Rod/Outrigger Holder - 1-5/8" x 16" x 1-1/2"- Pair Put absolutely no more holes in your T-Top or the gunnel of your boat. Simply place into your existing heavy duty cast stainless rod holder when outriggers are needed. When outriggers are not in use, simply remove holders and your existing cast rod holder is usable again.

9" Swivel Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl insert included to protect your rod

9" Side Mount Rod Holder - 1-5/8" I.D. 316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practical Can be mounted on any vertical flat surface White vinyl insert included to protect your rod

Stainless Steel Clamshell Ventilator 1-5/8" x 1-1/2" Features: Polished Stainless Steel 1-5/8" x 1-1/2" Screw Size: 4

Center Rigger Holder - 1-5/16" IPS Pipe - 1-1/8" Holder Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. Fits 1" Pipe Size.

Outrigger Holder Reducer - 1-5/8" to 1-1/2" - Pair Downsize your outrigger holders Reduce from 1-5/8" to 1-1/2"

Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cast Base Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.

Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cut Base Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.

Replacement Tube f/Outrigger Holders - 1-1/8" I.D Cast Base Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy.

MX8000CR Adjustable Angle holders MX8000CR (1-5/8" ID) are our strongest and most versatile holders. The three-point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18". Recommended poles for MX8000CR MX8719CR - 19 ft MX Step- Tube Style MX8716CX - 16 ft MX Step- Tube Style - Single Spreader MX8719CX - 19 ft MX Step- Tube Style - Single Spreader MX8720CX - 20 ft MX Step- Tube Style - Double Spreader MX8722CX - 22 ft MX Step- Tube Style - Single Spreader or Double Spreader

15' Fixed Carbon Fiber Outrigger Poles 1.5" 15' Carbon Fiber Top Gun Outrigger Poles - Fixed Length. Rupp's Fixed Length 15' Carbon Fiber Top Gun Outrigger Poles give you the strength and weight savings only carbon fiber can provide, at the most competitive prices. Constructed in three pieces for easy shipping and serviceability. Bright anodized aluminum collars! Ultra-light! These poles ARE NOT telescoping, see part number A0-1500-CFT for telescoping version. O.D of outrigger base tube is 1.50",designed to fit perfectly into Rupp outrigger bases. If other than Rupp, please specify the outrigger base manufacturer so we can ensure a perfect fit.

15' Telescopic Carbon Fiber Outrigger Poles 1.5" Carbon Fiber Telescoping Outrigger Pole Rupp's 15 foot Carbon Fiber telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping Carbon FIber poles an obvious choice. These poles are an ideal match for any of our Top Gun outrigger bases. Every part of these poles are fully serviceable and easily replaceable. Each pole weighs under 5 pounds! O.D of outrigger base tube is 1.50",designed to fit perfectly into Rupp outrigger bases. If other than Rupp, please specify the outrigger base manufacturer so we can ensure a perfect fit. Collapsed length is 7 feet.

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double Braided Nylon Dock Line - 5/8" x 35' - Black Features:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point