|
Gunnel Mount Outrigger Holders - Cast 316 S.S. - 1-1/8" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
197.27 |
|
|
Gunnel Mount Outrigger Holders - Cast 316 S.S. - 1-1/2" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
347.27 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
187.49 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/2" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
334.24 |
|
|
Gunnel Mount Outrigger Holder - Fabricated 304 S.S. - 1-1/8" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
104.33 |
|
|
Side Mount Outrigger Holders - Fabricated 304 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
114.12 |
|
|
Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cast Base
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.
|
50.53 |
|
|
Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cut Base
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.
|
40.74 |
|
|
Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cast Base
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.
|
101.08 |
|
|
TigerShark I LineRigger® Electric Top Mount Outrigger Holders f/1-1/2" Poles - Pair
Designed for Hard or Soft T-Tops
Finally the first top mount outrigger holder that is electronically operational right at your console. This is a one-man operation to deploy, raise, lower and retrieve your outriggers with a simple push of a switch. Crafted of marine aluminum, highly polished and Anodized for years of service.
Package included 2 - 12' wire harnesses and one dual rocker switch panel
Features:
The simplicity of pressing a switch and you're fishing!
The TigerShark I LineRigger® is the first electronically operated top mount outrigger holder offered in the market
Meticulous engineering provides exact electronic deployment of your outriggers from your console
The powerful 12V motor drive allows for the total deployment and/or adjustment by simply pressing the switch up for deploying or pressing the switch down for retrieval of your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Mounting Plate Size: 4" W x 6" L
Includes 12' of wire from each holder
Units are supplied with a standard dual rocker switch panel
When activated simultaneously, it raises and deploys your outriggers to the fishing position
Convenience, craftsmanship, quality and performance will make the TigerShark a top selection for the sports-fisherman
|
2186.95 |
|
|
Gunnel Mount Outrigger Holders
Size: 2.0"
Dimensions: 4 x 6 1/2
Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
872.30 |
|
|
TigerShark III LineRigger® Manual Top Mount Outrigger Holder f/1-1/2" Poles-Pair
For Hard or Soft Tops
This TigerShark series features the lowest profile under your top. Simply push the handle up to release the gears and turn 14 to 17 times for complete deployment of your outriggers to maximum bait spread. Then, simply pull the handle down and lock into place. Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers. A simple turn of the handle does it all- total deployment and total position adjustment.
Features:
Bottom mounted crank assembly for ease of deployment
Simply push up on the handle to release the gears and turn 14 to 17 times to complete deployment of your outriggers, then simply pull handle down to lock into place
Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Fits Hard tops up to 2 1/2" thick
Allowing for the lowest profile under your t-top or hard top of any top mount outrigger holder in the industry
|
1889.95 |
|
|
Gunnel Mount Outrigger Holders
OH2016S
Size: 1.75"
Dimensions: 3 1/2 x 6
Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
826.62 |
|
|
Economy Stainless Steel Gunnel Mount Rod Holder- 0°
Features:
316 Stainless Steel
Black Liner
9” w/ Oval Cast Flange Top
Pin Base
|
34.24 |
|
|
Economy Stainless Steel Gunnel Mount Rod Holder- 15°
Features:
316 Stainless Steel
Black Liner
9” w/ Oval Cast Flange Top
Pin Base
|
34.24 |
|