|
Mercury Twist-Lock Female Tank Fitting - Nylon
This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects on the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6.
Features:
Provides precise installation of a fuel line to a Mercury/Mariner-brand engine
1/4" NPT (National Pipe Thread)
2-piece fitting with a 90-degree elbow
Material Construction: Nylon
*Specifically mates to Attwood part numbers: 8892-6 & 14532-6
|
11.60 |
|
|
Mercury Twist-Lock Female Tank Fitting - Zinc
This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects to the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6.
Features:
Provides precise installation of a fuel line to a Mercury/Mariner-brand engine
1/4" NPT (National Pipe Thread)
2-piece fitting with a 90-degree elbow
Material Construction: Zinc
*Specifically mates to Attwood part numbers: 8892-6 & 14532-6
|
13.74 |
|
|
Mercury Twist-Lock Male Hose Fitting - Zinc
This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 3/8" I.D. hose. Clamps are not included. Use thread sealant on all threads.
Features:
Mercury/Mariner fuel fitting
(inch) 3/8" Barb
Material Construction: Die-cast zinc
*Specifically mates to Attwood part numbers: 8882-6 & 14530-6
|
8.75 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" Barb
For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.
Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6
|
5.69 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" Barb
For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.
Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6
|
4.64 |
|
|
27"-48" Twist-Lock Steering Control Arm Fits 7/8"-1" Wheels
Forespar's quick-release Steering Control Arm extends functional range when behind the wheel. Made specifically for use while motoring or easy sailing, the control arm allows the driver to move away from the helm station and still control the steering.
This extended range of movement has two specific benefits. First, it enhances safety by allowing the helmsman to move outboard to the rail, increasing their forward sightline. This is especially helpful when trying to see around large headsails. Second, it allows for a number of new sitting positions for additional comfort. On many boats this means the driver can now safely relax on the stern rail seat.
The Forespar Steering Control Arm uses a twist-lock extension with a special quick-release attachment clamp mounted to the wheel. It installs in seconds and can be easily deployed or removed with the simple push of a button.
|
177.47 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPT
This Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.
Features:
Johnson, Evinrude, and OMC fitting
Quick-connect ¼-inch male thread makes installation easy
Solid machined brass for dependable performance, peace of mind
*Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6
|
7.40 |
|
|
Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.
|
7.02 |
|
|
Aluminum Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Aluminium Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt or brackish water. Mercury part number 826134.
|
4.96 |
|
|
Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6
It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Hose and tank fittings come with pre-applied thread sealant
For Mercury engines and tanks
Tank Side: Universal Sprayless Quick-Connect
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998)
This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6
For Mercury Pre-1998 engines and tanks
It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant)
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
|
46.14 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6
Universal for any engines and tanks
In-Line Fuel Demand Valve
The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
46.14 |
|
|
Mercury Female Hose Tank Fitting - 3/8" Barb
Connect your tank and fuel lines with confidence; the durable Acetal construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.
Features:
Easy installation with barbed fittings for 3/8 inch I.D. (interior diameter) hose (purchase hose clamps separately)
Mercury/Mariner Tank Fitting
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
(inch) 3/8" Barb
Hose Female
*Specifically mates to Attwood part number: 8873-6
|
7.67 |
|
|
Mercury/Yamaha Female Hose Engine Fitting - 3/8" Barb
Connect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.
Features:
Solid machined brass for dependable performance, peace of mind
Hose female
Tank or Engine End
Replaces Yamaha 6Y1-24305-03
*Specifically mates to Attwood part number: 8897-6
|
4.64 |
|