flags Measure 12" x 18" with brass grommets.
|
13.32 |
|