|
Replacement Garboard Drain Plug Only *2-Pack
Provides bilge drainage when hauling out and the nut removed with a wrench or pliers.
Features:
Machined tapered pipe threads ensure a watertight plug fit
3/8" neck depth
Specifications:
Construction: Brass
*Sold as a package containing two drain plugs
|
11.99 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Livewell/Bailer Drain Plug - 1/2"
A clockwise turn of the handle tightens the plug and the lever flips down to lock. This plug is ideal for livewell drains.
Features:
Cam-action neoprene plugs snap shut to form a stopper for livewells/baitwells
Brass snaps and plates
1/2" inner diameter thru-hull
*Not for use with chemicals or fuels
|
8.70 |
|
|
Garboard Drain Plug Cast Bronze
Attwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.
|
13.07 |
|
|
Stainless Steel Garboard Drain Plug - 7/8" Diameter
The Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost.
Features:
High-polished #316 stainless steel reduces corrosion
Large 7/8" (27mm) hole for servicing stern drives
*Gasket not included
|
26.82 |
|
|
Oblong Captive Garboard Drain & Plug - 316 Stainless Steel
This Oblong Captive Garboard Drain & Plug sits lower in the stern for more water removal. Captive plug prevents plug from being lost. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two #8 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.13 |
|
|
Drain Plug Only - Plastic Nylon
Features:
Plug to suit RF294 & RF737
Water tight seal
Retaining legs
UV Stabilized Nylon plug
|
5.74 |
|
|
Replacement Cable for Trolling Motor Pull Rope
Never worry about that trolling motor pull rope breaking again. This stainless steel vinyl coated braided cable is used to replace the manufacturer's pull rope on your trolling motor. This replacement cable will not rust, break or rot. It comes with complete, easy to follow installation instructions. Don't wait for your rope to break, replace it with this durable steel cable now.
|
16.30 |
|
|
Large End Plug - White *2-Pack
PVC end plugs insert into ends of single P profile. Encapsulates air and completes the air cushion system. Easily installed on profiles using any standard PVC solvent.
Features:
End plugs contain fungicides and UV inhibitors
Easily installed on profiles using any standard PVC solvent
2 end caps per pack
Encapsulates air and completes the air cushion system
|
8.65 |
|
|
Replacement Hinge For Igloo Coolers - 2 Pack
Cooler Shield Type I Hinges are compatible with the Igloo® Universal Hinge - Item #9360. Compatible with the following cooler sizes: 28, 36, 40, 48, 54, 72, 94, 128, 162. Patented. Cooler Shield Replacement Hinges are designed to replace Igloo® factory installed hinges. Cooler Shield Hinges are guaranteed for the life of your cooler. If your Cooler Shield Hinge fail, we will replace them. Cooler Shield Hinge's unique heavy duty design and lifetime warranty differentiates them from the original factory installed cooler hinge. This improved design requires no drilling. The only tool you need is a #2 phillips screwdriver. The included Stainless Steel screws are larger than the original screws which allow re-use of the factory holes. In stock. Same Day Shipping.
The hinges are: UV resistant, food safe, recyclable, Made in USA, self lubricating, corrosion resistant. The hinge pin and screws are 316 Stainless Steel. The Igloo® compatible design is a heavy duty design that utilizes additional hole locations in the cooler body for extra strength. Hinges feature an auto stop design to a neutral rest position for the lid.
|
12.00 |
|
|
Inteliplug ProX Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail
The Seaview Inteliplug ProX is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProX comes with a hermetically sealed aeronautical grade sensor with Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
52.80 |
|
|
Inteliplug ProXT Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail with Plug-and-Play Harness
The Seaview Inteliplug ProXT is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProXT comes with a hermetically sealed aeronautical grade sensor with a Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
Sensor with Deutsch DT04-2P plug pigtail including plug-and-play wire harness and alarm panel
|
129.60 |
|
|
Inteliplug Pro Captive Drain Plug & Garboard Assembly
The Seaview Inteliplug Pro is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, and 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
28.80 |
|
|
G-Force Trolling Motor Handle & Cable w/Trolling Motor Clamp - Red
Endorsed and proven by Gerald "G-Man" Swindle.
The patented G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology.
This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors.
Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy!
As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.
*NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.12 |
|
|
G-Force Trolling Motor Handle & Cable - Black
Endorsed and proven by Gerald "G-Man" Swindle.
The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology.
This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors.
Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy!
As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.
*NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.94 |
|