|
Top Mount 7° Adjustable Wedges-Pair
Angular adjusting wedges to straighten the top mount in installation allow for less stress on the top and smoother deployment of your outriggers.
|
53.80 |
|
|
Top Mount 11° Adjustable Wedges-Pair
Angular adjusting wedges to straighten the top mount in installation allow for less stress on the top and smoother deployment of your outriggers.
|
53.80 |
|
|
Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair)
Simple, strong and perfect for boats 24' and under, our Grand Slam 170 Outrigger Mounts are the ideal addition to make your boat into an offshore fishing machine. Their easy installation and attractive appearance will make your days on the water more productive.
Features:
Compatible with 1-1/8" Tele-Outrigger Poles
Adds up to 30-feet of fishing spread
Stainless-steel and Anodized Aluminum construction
Sure-Grip knob allows lift adjustments every 18°
Locking lever secures out-bound rotation to desired location
Delrin bearings allow for smooth, secure operation
Easy installation with the outrigger-ready mounting plates
Sold in pairs
3-year limited warranty
|
963.04 |
|
|
XD Top Mount
For use on sport fishing boats up to 40 feet.
Features:
Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick
Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using adapter
Fits Tigress and other industry standard 4” x 6” mounting plates (four 5/16” diameter fasteners)
Extreme-duty 316 Stainless Steel and anodized aluminum and sealed construction with UV protection
24 adjustable/locking system positions (15° increments) featuring Tigress XD 316 Stainless Steel design
19 upper-arm angle/locking positions (10° increments) using Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops
Tigress XD 316 Stainless Steel detent design with ambidextrous horizontal stops
Large 3-lobe UV ergonomic knob with integral detent feature when changing outrigger elevation
Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops.
User friendly underside lever actuation, with 8 optional indexable set-up positions
Standard ¼” diameter locking stainless steel push-in-pin for outriggers
Fits through all standard 3” diameter mounting plates and hard top holes
Sold as pair
3-Year Limited Warranty
|
1305.96 |
|
|
XD Crank Top Mount
Features:
For use on sport fishing boats up to 50 feet
Adjustable Upper Arm with ‘Run’ & ‘Laydown’ position Stops
User-friendly Folding Crank Handle with Integrated Drive Brake
Upper-Arm adjusting Ball-bearing drive system, with Integrated Balance Spring-assist
Extreme Duty Top Plate, Upper Arm, and Housings for Outriggers up to 22ft in length
Stainless-Steel & Bronze bushed Head pivot for Maximum trolling strength & durability
Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick
Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using an adapter
Fits Tigress and other industry-standard 4” x 6” mounting plates (four 5/16” diameter fasteners)
Extreme-duty 316L Stainless Steel and anodized aluminum and sealed construction with UV protection
24 adjustable/locking system positions featuring Tigress XD 316L Stainless Steel design
Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops
User-friendly underside lever actuation, with 8 optional indexable set-up positions
Fits through all standard 3” diameter mounting plates and hardtop holes
Sold as pair
3-Year Limited Warranty
|
2225.53 |
|
|
TigerShark III LineRigger® Manual Top Mount Outrigger Holder f/1-1/2" Poles-Pair
For Hard or Soft Tops
This TigerShark series features the lowest profile under your top. Simply push the handle up to release the gears and turn 14 to 17 times for complete deployment of your outriggers to maximum bait spread. Then, simply pull the handle down and lock into place. Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers. A simple turn of the handle does it all- total deployment and total position adjustment.
Features:
Bottom mounted crank assembly for ease of deployment
Simply push up on the handle to release the gears and turn 14 to 17 times to complete deployment of your outriggers, then simply pull handle down to lock into place
Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Fits Hard tops up to 2 1/2" thick
Allowing for the lowest profile under your t-top or hard top of any top mount outrigger holder in the industry
|
1889.95 |
|
|
TigerShark I LineRigger® Electric Top Mount Outrigger Holders f/1-1/2" Poles - Pair
Designed for Hard or Soft T-Tops
Finally the first top mount outrigger holder that is electronically operational right at your console. This is a one-man operation to deploy, raise, lower and retrieve your outriggers with a simple push of a switch. Crafted of marine aluminum, highly polished and Anodized for years of service.
Package included 2 - 12' wire harnesses and one dual rocker switch panel
Features:
The simplicity of pressing a switch and you're fishing!
The TigerShark I LineRigger® is the first electronically operated top mount outrigger holder offered in the market
Meticulous engineering provides exact electronic deployment of your outriggers from your console
The powerful 12V motor drive allows for the total deployment and/or adjustment by simply pressing the switch up for deploying or pressing the switch down for retrieval of your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Mounting Plate Size: 4" W x 6" L
Includes 12' of wire from each holder
Units are supplied with a standard dual rocker switch panel
When activated simultaneously, it raises and deploys your outriggers to the fishing position
Convenience, craftsmanship, quality and performance will make the TigerShark a top selection for the sports-fisherman
|
2186.95 |
|
|
XD Bay Series Top Mount
Features:
For use on sport fishing boats up to 40 feet
Accepts all Tigress XD 1-1/8” butt diameter Outriggers
19 upper-arm angle/locking (@10 deg.) using Tigress XD 316L Stainless Steel tooth locking design with horizontal stops for Trailering and bridges
Large 3-lobe UV ergonomic knob for changing and locking the outriggers’ elevation
24 adjustable/locking system positions (15-degree increments) featuring Tigress XD 316L Stainless Steel locking design with HD Spring return
User-friendly Side Operating Lever
Large ‘XD’ Aluminum 14.5mm thick baseplate with four corner mounting
5/16” through x 3.000” x 5.000” 4-bolt pattern
Fits Tigress and other industry-standard 4” x 6” mounting plates (four 5/16” diameter fasteners)
Extreme-duty 316L Stainless Steel and anodized aluminum and fully sealed construction with UV protection
Ambidextrous mounting option to accommodate the side that the tri-lobe knob is positioned on
3-Year Limited Warranty
|
660.31 |
|
|
XD 3k Carbon Fiber Telescoping Outrigger Poles - 18 feet - Matte Black/ Black - Pair
Features:
For use on sport fishing boats up to 40 feet
Patented Tigress Track Internal Tracking System
3K carbon fiber woven finish
Retracts to under 6' for trailering, bridges, and storage
316 Stainless Steel polished eyelets
Redesigned rings and tips
Lightest telescoping outrigger in the industry
UVI thermoplastic butt sleeves to fit in all Tigress top mounts
Includes a handy, heavy duty mesh storage bag
1- year limited warranty
Sold as pair
|
1649.99 |
|
|
XD 3k Carbon Fiber Telescoping Outrigger Poles - 18 feet - Matte Black/ Silver - Pair
Features:
For use on sport fishing boats up to 40 feet
Patented Tigress Track Internal Tracking System
3K carbon fiber woven finish
Retracts to under 6' for trailering, bridges, and storage
316 Stainless Steel polished eyelets
Redesigned rings and tips
Lightest telescoping outrigger in the industry
UVI thermoplastic butt sleeves to fit in all Tigress top mounts
Includes a handy, heavy duty mesh storage bag
1- year limited warranty
Sold as pair
|
1558.68 |
|
|
XD 3K Carbon Fiber Telescoping Outrigger Poles - 21' - Matte Black/ Black - Pair
Features:
For use on sport fishing boats up to 40 feet
Patented Tigress Track Internal Tracking System
3K carbon fiber woven finish
Retracts to under 6' for trailering, bridges, and storage
316 Stainless Steel polished eyelets
Redesigned rings and tips
Lightest telescoping outrigger in the industry
UVI thermoplastic butt sleeves to fit in all Tigress top mounts
Includes a handy, heavy duty mesh storage bag
1- year limited warranty
Sold as pair
|
2171.26 |
|
|
XD 3K Carbon Fiber Telescoping Outrigger Poles - 21' - Matte Black/ Silver - Pair
Features:
For use on sport fishing boats up to 40 feet
Patented Tigress Track Internal Tracking System
3K carbon fiber woven finish
Retracts to under 6' for trailering, bridges, and storage
316 Stainless Steel polished eyelets
Redesigned rings and tips
Lightest telescoping outrigger in the industry
UVI thermoplastic butt sleeves to fit in all Tigress top mounts
Includes a handy, heavy duty mesh storage bag
1- year limited warranty
Sold as pair
|
2171.26 |
|
|
SC50 Adjustable Wedge for Satcom Mounts
Designed to work with Scanstrut satcom mounts, you can quickly and easily provide a level mounting surface on any boat.
Satcom antennas require a horizontal mounting surface to function correctly. Finding this on any powerboat is often difficult. This satcom wedge, eradicates this problem by providing a level mounting surface on slopes from 0° to 12°.
Compatible with:
SC35, SC45, SC45R and SC65 satcom mount
Features:
Ingenious yet simple – simply counter-rotate the angled discs until the top surface is horizontal
A channel system inside the discs allows un-restricted positioning of the antenna mounting bolts
4 pairs of 6° angled washers provide a level fastening surface for the antenna mounting bolts
Watertight base seals fitted
Technical Specifications:
Material - Marine grade polymer
In the Box:
Counter-rotating angled discs 0° to 12° x 2
6° angled washers x 4
Mount seal
Instruction manual
*Sold as an Individual
|
249.54 |
|
|
XD Center Rigger Top Mount
For use on sport fishing boats up to 40 feet.
Features:
Accepts all Tigress XD 1-1/8” butt diameter center riggers
19 upper-arm angle/locking (@10 deg.) using Tigress XD 316 Stainless Steel tooth locking design with horizontal stops
Large ‘XD’ Aluminum 12mm thick base plate with four corner mounting
Extreme-duty 316 Stainless Steel and anodized aluminum construction
Ambidextrous mounting option to accommodate the side the tri-lobe knob is positioned on
Large 3-lobe UV ergonomic knob for changing and locking the outriggers’ elevation
Standard ¼” diameter stainless steel locking push-in-pin for outriggers
¼” through x 4.050” x 2.625” 4-bolt pattern
3-Year Limited Warranty
|
368.46 |
|
|
XD Top Mount System - XD 15' Aluminum Silver & Elite Rigging Kit
Features:
XD Top Mount
Tigress Track® telescoping outriggers
Premium rigging kit
Black mesh carry bag for storage
Specifications:
Mount: XD Top Mount
Outrigger: 15' Silver XD
Rigging Kit: Elite
|
1928.80 |
|