|
ZCI™ Zero Contact Interface Universal ModuLite® - Universal Trailer Light Power Module
ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12 volt system only.
Features:
NO CUTTING OR SPLICING VEHICLE WIRING!
Isolates Trailer Light Operation from Tow Vehicle's Electrical System
Works with 2 or 3 wire systems
Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup
Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
Works with low side switched vehicles
Integrated auto resetting short & overload protection
Robust design allows for interior or exterior mounting
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
211.04 |
|
|
ZCI™ Zero Contact Interface Universal ModuLite® & Installation Kit
ZCI sensor technology and direct connection to the tow vehicle battery, eliminates all electrical connection and interference with the tow vehicle electrical system. Vehicles with 12 volt system only.
Features:
No cutting or splicing vehicle wiring
Isolates Trailer Light Operation from Tow Vehicle's Electrical System
Works with 2 or 3 wire systems
Works with PWM or Multiplexed systems requiring 2 or 3 wire hookup
Rated for up to 4.2 amps for turn/stop & 7.5 amps for taillight trailer circuits
Works with low side switched vehicles
Integrated auto resetting short & overload protection
Robust design allows for interior or exterior mounting
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
226.19 |
|
|
ZCI™ Zero Contact Interface Universal Trailer Light Power Modulite® Wiring Kit
Wiring Kit for Installing #119146, #119147, #119176, #119177, #119179, #119180, #119190, #119192 ModuLite® Power Modules, Includes 20 ft. Undercar Wire, Fuse w/Holder and Attaching Terminals
Features:
Wiring kit for installing all Modulites
Includes 10 AMP fuse
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.46 |
|
|
Safety First when it comes to Trailer Lighting
Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.
The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.
Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses.
We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.
CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.
Specials Closeouts Remanufactured Rebates
|
|
|
"ZERO EMI” Recessed 3.5” LED Light - Polished Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Polished Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White, Blue with Polished Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White w/Brushed Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White, Red with Brushed Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White, Blue with Brushed Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White with White Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
67.18 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White, Red with White Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
“ZERO EMI” Recessed 3.5” LED Light - Warm White, Blue with White Stainless Steel Bezel - 12VDC
“ZERO EMI” Indoor / Outdoor Recessed 3.5” LED Light 2700K 85 CRI Dimmable LED Replaces 50W Halogen
NO EMMISSIONS
All light, no EMI! With Zero radio emissions these lights can’t interfere with your communication and navigation equipment. Powerful without the hot spots. The 0A series produces a soft, high color rendering light that fills the area. Comes in Polished, Brushed and White finish with frosted lens. Digitally dimmable designed into the electronics means you will not need special circuitry. Three screw mounting compatible with the most popular models. Warm White or Warm White/Red available. Two or Three wire configurations. Simply reverse polarity to switch between colors or wire both white and red directly.
Features:
Zero AIS & VHF Interference
Lower profile design then other halogen and LED offerings.
600 Lumen, 2700K Warm White, >85CRI
IP65 Indoor/Outdoor
|
74.41 |
|
|
MS-CRGBWRC LED Lighting Control Module/Remote for Signature Series 3
The MS-CRGBRC wireless remote lets you take control of your on-water experience to adjust the lighting of your Fusion Signature Series 3 speakers and subwoofers.
Wireless Control of Your LED Illumination
Enjoy full control of the illumination of your Fusion RGB speakers and subwoofers with the MS-CRGBRC wireless remote control. The remote is portable and will function up to 10m from the speaker lighting control module.
Static and Dynamic Color Options
A range of colors are available in both static and dynamic modes with the RGB speakers to complement your music and enhance your on-board audio entertainment experience. Simply select any color on the remote’s color wheel or change modes to cycle automatically through predefined lighting patterns.
Intuitive Touch Controls
Adjusting the lighting of your Fusion RGB speakers is made easy with touch controls including an intuitive color-select wheel.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.78 |
|
|
4-Channel Underwater Light Relay Module
The SCM-PD4CH is a 4-position power distribution box that provides a convenient way to connect up to 4 Shadow-Caster™ underwater lights. Digital over-current protection for each output ensures the safe operation of multiple lights and provides an easy way to manage the relatively high current switching needs of multiple light installations.
The SCM-PD4CH is housed in a compact waterproof box that is ideal for mounting in the bilge and wet locations.
Features:
Compact remote power control box
Green/red LED indicates the status of each output channel
Individual digital over-current protection for each channel
Compatible with Shadow-Caster™ single and multi-color lights
Recommended when installing two or more underwater lights
Can be used with a helm-mounted switch or with no switch when using a compatible Shadow-Caster™ controller
Blue Shadow-Caster™ backlight indicates the state
3-Year Warranty
Specifications:
Compatible with 12 or 24V systems
Up to 10 amps per channel
5/16-18” power lugs
IP67 wash down rated enclosure
What's Included?
4 position power control box
Mounting hardware 4 #8 PH SS x.5”
|
298.80 |
|