Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

12 Volt trolling motor plug and receptacle with two prong connection. 8 gauge wire, 6" length. Packaged.

G-Force Grass Goat Trolling Motor Weed Guard for Motorguide Trolling Motors A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions. Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today. Features: Keeps your trolling motor clear of debris Genuine Marine Grade Starboard Mounting Plate Stainless Steel Cutting-Blade NOTE: This product is not compatible with Minn Kota Edge motors WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable w/Trolling Motor Clamp - Red Endorsed and proven by Gerald "G-Man" Swindle. The patented G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable - Black Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS* WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Trolling Motor Handle & Cable  - Red Endorsed and proven by Gerald "G-Man" Swindle. The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors. Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy! As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations. *NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Motorguide Trolling Motor One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

24 volt trolling motor plug and receptacle with three prong connection. 8 gauge wire, 6" length. Packaged.

12 volt trolling motor plug and receptacle. 6", 8 gauge wire. Display packaged.

12 volt trolling motor plug and receptacle with 2 prong connection. 6", 10 gauge wire. Packaged.

24 volt trolling motor plug and receptacle for 3-wire connections. 6", 10 gauge wire. Packaged.

March TE-7S-MD 1.5hp 3 phase March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.   Perfect for Applications Including; Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   Great for Chemicals Including The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride,  Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.     Unit 60HZ 50HZ System US Metric US Metric Max Flow 53 GPM 200 LPM 47.5 GPM 180 LPM Max Head 57.5 FT 17.5 M 39.4 FT 12 M Power 1 HP .745 KW 1 HP .745 KW Electrical 1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts. On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor Options Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof P/N 0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket P/N 0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket P/N 0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket P/N 0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket P/N 0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket P/N 0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket  

Sierra Mercury and Mariner clip style fuel fittings.

Sierra Mercury & Mariner bayonet style fuel fittings.

Sierra fuel fittings for Yamaha.