AnchorSnubber 20" Long Eases the tension on the anchor chain, rode or snubber line. Eliminates chain noise and shock loads to chain, anchor roller, windlass, cleats.

Shockles LineSnubber 20" Long Eliminates shock loads on dock lines, towing lines, tie-downs and preventers. Progressive tension design with internal stretch limiter.

T-Handle Latch - Chrome Plated Zamac/Black Nylon - Locking - Freshwater Only Features: Nylon Body and CP Zamac handle Locking T-Handle latch Short Offset Cam Bar Nylon body is Black Neoprene O-ring & Key fastener included Surface Depth - 1/8"-3/4" Diameter - 3" Cut-Out - 2-1/2" Chrome Plated Zamac parts should be installed on fresh water boats only

T-Handle Latch - Chrome Plated Zamac/Black Nylon - No Lock - Freshwater Use Only Features: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is Black Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

T-Track Endstop for 1" Track - Black 1" Black Endstop

Shockles LineSnubber 20" Long Eliminates shock loads on dock lines, towing lines, tie-downs and preventers. Progressive tension design with internal stretch limiter.

MiniShockle 12" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord.

MiniShockle 18" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord.

MiniShockle 24" Long This is a bungee cord on steroids! MiniShockles hold up to 300lbs to protect your valuable gear. Ten times stronger than a standard bungee cord.

DockShockle Designed for smaller, lighter boats up to 40'. DockShockle is 16" Long. Includes two special mini-LineGrabbers for quick and easy attachment.

Blacksmith Olympic Boat Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Feature precise balance – Olympic Boat Carbon Fiber Wind Vane is effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade carbon masthead wind vane for boats up to 20 ft 9×9 in / 23×23 cm 0.5 oz / 13.9 g 3D carbon & duraluminum J-base for side, top, or front mounting

Blacksmith Sport Boat Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Features: Handmade carbon masthead wind vane for 16-28 ft boats 9×10 in / 23×25 cm 0.7 oz / 20 g 3D carbon & duraluminum J-base for side, top, or front mounting

Blacksmith Horizontal Carbon Fiber Wind Vane Bring your sailing experience to a new level Davis Instruments introduces Blacksmith Wind Vanes, made from super lightweight 3D carbon fiber and duraluminum to withstand the rigors of hard racing. Horizontal is a dinghy race pro gooseneck wind vane for Laser, Finn, Banshee, Sunfish, Optimist, El Toro and Sabot. Feature precise balance – effective and efficient in 0.8 knot up to 40 knots wind conditions. Features: Handmade dinghy carbon gooseneck wind vane 12×7.8 in / 30×20 cm 0.8 oz / 25 g 3D carbon & duraluminum Adjustable mast clam

40" Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0 Anyone who knows trucks knows lighting, and how valuable it is to be able to see whats flying at them. Plenty of companies offer LED single-row light bars, but when users are deep in the woods, far out of town, and miles away from anything resembling help, are they willing to take that risk? With this 40-inch light bar, equip 5W high-quality LEDs with a combo light spread! This Jeep LED bar boasts an IP69K rating (the highest attainable rating). The single-row light bar gives users 40 inches of solid security, powder coated in reassurance that they aren't driving home in the dark. With the highest grade standard on the market, don't settle for just strong; demand Black Oak Strong! Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Combination Flood/Spot light pattern offers a superior lighting pattern Activities & Uses:  Off-roading UTV roof mount Industrial flood light Roof rack lighting Behind the grill light Technical Specifications: Total Wattage: 200W Amp. Draw: 14.6 LED Quantity: 40 Weight: 11.4 lbs. Raw Lumens: 26,400 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 43" x 2.6" In the Box: 40” light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

G-Force ELIMINATOR Black Prop Nut for Garmin Force Trolling Motor One of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.  Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life.  Made to fit Garmin Force trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending